NXP Semiconductors AXIOM M52259DEMOCOM Manuel d'installation
DOC-0453-010, REV A
Email: www.axman.com
Support: [email protected]
M52259DEMOCOM
COM Expansion Board for use with
M52259DEMOMCU Board
HARDWARE
USER GUIDE
M52259DEMOCOM SEPTEMBER 10, 2008
USER GUIDE
2
CONTENTS
CAUTIONARY NOTES ..............................................................................................................4
TERMINOLOGY.........................................................................................................................4
FEATURES................................................................................................................................5
REFERENCES...........................................................................................................................6
OVERVIEW................................................................................................................................6
GETTING STARTED..................................................................................................................6
POWER......................................................................................................................................6
RESET........................................................................................................................................6
CONNECTORS..........................................................................................................................7
J3........................................................................................................................................... 7
UART0................................................................................................................................... 7
CAN_PORT................................................................................................................................7
USER OPTIONS ........................................................................................................................8
I/O PORT CONNECTOR............................................................................................................8
M52259DEMOCOM SEPTEMBER 10, 2008
USER GUIDE
3
FIGURES
Figure 1: Ethernet Status Indicators...........................................................................................7
Figure 2: Connector J1...............................................................................................................8
TABLES
Table 2: COM Connections ........................................................................................................7
REVISION
Date Rev Comments
September 10, 2008 A Initial Release.
M52259DEMOCOM SEPTEMBER 10, 2008
USER GUIDE
4
CAUTIONARY NOTES
1) Electrostatic Discharge (ESD) prevention measures should be used when handling this
product. ESD damage is not a warranty repair item.
2) Axiom Manufacturing does not assume any liability arising out of the application or use of
any product or circuit described herein; neither does it convey any license under patent
rights or the rights of others.
3) EMC Information on the M52259DEMOCOM board:
a) This device complies with FCC Rules, Part 15. Operation is subject to the following
conditions:
i) This device may not cause harmful interference, and
ii) This device must accept any interference received, including interference that may
cause undesired operation.
b) This product, as shipped from the factory with associated power supplies and cables,
has been verified to meet with FCC requirements as a CLASS A product.
c) This product is designed and intended for use as a development platform for hardware
or software in an educational or professional laboratory.
d) In a domestic environment, this product may cause radio interference in which case the
user may be required to take adequate prevention measures.
e) Attaching additional wiring to this product or modifying the product operation from the
factory default as shipped may effect its performance and cause interference with other
apparatus in the immediate vicinity. If such interference is detected, suitable mitigating
measures should be taken.
TERMINOLOGY
This development board uses option selection jumpers. A jumper is a plastic shunt that con-
nects 2 terminals electrically. Terminology for application of the option jumpers is as follows:
Jumper on, in, or installed - jumper is installed such that 2 pins are connected together.
Jumper off, out, or idle - jumper is installed on 1 pin only.
Cut-Trace – a circuit trace connection between component pads. The circuit trace may be cut
using a knife to break the default connection. To reconnect the circuit, simply install a suitably
sized 0-ohm resistor or attach a wire across the pads.
Signal names document followed by an asterisk (*) denote active-low signals.
M52259DEMOCOM SEPTEMBER 10, 2008
USER GUIDE
5
FEATURES
The M52259DEMOCOM is an expansion board designed to connect directly to the
M52259DEMOMCU board. The M52259DEMOCOM provides 10/100 Ethernet, RS-232, and
Hi-Speed CAN functionality. Board stack connectors mounted also support additional expan-
sion.
Features:
•10/100 Ethernet
•KZS8041 Ethernet PHY
•Configured for MII Operation
•Tab-down RJ-45 Connector w/ integrated
Magnetics
•Speed and Link Active Indicator LEDs
•RS-232 PHY
•1-Channel w/ Handshaking
•2-wire Operation
•DB-9 Connector
•HS CAN PHY
•1 Mbaud Transfer Rate
•Configured for Slave Mode operation
•3-pos Pin Header Connector
•IO signal Header
•40-pos Header
•Not populated
Specifications:
Board Size 2.0” x 2.0”
Power Input: Derived from M52259DEMOMCU board
M52259DEMOCOM SEPTEMBER 10, 2008
USER GUIDE
6
REFERENCES
Reference documents are provided on the support CD in Acrobat Reader format.
M52259DEMOCOM_UG.pdf M52259DEMOCOM User Guide (this document)
M52259DEMOCOM_SCH_B.pdf M52259DEMOCOM Schematic
M52259DEMOCOM_Silk_B.pdf M52259DEMOCOM Top Silkscreen
OVERVIEW
The M522259DEMO consists of the M52259DEMOMCU and the M52259DEMOCOM boards
connected via 0.5mm stack connectors. The M52259DEMO allows the user to easily add
functionality by simply matching the stack connector pin-out.
The M52259DEMOMCU board features the MCF52259 ColdFire microcontroller. An, open-
source, USB-BDM has been integrated to simplify application development and debug. A
USB port with mini-AB USB connector is also provided. Four user LEDs and 2 user push but-
tons complete the M52259DEMOCOM board features. Additional MCU features are available
at the stack connector.
The M52259DEMOCOM board expands the M52259DEMO feature set. The
M52259DEMOCOM supports 10/100 Ethernet, high-speed CAN, and RS-232 functionality.
Please refer to the M52259DEMOCOM User Guide for details.
GETTING STARTED
To get started quickly, please refer to the M52259DEMO Quick Start Guide. This quick start
will illustrate connecting the board to a PC, installing the correct version of CodeWarrior De-
velopment Studio, and running a simple application.
POWER
Power for the M52259DEMOCOM board is provided through the stack connectors from the
M52259DEMOMCU board.
RESET
Reset to the Ethernet PHY is provided through the stack connectors from the
M52259DEMOMCU board.
M52259DEMOCOM SEPTEMBER 10, 2008
USER GUIDE
7
CONNECTORS
J3
An Ethernet connector at J3 supports 10/100 Ethernet network connectivity. The connector is
arranged tab-down and includes integrated magnetics. The Ethernet Port applies a Micrel
KZS8041 10/100 Ethernet PHY configured for MII operation only. The PHY connects to the
Fast Ethernet Controller (FEC) signals from the MCF52259 MCU on the M52259DEMOMCU
board.
Two, green, status indicators are provided to indicate network traffic connection status
Figure 1: Ethernet Status Indicators
SPD ON – 100BaseT connection, OFF – 10BaseT connection
LNK_ACT ON – indicates network traffic activity
UART0
A right angle, 9-pin Dsub connector supports serial communications to the target MCU on the
M52259DEMOMCU boards. The RS-232 PHY is connected to UART 0 on the target MCU. A
ferrite bead on shield ground provides conducted immunity protection. Handshaking signals
RTS and CTS are also routed to the target MCU. RTS is biased for handshaking during 2-wire
operation.
Table 1: COM Connections
MCU Port COM Signal UART0 CON-
NECTOR
UTXD0 TXD UART0 – 5
URXD0 RXD UART0 – 7
URTS0 RTS UART0 – 8
UCTS0 CTS UART0 – 7
CAN_PORT
A 3-pos connector at CAN_PORT provides CAN port access for the M52259DEMOCOM. A
TJA1050 device provides the CAN PHY interface. This device is capable of communicating up
to 1 Mbaud.
Differential CAN signal termination is applied. A 120-ohm termination resistor with option
jumper allows termination to be applied or removed. The CANT_EN option jumper applies or
removes the CAN termination.
M52259DEMOCOM SEPTEMBER 10, 2008
USER GUIDE
8
USER OPTIONS
The M52259DEMOCOM applies no user selectable options.
I/O PORT CONNECTOR
The IO Port connector consists of 2 stack connectors mounted on the bottom layer. These
connectors allow the M52259DEMOCOM to be easily expanded by simply adding functionality.
The figures below show the pin-out of connectors J1 and J2.
Figure 2: Connector J1
J1
+3.3V 1 2 RSTIN*
GND 3 4 RESET*
ICOC0 5 6 ICOC1
ICOC2 7 8 ICOC3
UTXD2/CANTX 9 10 URTS2*/I2C_SDA1
URXD2/CANRX 11 12 UCTS2*/I2C_SCL1
TIN1 13 14 TIN0
TIN3 15 16 TIN2
IRQ1* 17 18 IRQ7*
QSDO 19 20 PCS3
21 22 PCS2
QSDI 23 24 PCS0
SCK 25 26 SCL
SDA 27 28
AN0 29 30 AN1
AN2 31 32 AN3
AN6 33 34 AN7
AN5 35 36 AN4
GND 37 38 GND
+3.3V 39 40 +3.3V
Table des matières
Autres manuels NXP Semiconductors Matériel informatique
NXP Semiconductors
NXP Semiconductors MCX-N5 EVK Series Manuel utilisateur
NXP Semiconductors
NXP Semiconductors FRDM-MCXN947 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors OM13488 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors QorIQ LS1046A Manuel utilisateur
NXP Semiconductors
NXP Semiconductors UM10856 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors PCA9600 OM6293 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors QorIQ LX2160A Manuel utilisateur
NXP Semiconductors
NXP Semiconductors MCIMX93-EVKCM Manuel utilisateur
NXP Semiconductors
NXP Semiconductors i.MX6ULL Manuel utilisateur
NXP Semiconductors
NXP Semiconductors TWR-PXS2010 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors i.MX 8M Plus Manuel utilisateur
NXP Semiconductors
NXP Semiconductors LPC5536-EVK Manuel utilisateur
NXP Semiconductors
NXP Semiconductors Qorivva MPC5643L Manuel utilisateur
NXP Semiconductors
NXP Semiconductors I2C Bus AN11022 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors MCUXpresso IDE MQX RTOS Mode d’emploi
NXP Semiconductors
NXP Semiconductors i.MX 8MDQLQ Manuel utilisateur
NXP Semiconductors
NXP Semiconductors freescale MC92604 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors Freescale TWR-S12G240 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors OM15080-QN9090 Manuel utilisateur
NXP Semiconductors
NXP Semiconductors UM11650 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
