Milwaukee MC310 Manuel utilisateur

USER MANUAL

MC310, MC410, MC410A

PRO Digital EC Monitors

milwaukeeinstruments.com (USA & CAN)

milwaukeeinst.com

ALARM

active when the measure

is bellow/above than the

setpoint, in according with

the BELLOW/ABOVE switch

TEMP.

COMPENSATION Automatic, from 0 to 50°C

ENVIRONMENT 0 to 50°C, 95% RH max.

PROBE MA812/2 (included)*

POWER

SUPPLY 12 VDC adapter (included)

DIMENSIONS 148.5 x 82.5 x 32 mm

WEIGHT 180 g (meter only)

(*) To be replace by technical personnel only

CERTIFICATION

Milwaukee Instruments conform to

the CE European Directives.

Disposal of Electrical & Electronic

Equipment. Do not treat this product

as household waste. Hand it over to

the appropriate collection point for the

recycling of electrical and electronic

equipment.

Please note: proper product prevents potential

negative consequences for human health and the

environment. For detailed information, contact

your local household waste disposal service or

go to www.milwaukeeinstruments.com (USA

& CAN) or www.milwaukeeinst.com.

RoHS

COMPLIANT

RECOMMENDATION

Before using this product, make sure it is entirely

suitable for your specific application and for the

environment in which it is used. Any modification

introduced by the user to the supplied equipment

may compromise the meter’s performance.

For your and the meter’s safety do not use or

store the meter in hazardous environment.

To avoid damage or burn, do not perform any

measurement in microwave ovens.

WARRANTY

These instruments are warranted against

defects in materials and manufacturing for a

period of 2 years from the date of purchase.

Probe is warranted for 6months. This warranty

is limited to repair or free of charge replacement

if the instrument cannot be repaired. Damage

due to accidents, misuse, tampering or lack

of prescribed maintenance is not covered by

warranty. If service is required, contact your local

Milwaukee Instruments Technical Service. If the

repair is not covered by the warranty, you will be

notified of the charges incurred. When shipping

any meter, make sure it is properly packaged for

complete protection.

ISTMC310_07_20-1

SATISFACTION

GUARANTEED

OPERATION

yConnect the supplied 12 VDC power adapter to

the meter and to the mains.

yMake sure the meter has been calibrated before

taking any measurements (see Calibration

Procedure).

yImmerse the tip (4cm) of the Conductivity

probe into the sample.

yTurn the instrument on by pressing the ON/OFF

key.

yWait for thermal equilibrium to be reached and

the meter will start continuous monitoring.

ySet the BELLOW / ABOVE alarm activation

switch in the desired position.

yA blinking alarm will indicate when the

measured EC or TDS value is lower/higher

than the setpoint (in accordance the BELLOW

/ ABOVE switch).

SETPOINT

yThe setpoint can be selected by adjusting the

central front knob to the desired value.

yThe selectable range for MC310 is from 1.0 to

5.0 mS/cm.

The selectable range for MC410 and for

MC410A is from 700 to 1900 ppm.

CALIBRATION PROCEDURE

yClean the probe with alcohol and let it dry (if a

more thorough cleaning is required, brush the

metal pins with fine sandpaper and then rinse

with water).

yOpen a sachet of suitable conductivity

calibration solution and immerse the probe,

making sure that metal pins are completely

submerged.

Use M10031 (1413 µS/cm) for MC310, M10442

(1500 ppm) for MC410 and M10032 (1382 ppm)

for MC410A.

yTurn the meter on by pressing the ON/OFF key.

yWait until the reading stabilize for temperature

variations, and then adjust the EC/TDS

calibration trimmer on the front panel with the

supplied screwdriver until the display shows:

“1413” µS/cm for MC310, “1500” ppm for MC410

and “1380” ppm for MC410A.

The calibration is now complete and the meter is

ready for use.

The instrument should be re-calibrated at least

once a month, or when the probe is changed.

OPTIONAL ACCESSORIES

M10031B 1413 µS/cm cal. solution, 20 mL

sachet (25 pcs)

M10039B 5.00 mS/cm cal. solution, 20 mL

sachet (25 pcs)

M10442B 1500 ppm cal. solution, 20 mL

sachet (25 pcs)

M10032B 1382 ppm cal. solution, 20 mL

sachet (25 pcs)

MA812/2 Conductivity probe with 2 m cable

SPECIFICATIONS

RANGE

MC310 0.0 to 10.0 mS/cm

MC410 0 to 1990 ppm

RESOLUTION

MC310 0 to 1990 mg/L (ppm) / 1

mg/L

MC410,

MC410A 10 ppm

ACCURACY

(@25°C) ±2% Full Scale

SETPOINT

MC310 1.0 to 5.0 mS/cm

MC410,

MC410A 100 to 1900 ppm

Ce manuel convient aux modèles suivants

Autres manuels Milwaukee Instrument de mesure

Milwaukee

Milwaukee MI 404 Manuel utilisateur

Milwaukee

Milwaukee Mi 190 Manuel utilisateur

Milwaukee

Milwaukee SM700 Manuel utilisateur

Milwaukee

Milwaukee L4 CLLP Manuel utilisateur

Milwaukee

Milwaukee 2235-40 Manuel utilisateur

Milwaukee

Milwaukee MI806 Manuel utilisateur

Milwaukee

Milwaukee M12 CPL Manuel utilisateur

Milwaukee

Milwaukee PH55 Manuel utilisateur

Milwaukee

Milwaukee 2236-20 Manuel utilisateur

Milwaukee

Milwaukee HEAVY DUTY M12 PL Manuel utilisateur

Milwaukee

Milwaukee 3631-20 Manuel utilisateur

Milwaukee

Milwaukee pH51 Manuel utilisateur

Milwaukee

Milwaukee Smart Monitoring System SMS110 Manuel utilisateur

Milwaukee

Milwaukee MW102 Manuel utilisateur

Milwaukee

Milwaukee MW10 Manuel utilisateur

Milwaukee

Milwaukee M12 3PL Manuel utilisateur

Milwaukee

Milwaukee MI 411 Manuel utilisateur

Milwaukee

Milwaukee MW101 Manuel utilisateur

Milwaukee

Milwaukee REDLITHIUM 3521-20 Manuel utilisateur

Milwaukee

Milwaukee M12 SUB-SCANNER 2291-20 Manuel utilisateur

Milwaukee

Milwaukee REDLITHIUM L4 3PL Manuel utilisateur

Milwaukee

Milwaukee MI404 Manuel utilisateur

Milwaukee

Milwaukee 2205-20 Manuel utilisateur

Milwaukee

Milwaukee MW12 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur