LINSHANG LS201 Manuel utilisateur
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 1 of 8
LS201
Digital Glass Thickness Meter
User Manual V2.0
Please read this manual carefully before using and reserve it for reference.
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 2 of 8
I. Product introduction
This instrument use optical reflection principle to measure the glass thickness.Just putting the meter on
the surface of the glass, it can test thickness of triple glazing, double glazing, laminated glass and other
kinds of glass.
II. Parameter
1. Dimension: 130mm * 72mm * 33mm (L * W * H)
2. Measuring range: 70mm of glass thickness, 45mm of air space
3. Measuring accuracy: ±0.1mm
4. Weight: 330g
5. Power Supply: 4 AA alkaline dry batteries
6. Display: LCD 240*160 Pixels
7. Minimum measurement size: 5mm*50mm
III. Button Operations
1. Powering on/off
In the shutdown state, short press “Power/ ” to power on.
If Power on, long press ”Power/ ” to power off.
If power on, the instrument will automatically power off if there is no operation within 10 minutes.
2. Language settings
In the shutdown state, long press ”Power/ ” to enter into the language setting mode.
3. Measuring mode settings
In the measuring results interface, short press “Select/▼” to enter into the measurement setting mode.
Select the measuring modes between “Auto” or “Manual”.
4. Select/▼
In the measuring setting interface, short press “Select/▼” to roll down selection or reduce 1 from the
number.
In the measuring result interface, if the measuring mode is “Auto”, there may be several kinds of
measuring results, short press “Select/▼” to view different results.
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 3 of 8
5. Measure/▲
In the measuring result interface, short press “Measure/▲” to get a new measurement.
In the measuring setting interface, short press “Measure/▲” to roll up selection or increase 1 from the
number.
IV. Instrument Setting
The meter need to set the “Language mode” and the “Measurement mode”.
1. Language mode setting
In the shutdown state, long press “Power/ ” to enter into the language setting mode, as shown in the
following figure, short press “Select/▼” or “Measure/▲” to shift between “Chinese” or “English”, short
press “Power/ ” to save and exit.
2. Measurement mode
The measurement mode has two selection “Auto” and ”Manual”.
In the measuring result interface, long press “Select/▼” to enter into the measurement mode setting
interface, short press “Measure/▲” or “Select/▼” to shift between “Auto” and ”Manual”, short press
“Power/ ” to confirm.
Auto mode
In automatic measurement mode, it will display “Auto” in the lower left corner of LCD, there maybe have
several kinds of measuring results, short press “Select/▼” to view different results until find the
corresponding result to fit the testing sample. If the given results are all incorrect, long press “Select/▼” to
shift to the Manual mode and make a new measurement.
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 4 of 8
Manual mode
A. If select manual mode, short press “Power/ ” will confirm and enter into the material type setting
interface, the default setting of first layer is glass, from the second layer, there are three options:
glass, air and none. Short press “Power/ ” to switch to set next layer. No need to set the laminate
inner-layer because the meter can’t measure the thickness of laminate inner-layer of laminated glass.
The thickness of laminate inner-layer will be included in the thickness value of adjacent glass.
B. After setting the material type, if the next layer is “none”, short press “Power/ ” will enter into the
thickness setting interface. Preset the estimated thickness value for current layer, short press
“Measure/▲” to increase the number by 1, short press “Select/▼” to reduce the number by 1. Short
press “Power/ ” to switch to next layer.
C. After setting the thickness, short press “Power/ ” will enter into save setting interface. Short press
“Measure/▲” and “Select/▼” to select save, reset or exit, then short press “Power/ ” to confirm.
Preset the type Preset the thickness Save setting interface
”Auto” mode is suitable for the measurement of most kinds of glass. Normally, the Meter will show several
different measurement result, the first one is the most likely result.
The first result The second result The third result
For some special glass, in “AUTO” mode can not get the correct result, "Manual" mode can be used. In
the "Manual” mode, preset the estimated glass thickness and air layer thickness. There is only one
measurement result to get in “Manual” mode.
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 5 of 8
Triple glazing Double glazing
Laminated glass with one layer air Laminated glass
V. Measuring Operations
Attach the back of the instrument closely to the tested glass surface, short press “Measure/▲”to enter
into the measuring state, Maybe there are several kinds of results, short press “Select/▼” to view different
results.
In “Auto” mode, the measuring result of Triple glazing as shown below:
“Glass1”is the thickness of the first layer of glass, the measured value is 5.88mm;
”Air1”is the thickness of the first layer of air space, the measured value is 12.75mm;
”Glass2”is the thickness of the second layer of glass, the measured value is 5.91mm;
”Air2”is the thickness of the second layer of air space, the measured value is 12.64mm;
”Glass3”is the thickness of the third layer of glass, the measured value is 5.9mm.
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 6 of 8
In the “Manual” mode, the measuring result of laminated glass as shown below:
“G1“means the first layer of glass, “G2“means the second layer of glass, and “G1+G2“means the
total thickness value of two layers of glass, the measured value is 8.31mm. This
result(G1+G2)means it’s unable to identify the position of the laminate inner-layer.
If the meter display the following image, that means it’s unable to identify glass, The possible causes
are listed below:
a) The back of instrument doesn’t attach closely to the tested glass surface;
b) The reflectivity of LOW-E layer is too high(More than 70%), please try to measure another
surface of glass;
c) The sunlight is too strong, try to prevent the back of the meter from directly facing the sunlight;
d) The surface of glass is too dirty or it is scratched.
VI. Precautions
1. Keep the glass surface clean.
2. Try to avoid overlapping of several glass when measuring, which may lead to wrong measuring
results.
3. Keep the detector on the back of the instrument clean.
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 7 of 8
4. In order to improve the measurement accuracy, try to prevent the back of the meter from directly
facing the sunlight.
5. This product emits a laser beam from the back side. Do not point the laser at anyone’s eyes.
6. Avoid contact with corrosive substances and keep from high temperature and high humidity
environment.
7. While the battery symbol is displayed as empty and flashing, please replace the batteries.
VII. Features
1. Laser reflects on CCD to measure glass thickness and air thickness from one side.
2. Quick measurement, the accuracy is up to 0.1mm.
3. It can test thickness of triple glazing, double glazing, laminated glass and other kinds of glass.
VIII. Standard Packing List
No.
Description
Quantity
Unit
1
Digital Glass Thickness Meter
1
pcs
2
User Manual
1
pcs
3
Certificate / warranty card
1
pcs
4
Plastic case
1
pcs
5
AAA batteries
4
pcs
IX. Service
1. The meter has one-year warranty. If the meter works abnormally, please send the whole meter to the
company for maintenance.
2. Provide users with spare parts and lifelong maintenance services.
3. Provide the users with the meter inspection service for free.
4. Free technical support for long term.
Manufacturer: Shenzhen Linshang Technology Co.,Ltd.
Website: www.linshangtech.com
Shenzhen Linshang Technology Co., Ltd
7-29-2020 Page 8 of 8
Service hotline: 086-755-86263411
Table des matières
Autres manuels LINSHANG Instrument de mesure
LINSHANG
LINSHANG LS301 Manuel utilisateur
LINSHANG
LINSHANG LS126A Manuel utilisateur
LINSHANG
LINSHANG LS101 Manuel utilisateur
LINSHANG
LINSHANG LS252DL Manuel utilisateur
LINSHANG
LINSHANG LS230 Manuel utilisateur
LINSHANG
LINSHANG LS120 Manuel utilisateur
LINSHANG
LINSHANG LS232 Manuel utilisateur
LINSHANG
LINSHANG LS136 Manuel utilisateur
LINSHANG
LINSHANG LS233 Manuel utilisateur
LINSHANG
LINSHANG LS191 Manuel utilisateur
LINSHANG
LINSHANG LS236 Manuel utilisateur
LINSHANG
LINSHANG LS126C Manuel utilisateur
LINSHANG
LINSHANG LS300 Manuel utilisateur
LINSHANG
LINSHANG LS212 Manuel utilisateur
LINSHANG
LINSHANG LS200 Manuel utilisateur
LINSHANG
LINSHANG LS137 Manuel utilisateur
LINSHANG
LINSHANG LS190 Manuel utilisateur
LINSHANG
LINSHANG LS182 Manuel utilisateur
LINSHANG
LINSHANG LS110 Manuel utilisateur
LINSHANG
LINSHANG LS195 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur