NCR EasyPoint 7401 Manuel d'installation

NCR EasyPoint 7401

Release 2.5

Hardware User's Guide

19797

NCR

B005-0000-1254

Issue H

The products described in this book are licensed products of NCR Corporation.

MicroTouch is a registered trademark of MicroTouch.

NCR and EasyPoint are registered trademarks of NCR Corporation.

Novell and Netware are registered trademarks of Novell, Inc.

Pentium is a registered trademark of Intel Corporation.

Power Mon II is a registered trademark of Systems Enhancement Corporation.

Sound Blaster is a registered trademark of Creative Technology, Ltd.

SoundFusion is a registered trademark of Cirrus Logic, Inc.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Symantic and Ghost are registered trademarks of Symantec Corporation in the United States and other

countries.

It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software,

and firmware become available. NCR, therefore, reserves the right to change specifications without prior

notice.

All features, functions, and operations described herein may not be marketed by NCR in all parts of the

world. In some instances, photographs are of equipment prototypes. Therefore, before using this document,

consult with your NCR representative or NCR office for information that is applicable and current.

To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization,

and value of this book.

Address correspondence to:

Manager, Information Products

NCR Corporation

2651 Satellite Blvd.

Duluth, GA 30096

By NCR Corporation

Dayton, Ohio U.S.A.

Preface

Audience

This book is written for hardware installer/service personnel, system

integrators, and field engineers.

Notice: This document is NCR proprietary information and is not to

be disclosed or reproduced without consent.

Safety Warnings

Servicing

Caution: This product does not contain user serviceable parts.

Servicing should only be performed by a qualified service technician.

Fuse Replacement

Caution: For continued protection against risk of fire, replace only

with the same type and ratings of fuse.

Attention: Pour prévenir et vous protéger contre un risque de feu,

remplacer la fusible avec une autre fusible de même type, seulement.

Power Supply Cord Used as Disconnect Means

Caution: The power supply cord is used as the main disconnect

device. Ensure that the socket outlet is located/installed near the

equipment and is easily accessible.

Attention: Le cordon d'alimentation est utilisé comme interrupteur

général. La prise de courant doit être située ou installée å proximité du

matériel et être facile d'accés.

Lithium BatteryWarning

Caution: Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type as recommended by the

manufacturer. Discard used batteries according to the manufacturer's

instructions.

Attention: Il y a danger d'explosion s'il y a remplacement incorrect de

la batterie. Remplacer uniquement avec une batterie du même type ou

d'un type recommandé par le constructeur. Mettre au rébut les

batteries usagées conformément aux instructions du fabricant.

Battery Disposal (Switzerland)

Refer to Annex 4.10 of SR814.013 for battery disposal.

IT Power System

This product is suitable for connection to an IT power system with a

phase-to-phase voltage not exceeding 240 V.

Peripheral Usage

This terminal should only be used with peripheral devices that are

certified by the appropriate safety agency for the country of installation

(UL, CSA, TUV, VDE) or those which are recommended by NCR

Corporation.

Caution: DO NOT connect or disconnect a printer, keyboard, or any

other terminal-powered peripheral while the terminal is powered on.

Doing so may result in peripheral or system damage.

System Weight Considerations

Warning: The NCR 7401-1xxx and 7401-2xxx terminals must be

mounted securely to prevent a hazard. They must be installed in

accordance with local building codes. The post or wall on which the

unit is mounted should be able to withstand four times the weight of

the unit, which is approximately 20 lbs. (9 kg). The NCR 7401-4xxx is

a desk-top unit that has an assembled weight of approximately 90

lbs. (40.8 kg).

Environmental Consciousness

NCR is demonstrating its concern for the environment by designing an

intelligent power management system into this terminal that operates

efficiently whether the system is in a stand-alone or network

environment.

iii

Grounding Instructions

In the event of a malfunction or breakdown, grounding provides a

path of least resistance for electric current to reduce the risk of electric

shock. This product is equipped with an electric cord having an

equipment-grounding conductor and a grounding plug. The plug must

be plugged into a matching outlet that is properly installed and

grounded in accordance with all local codes and ordinances. Do not

modify the plug provided – if it will not fit the outlet, have the proper

outlet installed by a qualified electrician. Improper connection of the

equipment-grounding conductor can result in a risk of electric shock.

The conductor with insulation having an outer surface that is green

with or without yellow stripes is the equipment-grounding conductor.

If repair or replacement of the electric cord or plug is necessary, do not

connect the equipment-grounding conductor to a live terminal. Check

with a qualified electrician or service personnel if the grounding

instructions are not completely understood, or if in doubt as to whether

the product is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding plugs

and 3-pole receptacles that accept the product’s plug. Repair or replace

damaged or worn cords immediately.

References •NCR EasyPoint 7401 Hardware Service Guide (B005-0000-1341)

•NCR EasyPoint 7401 Site Preparation Guide (B005-0000-1255)

•NCR EasyPoint 7401 Interface Guide (B005-0000-01405)

•NCR EasyPoint 7401 ATX 38 Printer User’s Manual

(B005-0000-1454)

•NCR EasyPoint 7401/7454 Retail Terminal Parts Identification Manual

(B005-0000-1072)

•NCR FitClient Software User's Guide (B005-0000-1235)

•NCR EasyPoint 7401 Migration Guide (B005-0000-1500)

•NCR Retail Platform Software Terminal Utilities Guide

(B005-0000-1503)

Table of Contents

Chapter 1: 7401-2xxx and 3xxx Product Overview

Introduction..................................................................1-1

Serial Number/Model Number Label........................1-2

Fixed-Angle Mount Label......................................1-2

Tilt-Mount Label ....................................................1-3

Hardware Modules ......................................................1-4

Base Unit.................................................................1-4

Hardware Options .................................................1-5

Terminal Components not Supported..............1-7

System Configuration Diagram...................................1-8

Kit Configuration Diagram..........................................1-9

Hardware Module Descriptions................................ 1-10

Processor Board.................................................... 1-10

Processor/Chip Set.......................................... 1-10

Video Subsystem.............................................. 1-11

Ethernet 10/100Base-T LAN

Communications.............................................. 1-12

Wireless LAN Communications..................... 1-13

Universal Serial Bus......................................... 1-14

Serial Ports........................................................ 1-14

Hardware Monitor........................................... 1-15

PCI Expansion Header .................................... 1-15

IDE Header....................................................... 1-15

Audio ................................................................ 1-16

Magnetic Stripe Reader ................................... 1-16

Touch Screen Controller.................................. 1-16

Processor Board Connectors ........................... 1-17

NCR Retail Specific Hardware........................ 1-18

Board BIOS ....................................................... 1-22

Operator Display.................................................. 1-26

LCD Adapter Board......................................... 1-26

LCD Backlight Inverter Module ..................... 1-26

Touch Screen .................................................... 1-27

Features....................................................................... 1-28

Magnetic Stripe Reader........................................ 1-28

Printer Options..................................................... 1-29

7401-K590 Self-Service Printer ........................ 1-29

7401-K580 Self-Service Printer

(Discontinued).................................................. 1-30

7158 Printer....................................................... 1-31

7167 Printer....................................................... 1-31

7194 Printer....................................................... 1-32

7197 Printer....................................................... 1-32

Other Integrated Devices and Indicators ........... 1-33

Hard Disk Drive............................................... 1-33

Reset Switch...................................................... 1-33

Internal Speaker............................................... 1-33

POS Connector Board...................................... 1-34

Motion Sensor .................................................. 1-34

Power/Status LED........................................... 1-35

Power OK LED................................................. 1-35

LAN Status LEDs............................................. 1-35

Power Supply................................................... 1-36

Uninterruptible Power System (Optional)..... 1-36

Integrated Scanner Module (Optional)........... 1-36

Integrated Speaker Module (Optional) .......... 1-37

Compact Flash (Optional) ............................... 1-37

USB RS-232 Port Server ................................... 1-37

Integrated CD-ROM Drive (Tilt Mount

Model)............................................................... 1-38

Additional Connectors (Pentium III Board)....... 1-39

Compatibility.............................................................. 1-40

LAN Communications......................................... 1-40

Application Programmability ............................. 1-40

Operating System Information............................ 1-40

Migration..................................................................... 1-41

Retail Applications............................................... 1-41

Retail Peripherals ................................................. 1-41

Retail Systems....................................................... 1-42

Platform ............................................................ 1-42

Networks .......................................................... 1-42

Platform Load................................................... 1-42

Chapter 2: 7401-4xxx Product Overview

Introduction..................................................................2-1

Serial Number/Model Number Label........................2-2

Hardware Modules ......................................................2-3

Base Unit.................................................................2-3

Hardware Options .................................................2-4

Terminal Components not Supported..............2-5

System Configuration Diagram...................................2-6

Hardware Module Descriptions.................................. 2-7

Processor Board......................................................2-7

Processor/Chip Set............................................ 2-7

Video Subsystem................................................2-8

Ethernet 10/100Base-T LAN

Communications................................................ 2-8

Wireless LAN Communications.......................2-9

Universal Serial Bus......................................... 2-10

Serial Ports........................................................ 2-11

Hardware Monitor........................................... 2-12

PCI Expansion Header .................................... 2-12

vii

IDE Header....................................................... 2-12

Audio ................................................................ 2-12

Magnetic Stripe Reader ................................... 2-13

Touch Screen Controller.................................. 2-13

Processor Board Connectors ........................... 2-13

NCR Retail Specific Hardware........................ 2-14

Board BIOS ....................................................... 2-17

Operator Display.................................................. 2-21

LCD Adapter Board......................................... 2-21

LCD Backlight Inverter Module ..................... 2-21

Touch Screen .................................................... 2-22

Features....................................................................... 2-23

Secure Cabinet with Integrated Speakers........... 2-23

Ruggedized Keyboard with Trackball................ 2-23

Pin Pad.................................................................. 2-24

Motorized Card Reader....................................... 2-24

Magnetic Stripe Reader........................................ 2-25

Full Page Printer................................................... 2-25

Other Integrated Devices and Indicators ........... 2-26

Hard Disk Drive............................................... 2-26

Integrated CD-ROM ........................................ 2-26

Reset Switch...................................................... 2-26

Compact Flash.................................................. 2-27

Internal Speaker............................................... 2-27

POS Connector Board...................................... 2-27

USB Camera...................................................... 2-27

Motion Sensor .................................................. 2-28

Power/Status LED........................................... 2-28

Power OK LED................................................. 2-29

LAN Status LEDs............................................. 2-29

Power Supply................................................... 2-29

viii

Motorized Card Reader Power Supply.......... 2-30

Full Page Printer Power Supply...................... 2-30

Integrated Speakers ......................................... 2-30

EasyPoint 45 Pedestal...................................... 2-31

Chapter 3: 7401-2xxx and 3xxx Hardware Installation

Introduction..................................................................3-1

Installation Summary.............................................3-1

Installation Restrictions................................................3-2

Connecting the Cables..................................................3-3

Fixed-Angle Mount (F504).....................................3-3

Fixed-Angle Mount (F503).....................................3-5

Cable Routing.....................................................3-7

Cable Connector Identification .........................3-9

Tilt Mount............................................................. 3-10

Cable Routing................................................... 3-11

Cable Connector Identification ....................... 3-12

Installing Peripherals ................................................. 3-13

Installing a Transaction Printer........................... 3-13

RS-232 Installation ........................................... 3-13

USB Installation................................................ 3-14

7401-K590 Self-Service Printer ........................ 3-15

Installing a Cash Drawer..................................... 3-16

Installing a Second Cash Drawer.................... 3-17

Installing PC Cards .............................................. 3-18

Mounting a Fixed-Angle Mount Terminal............... 3-21

7401-K522 Pedestal Mount.................................. 3-22

7401-K521 Wall Mount ........................................ 3-23

7401-K521 Wall Mount with 7401-K530 Pole

Brackets................................................................. 3-25

Installing a K501 Tilt Mount Terminal...................... 3-32

7401-K533 Wall Mount ........................................ 3-33

Autres manuels pour EasyPoint 7401

Table des matières

Autres manuels NCR Terminal tactile

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur

Prestel

Prestel VCS-G2PRO Manuel utilisateur