Milwaukee MW700 Manuel utilisateur

USER MANUAL

PORTABLE

LUXMETER

MODEL: MW700

Smart Lux Meter

SPECIFICATIONS

Characteristics

Range 0.000 - 1999 Lux

2000 - 19999 Lux

20000- 50000 Lux

Range setting Manual through key buttons

Resolution

0.000 - 1999 Lux ±1 Lux

2000 - 19999Lux ±10 Lux

20000- 50000Lux ±100 Lux

Accuracy ±6% of reading ±1digits

Peak wave length 560 (nm)

Sensor type Silicon Photodiode (connected to meter)

Sensor sensitivity 100 scotopic LUX

Sensor stability ±2% change per year

(in first two years)

Power supply 1 x 9 V alkaline battery

Auto-off after about 5 minutes of non-use

Battery life approximately 150 hours

of continuous use

Environment 0 to 50ºC; RH95%

Dimensions 143 x 80 x 32 mm

Weight (meter with sensor) approximately 270 g

ISTMW700 01/10

Milwaukee Milwaukee

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

OPERATION:

• The meter is supplied complete with

a 9V battery. Remove the battery

compartment cover on the back of

the meter and install the battery

into the battery clip connector while

observing polarity.

• Put the light sensor on a stable

surface and the meter at a proper

distance to avoid any interference

or disturb to the sensor illumination.

• Turn the meter on by pressing the

ON/OFF key.

• Press one of the three "Range keys"

to select the proper scale according to

the intensity of the light.

• “1“ on the LCD indicates that it is

necessary to increase the measure

scale. Press the next range key. The

decimal point moves through the display

and finally the correct value is shown.

• Wait for about 1 second for the reading

to stabilize.

• After about 5 minutes of non-use, the

meter shuts off.

Note: Verify the sensor is clean before taking any measurement.

BATTERY REPLACEMENT:

When the battery becomes weak the

meter will display a blinking " " low

battery indicator.

When it appears, the battery has only

about 50 hours of working time left. A

low battery will result in unreliable

measurements. Prompt battery

replacement is required.

Battery replacement must only take

place in a non-hazardous area using

an alkaline 9V battery.

Turn the meter off, slide the battery

compartment cover located at the rear

of the meter off and replace the 9V

battery with a new one.

Make sure the battery contacts are

fully engaged in the connector, seat

the battery in its compartment and

replace the cover.

WARRANTY:

This instrument is warranted from all defects in materials and manufacturing for

a period of two years from the date of purchase.

If during this period, the repair or replacement of parts is required, where the

damage is not due to negligence or erroneous operation by the user, please return

the parts to either dealer or our office and the repair will be effected free of

charge.

Note: We reserve the right to modify the design, construction and appearance

of our products without advance notice.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Autres manuels Milwaukee Instrument de mesure

Milwaukee

Milwaukee MW500 Manuel utilisateur

Milwaukee

Milwaukee MW150 Manuel utilisateur

Milwaukee

Milwaukee REDLITHIUM Manuel utilisateur

Milwaukee

Milwaukee M12 ICAV3 Manuel utilisateur

Milwaukee

Milwaukee Mi 150 Manuel utilisateur

Milwaukee

Milwaukee LDM 45 Manuel utilisateur

Milwaukee

Milwaukee MW12 Manuel utilisateur

Milwaukee

Milwaukee MW13 Manuel utilisateur

Milwaukee

Milwaukee MC310 Manuel utilisateur

Milwaukee

Milwaukee MI 411 Manuel utilisateur

Milwaukee

Milwaukee MAX MW160 Manuel utilisateur

Milwaukee

Milwaukee MW806 MAX Manuel utilisateur

Milwaukee

Milwaukee MW100 Manuel utilisateur

Milwaukee

Milwaukee SM100 Manuel utilisateur

Milwaukee

Milwaukee MW180 MAX Manuel utilisateur

Milwaukee

Milwaukee MA871 Manuel utilisateur

Milwaukee

Milwaukee MC730 Manuel utilisateur

Milwaukee

Milwaukee ORP 57 Manuel utilisateur

Milwaukee

Milwaukee MW101 Manuel utilisateur

Milwaukee

Milwaukee MW700 PRO Manuel utilisateur

Milwaukee

Milwaukee pH51 Manuel utilisateur

Milwaukee

Milwaukee 2235-20 Manuel utilisateur

Milwaukee

Milwaukee MC310 Manuel utilisateur

Milwaukee

Milwaukee MA887 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur