NXP Semiconductors PN7150 Manuel utilisateur

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

Rev. 1.2 — 25 July 2018

373112

Application note

COMPANY PUBLIC

Document information

Info

Content

Keywords

OM5578, PN7150, BeagleBone, NFC, P2P, Card Emulation, Linux,

Android

Abstract

This document gives a description on how to get started with the OM5578

PN7150 NFC Controller SBC Kit on BeagleBone Black platform.

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

2 of 16

Contact information

For more information, please visit:

http://www.nxp.com

Revision history

Rev

Date

Description

1.2

20180725

Updated weblinks

1.1

20170222

Updated demo images weblinks

1.0

20150518

First official release version

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

3 of 16

1. Introduction

This document gives a description on how to get started with the OM5578 PN7150 NFC-

Controller SBC Kit on BeagleBone Black platform. This document provides a step by

step guide to the installation procedure of the hardware and the software. Finally, it

shows PN7150 NFC Controller functionalities through demonstration application.

1.1 OM5578/PN7150BBB demo kit

OM5578/PN7150BBB kit is a high performance fully NFC compliant expansion board for

BeagleBone Black (refer to [1] for more details). It meets compliance with Reader mode,

P2P mode and Card emulation mode standards. The board features an integrated high-

performance RF antenna to insure high interoperability level with NFC devices.

The demo kit is comprised of a PN7150 NFC Controller Board, a dedicated interface

board, and a NFC Sample Card.

OM5578/PN7150S

PN7150 NFC Controller Board

OM29110BBB

BeagleBone Interface Board

NTAG216

NFC Sample Card

Fig 1. OM5578/BBB kit overview

The demo kit is fully described in UM10935 document [4].

1.2 Linux driver support

PN7150 NFC Controller is supported under GNU/Linux system using the NXP Linux

libnfc-nci software stack delivered through public GitHub repository

https://github.com/NXPNFCLinux/linux_libnfc-nci (for more details, refer to AN11697 [2]).

1.3 Android driver support

PN7150 NFC Controller is supported from the official Android Open Source Project (refer

to [5] for more details) with the addition of dedicated patches (refer to AN11690 [3]).

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

4 of 16

2. Quick Startup on BeagleBone

2.1 Required items

• BeagleBone Black [1]

• MicroSD card of at least 4 Gb (8 Gb for Android demo image)

• 5V adapter to power the BeagleBone (Note:Micro USB cable doesn’t provide the 5V

required by the antenna supply of the OM5578/PN7150S board. Without it no RF

field can be generated by the OM5578).

• USB Keyboard

• USB Mouse

• USB Hub to connect both Mouse and Keyboard to the BeagleBone

• HDMI cable to connect to a Monitor / TV

• Computer (running Windows, Linux or Mac OS X) for MicroSD card installation

• BeagleBone demo image file (see [6])

2.2 Hardware setup

First of all, assemble the PN7150 NFC Controller Board with the BeagleBone Interface

Board.

Fig 2. OM5578/PN7150S BeagleBone configuration

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

5 of 16

Then stacked together the boards with the BeagleBone.

Fig 3. OM5578/PN7150S and BeagleBone Black stacked together

2.3 Software setup

Prepare a MicroSD card, with the downloaded BeagleBone demo image (see [6]),

following the installation guidelines. First extract the “.img” file from the archive, then

flash it on the microSD card according to below guidelines.

2.3.1 On Windows

Insert the MicroSD card into your computer (note the device drive letter), and using

Win32 Disk Imager, write the image into it:

Fig 4. Win32 Disk Imager

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

6 of 16

2.3.2 On Linux

Insert the MicroSD card into your computer and determine the device node assigned to it

(ignore the device number; e.g. /dev/sdb, not sdb1):

$ sudo dmesg | tail -20

[95300.848154] usb 2-1: new high-speed USB device number 33 using ehci-pci

[95300.983859] usb 2-1: New USB device found, idVendor=14cd, idProduct=6d00

[95300.983872] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2

[95300.983880] usb 2-1: Product: USB 2.0 SD/MMC READER

[95300.983888] usb 2-1: Manufacturer: SDMMC M121

[95300.983895] usb 2-1: SerialNumber: 800340070270

[95300.984593] usb-storage 2-1:1.0: USB Mass Storage device detected

[95300.984882] scsi18 : usb-storage 2-1:1.0

[95301.985555] scsi 18:0:0:0: Direct-Access USB 2.0 SD/MMC Reader PQ: 0 ANSI: 0 CCS

[95301.986856] sd 18:0:0:0: Attached scsi generic sg2 type 0

[95301.988277] sd 18:0:0:0: [sdb] Attached SCSI removable disk

Fig 5. Identifying device number under Linux

Then, unmount the device node using following command:

sudo umount /dev/devicenode

Finally flash the image to the device node using following command:

sudo dd if=path_to_image_file.img of=/dev/devicenode bs=1M

2.3.3 On MAC OS X

Using PiFiller (see https://learn.adafruit.com/beaglebone-black-installing-operating-

systems/mac-os-x), select the image file then insert the MicroSD card into your computer

to flash it.

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

7 of 16

2.4 Linux NFC demo application

2.4.1 Application details

The demo application is part of the Linux libnfc-nci stack available on public GitHub

repository https://github.com/NXPNFCLinux/linux_libnfc-nci. The related source code can

then be found there (more details in document AN11697 [2]).

2.4.2 Starting Linux NFC demo

Insert the MicroSD card in the BeagleBone. Connect HDMI Display, mouse and

keyboard via the USB Hub. Finally supply the BeagleBone using 5V adapter.

The BeagleBone boots and displays the bone-debian GUI:

Fig 6. bone-debian GUI

Open a terminal and browse to the Linux libnfc-nci stack directory (refer to chapter 1.2 for

more details about the Linux NFC software stack).

$ cd ~/linux_libnfc-nci

The application requires parameters to run:

$ ./nfcDemoApp <OPTIONS>

You can get the parameters details by launching the application help menu:

$ ./nfcDemoApp –-help

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

8 of 16

Fig 7. Linux demo application commands

The demo application offers 3 modes of operation:

•Polling: continuously waiting for a remote NFC device (tag or peer device) and

displays related information

•Tag writing: allows writing NDEF content to a NFC tag

•Device push: allows pushing NDEF content to a remote NFC peer device

2.4.2.1 Polling mode

When in this mode, the application will display information of any discovered NFC tags or

remote NFC device.

It is reached starting the application with “poll” parameter:

$ ./nfcDemoApp poll

Fig 8. Linux demo application polling mode

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

9 of 16

2.4.2.2 Tag writing mode

This mode allows writing data to an NFC tag. It is reached using “write” parameter:

$ ./nfcDemoApp write <OPTIONS>

Fig 9. Linux demo application tag writing mode

You can get more information about the message format using “-h” or “--help” parameter:

$ ./nfcDemoApp write –-help

2.4.3 Device push mode

This mode allows pushing data to a remote NFC device (e.g. an NFC phone). It is

reached using “push” parameter:

$ ./nfcDemoApp push <OPTIONS>

NXP Semiconductors

AN11842

PN7150 BeagleBone Black SBC Kit Quick Start Guide

AN11842

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 1.2 — 25 July 2018

373112

10 of 16

Fig 10. Linux demo application device push mode

You can get more information about the message format using “-h” or “--help” parameter:

$ ./nfcDemoApp push –-help

2.5 Android NFC demo

Insert the MicroSD card in the BeagleBone. Connect HDMI Display, mouse and

keyboard via the USB Hub. Finally supply the BeagleBone using 5V adapter.

After a few seconds Android boots up, NFC is then running, ready to read tags or interact

with remote NFC device (e.g. NFC phone).

Fig 11. Android home screen

Autres manuels pour PN7150

Table des matières

Autres manuels NXP Semiconductors Matériel informatique

NXP Semiconductors

NXP Semiconductors MCU-Link Pro Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MR-CANHUBK344 Instructions d'utilisation

NXP Semiconductors

NXP Semiconductors Symphony SoundBite Manuel utilisateur

NXP Semiconductors

NXP Semiconductors PCA9555 Manuel d'exploitation

NXP Semiconductors

NXP Semiconductors NavQPlus 8MPNAVQ-8G-G Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM15080-JN5189 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MCU-SMHMI-UG Manuel utilisateur

NXP Semiconductors

NXP Semiconductors FRDM-MCXA153 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM13488 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors UM10856 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors UM11650 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors winbond MCX-N9 BRK Series Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-PXS2010 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM13489 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors OM13321 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors i.MX 8M Plus Manuel utilisateur

NXP Semiconductors

NXP Semiconductors BFU520 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors i.MX 8M Mini LPDDR4 EVK Manuel utilisateur

NXP Semiconductors

NXP Semiconductors RD710 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors TWR-P1025 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors NavQPlus Manuel utilisateur

NXP Semiconductors

NXP Semiconductors S32G2 Manuel utilisateur

NXP Semiconductors

NXP Semiconductors MCUXpresso IDE MQX RTOS Mode d’emploi

NXP Semiconductors

NXP Semiconductors MCIMX7SABRE Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur