Omron NA-series Instructions d'utilisation

Programmable Terminal NA Series

Practice Guide

IAG Collection for NXR-ILM

IO-Link Master Unit Monitor

NA5-15

□

101

□

NA5-12□101□

V458-E1-01

■ Introduction

This guide describes reference information to create and use IAG objects. It does not provide safety

information for an entire system.

Be sure to obtain the manuals for NA Series Programmable Terminal, read and understand the

safety points and other information required for use, and test sufficiently before actual use of the

equipment.

Terms and Conditions Agreements

Thank you for your usage of products of Omron Corporation (“Omron”). Without any special

agreements, these terms and conditions shall apply to all transactions regardless of who

sells.

Definitions of Terms

Omron product(s): Omron’s factory automation system devices, general control devices,

sensing devices, and electronic/mechanical components.

- Catalogs: Any and all catalogs (including “Best Components” and other catalogs),

specifications, instructions and manuals relating to Omron products, including

electronically provided data.

- Conditions: Use conditions, rating, performance, operating environment, handling

procedure, precautions and/or prohibited use of Omron products described in the

catalogs.

- User application(s): Application of Omron products by a customer, including but not

limited to embedding/using Omron products into customer’s components, electronic circuit

boards, devices, equipment or systems.

- Conformity: (a) conformity, (b)performance, (c) no infringement of intellectual property of

third party, (d) compliance with laws and regulations, and (e) conformity to various

standards of Omron products in user applications.

Note about Descriptions

Rating and performance is tested separately. Combined conditions are not warranted.

- Reference data is intended to be used just for reference. Omron does NOT guarantee that

the Omron Product can work properly in the range of reference data.

- Examples are intended for reference. Omron does not warrant the conformity in usage of

the examples.

- Omron may discontinue Omron products or change specifications of them because of

improvements or other reasons.

Note about Use

Adopt and use Omron products considering the following cautions.

- Use the product in conformance to the conditions, including rating and performance.

- Check the conformity and decide whether or not Omron products are able to be adopted.

Omron makes no guarantees about the conformity.

- Make sure in advance that electricity is properly supplied to Omron products and they are

set up rightly in your system for intended use.

- When you use Omron products, ensure the followings: (i) allowance in aspect of rating

and performance, (ii) safety design which can minimize danger of the application when the

product does not work properly, (iii) systematic safety measures to notify danger to users,

and (ⅳ) periodical maintenance of Omron products and the user application.

- Omron assumes no responsibility for any direct or indirect loss, damage and expense

resulting from infection of our products, installed software, any computer devices,

computer programs, network, and databases with the followings: DDoS attack (distributed

DoS attack); computer virus and other technically harmful program; and unauthorized

access.

Please conduct the followings by yourself: (i) antivirus software, (ii) data input/output, (iii)

lost data recovery, (ⅳ) protections against computer virus that contaminate Omron

products or the installed software, and (ⅴ) measures to protect Omron products from

unauthorized access.

- Omron products are designed and manufactured as commodity for general industrial

products. For this reason, the usages (a) to (d) are to be unintended. Omron makes no

guarantees on Omron products, if you use Omron products for those purposes. However,

special applications that Omron expects or usages with especial agreement are excluded.

(a) Applications requiring high-level safety (e.g. nuclear control facilities, combustion

facilities, aerospace and aviation facilities, railroad facilities, elevating facilities,

amusement facilities, medical facilities, safety devices or other applications which has

possibility to influence lives or bodies)

(b) Applications requiring high reliability (e.g. gas/water/electricity supply system, 24-hour

operating system, applications handling with rights/property, such as payment system)

potential of chemical contamination or electromagnetic interference, facilities with vibration

or impact, facilities on continual operation for a long period).

(d) Applications under conditions or environment which are not described in the catalogs

- Omron products in the catalogs are not intended to be used in automotive applications

(including two-wheel vehicles). Please DO NOT use Omron products in automotive

applications. Contact our sales personnel for automotive products.

Warranty

Warranty of Omron products is subject to followings.

-Warranty Period: One year after your purchase.

However, except when there is a separate statement in the catalogs.

-Coverage: Omron will provide one of the services listed below, on the basis of Omron’s

decision.

(a) Free repairing of the malfunctioning Omron products (except electronic/mechanical

components) at Omron maintenance service sites.

(b) Free replacement of the malfunctioning Omron products with the same number of

substitutes.

-Exceptions: This warranty does not cover malfunctions caused by any of the followings.

(a) Usage in the manner other than its original purpose

(b) Usage out of the conditions

(d) Remodeling/repairing by anyone except Omron

(e) Software program by anyone except Omron

(f) Causes which could not be foreseen by the level of science and technology at the

time of shipment of the products.

(g) Causes outside Omron or Omron products, including force majeure such as disasters

Limitation of Liability

The warranty described in this Terms and Conditions Agreements is a whole and sole

liability for Omron products. There are no other warranties, expressed or implied.

Omron and its distributors are not liable for any damages arisen from or relating to Omron

products.

Export Control

Customers of Omron products shall comply with all applicable laws and regulations of other

relevant countries regarding security export control, in exporting Omron products and/or

technical documents or in providing such products and/or documents to a non-resident.

Omron products and/or technical documents may not be provided to customers if they

violate the laws and regulations.

Table of Contents

Terms and Conditions Agreements...................................................................3

Table of Contents ................................................................................................6

１Related Manuals..........................................................................................7

２Precautions .................................................................................................8

３Overview....................................................................................................10

３-１Overview ........................................................................................................... 10

３-２System Configuration......................................................................................... 11

４Library Versions........................................................................................12

５IAG Descriptions.......................................................................................13

５-１IOStatus_Monitor............................................................................................. 13

５-２EIPStatus_Monitor.............................................................................................. 21

５-３DCVoltage_Monitor.......................................................................................... 28

５-４MultiStatication_Viewer...................................................................................... 36

５-５Displaying Multiple IAG Screens and Linking Them to EIP Monitor Screen...... 44

Revision History ................................................................................................50

１Related Manuals

No.

Model

Title

V117 NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

Programmable Terminal NA Series Hardware USER’S

MANUAL

V118

NA5-15W□□□□(-V1)

NA5-12W□□□□(-V1)

NA5-9W□□□□(-V1)

NA5-7W□□□□(-V1)

Programmable Terminal NA Series Software USER’S

MANUAL

V119

NA5-15W□□□□(-V1)

NA5-12W□□□□(-V1)

NA5-9W□□□□(-V1)

NA5-7W□□□□(-V1)

NA-RTLD□□

Programmable Terminal NA Series Device Connection

USER'S MANUAL

V120

NA5-15W□□□□

NA5-12W□□□□

NA5-9W□□□□

NA5-7W□□□□

Programmable Terminal NA Series STARTUP GUIDE

V125 NA5-15□101□-V1

NA5-12□101□-V1

NA5-9□001□-V1

NA5-7□001□-V1

Programmable Terminal NA Series Hardware (-V1)

USER’S MANUAL

W504

SYSMAC-SE2□□□

Sysmac Studio Version 1 OPERATION MANUAL

２Precautions

(1)When building an actual system, check the specifications of the component devices

of the system, use within the ratings and specified performance, and implement

safety measures such as safety circuits to minimize the possibility of an accident.

(2)For safe use of the system, obtain the manuals of the component devices of the

system and check the information in each manual, including safety precautions,

precautions for safe use.

(3)It is customer’s responsibility to check all laws, regulations, and standards that the

system must comply with.

retrieval system, or transmitted, in any form, or by any means, mechanical,

electronic, photocopying, recording, or otherwise, without the prior written permission

of OMRON.

(5)The information in this guide is current as of March 2020. It is subject to change

without notice because of product’s update.

(6)This IAG library has been tested with the system configuration in 3-2 “System

Configuration.” However, Omron does not guarantee screen operations after

embedding the IAGs.

Special information in this document is classified as follows:

Precautions for Safe Use

Describes precautions on what to do and what not to do to ensure proper

operation and performance.

Precautions for Correct Use

Describes precautions on what to do and what not to do to ensure proper

operation and performance.

Additional Information

Additional information to read as required.

This information is provided to increase understanding or make operation

easier.

Copyrights and Trademarks

Sysmac® is the trademark or registered trademark of Omron Corporation in

Japan and other countries for Omron factory automation products.

Screenshots are used in accordance with Microsoft Corporation guidelines.

Windows and Visual Basic are registered trademarks of Microsoft

Corporation in the United States and other countries.

EtherCAT® is a registered trademark and patented technology, licensed by

Beckhoff Automation GmbH, Germany.

EtherNet/IP™ and CIP Safety™ are trademarks of ODVA, Inc.

Company names and product names in this document are the trademarks or

registered trademarks of their respective companies.

３Overview

３-１Overview

This document describes IAG collections that directly read the information from the

NXR-ILM Unit, IO-Link master unit connected with the NA Series HMI via EtherNet/IP.

•IAG external specifications

•IAG installation on a screen

IAG

Icon

Description

IOStatus_Monitor

Monitors conditions of LEDs and IO

ports.

EIPStatus_Monitor

Monitors EtherNet port connections

and FCS errors and logs them.

DCVoltage_Monitor

Monitors input/output power supply

voltage and logs them.

MultiStatication_Viewer

Illustrates logs of FCS errors or power

supply voltages in a graph.

These IAGs are included in the IAG collection file below.

File name

Description

NXR_ILM_Monitor_12inch_*.iag

For 12 and 15-inch units. “*” stands for a version.

Ask the Omron sales representative for the file.

Autres manuels pour NA-series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Omron Terminal tactile

Omron

Omron WT30 Manuel utilisateur

Omron

Omron NT31 Series Manuel d'installation

Omron

Omron NT4S Manuel utilisateur

Omron

Omron NA-series Instructions d'utilisation

Omron

Omron NT20 Manuel utilisateur

Omron

Omron NB3Q-TW**B series Manuel d'installation et d'exploitation

Omron

Omron 8025G Manuel utilisateur

Omron

Omron NV3Q Series Manuel d'instructions

Omron

Omron NS - REV 04 Manuel utilisateur

Omron

Omron NXR-ILM08C-EIT Manuel utilisateur

Omron

Omron NT21 Guide de l'utilisateur

Omron

Omron NT20S Manuel utilisateur

Omron

Omron NT631 Series Manuel utilisateur

Omron

Omron Sysmac NA Series Manuel utilisateur

Omron

Omron NXR Series Manuel utilisateur

Omron

Omron Programmable Terminals NT31 NT31C Guide de l'utilisateur

Omron

Omron NXR-ILM08C-ECT Manuel utilisateur

Omron

Omron PC CONNECTION - 04-1997 Manuel utilisateur

Omron

Omron Programmable Terminals NT631 Guide de l'utilisateur

Omron

Omron NS10-TV Series Guide de l'utilisateur

Omron

Omron NA5-15*101 series Guide de l'utilisateur

Omron

Omron NA5-15W101S-V1 Manuel utilisateur

Omron

Omron DeviceNet DRT2-AD04 Manuel utilisateur

Omron

Omron NT20S Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur