LINSHANG LS236 Manuel utilisateur

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 1 of 8

LS236

Coating Thickness Gauge

User Manual V2.0

Please read this manual carefully before using and reserve it for reference.

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 2 of 8

I. Product Introduction

The coating thickness gauge is professionally used for measuring the thickness of car paint. The car

body shell material is generally metal materials such as iron, aluminum and non-metallic materials such

as carbon fiber, plastic, etc. The coating thickness gauge can measure the car paint thickness on iron

and aluminum substrates. . Moreover, it can identify not only non-metal

car bodies, but also the ferrous putty layer as well as the galvanized iron.

The gauge has two displays on the front and the top separately. The two

displays simultaneously display the test data. When measuring different

positions of the car body, it is convenient to view the test data. Among

them, the front display uses LCD, LCD ensures that the test results are

clearly visible under strong light. The top display uses OLED, OLED

ensures normal display in a low temperature environment of -40°C. It

also features 3-color backlight display. When the device identifies the

ferrous putty, the backlight turns red. In case of the galvanized iron

substrate, the backlight turns green. And under other situations, the

backlight is white.

Standards for the product:

 DIN EN ISO 2808 Paints and Varnishes-Determination of Film Thickness

 JJG-818-2005 Verification Regulation of Magnetic and Eddy Current Measuring Instrument for

Coating Thickness

 GB/T 4956-2003 Non-magnetic Coatings on Magnetic Substrates-Measurement of Coating

Thickness-Magnetic Method

 GB/T 4957-2003 Non-conductive Coatings on Non-magnetic Basis Metals-Measurement of

Coating Thickness-Eddy Current

II. Parameters

Probe tip Ruby

Measuring principle Fe: Hall Effect / NFe: Eddy current

Probe type Built-in integrated probe

Measuring range 0.0-2000μm

Resolution

0.1μm:(0μm - 99.9μm)

1μm:(100μm - 999μm)

0.01mm:(1.00mm - 2.00mm)

Accuracy ≤±(3% reading+2μm)

Unit μm / mil

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 3 of 8

Measuring interval 0.5s

Minimum measuring area Ø = 25mm

Minimum curvature Convex:5mm / Concave:25mm

Minimum substrate thickness Fe:0.2mm / NFe:0.05mm

Display Front: 128×48 dot matrix LCD, top: 128×64 dot matrix OLED

Power supply 2 pcs of 1.5V AAA alkaline battery

Operation temperature range -40℃-50℃

Storage temperature range -50℃-60℃

Gauge size 100*60*24 mm

Weight(with battery) 80g

III. Features

1. No calibration, just zero adjustment.

2. Simple operation by pressing one button.

3. Fast measurement, 0.5s measuring interval.

4. Dual display design, display the measured value simultaneously. It is convenient to view the test data

in real time when measuring at different angles.

5. Using LCD and OLED as display devices simultaneously, LCD ensures that the test results are clearly

visible under strong light and OLED ensures normal display in a low temperature environment of -

40°C.

6. The device can identify the ferrous putty as well as the galvanized iron substrate. It also features 3-

color backlight display.

7. Wear-proof ruby probe tip for long-term use.

8. Dual-use probe for both iron and aluminum. The gauge can automatically identify the substrate and

switch measurement mode rapidly.

9. "Fe", "NFe", "Fe/NFe" three measurement modes can be set.

10. The gauge can measure the non-magnetic coating thickness on metal substrates and non-conductive

coating thickness on non-magnetic substrates.

11. Use advanced digital probe technology, these sensors are unsusceptible to interference and provide

an excellent measuring accuracy. Even temperature change will not affect measurement and data

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 4 of 8

remain stable to ensure a very good reproducibility over the complete measuring range.

IV. Operation

1. Power on/off

Power on:

Short press the power button to turn on the gauge. Display the version number and serial number, then

the recorded data of last measurement are displayed after the gauge is turned on.

Power off:

Long press the button to shut down the gauge, or the gauge will automatically shut down in 3 minutes

without any operation.

2. Device setting

In the off state, long press the button for 3s to enter the setting interface.After entering the setting interface,

if there is no operation for more than 20 s, the gauge will automatically shut down.Short press the button

can select the settings; Long press the button for 3 s and less than 5 s to confirm the settings; long press

the button for 5 s, the gauge exits the setting and shuts down and the setting is invalid.

Language settings

The instrument is available in Chinese, English, Russian, Turkish.

Setting method: In the main setting interface, short press power button to select "Language" option, long

press the button for 3 seconds to confirm the selection, short press the button again to select the desired

language, long press the button for 3 seconds to confirm the selection, and return to the main setting

interface.

Setting interface Language selection

Measurement modes selection

There are three measurement modes: Ferrous substrate measurement (Fe), Aluminum substrate

measurement (Al), and Auto identification (Fe/Al). Under normal circumstances, it is enough to use Fe/Al

auto identification mode. This mode features identification of the ferrous putty and galvanized iron

substrate. When the measurement substrate is settled, you can select Fe or Al as the fixed

measurement mode.

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 5 of 8

Setting method: In the main setting interface, select "mode" option by short pressing power button, and

long press the button for 3 seconds to confirm the selection. Shortly press the button to select the

measurement mode. And long press the button for 3s to confirm the selection and back to the main

setting interface.

Unit setting

The device can be set to the metric or imperial unit, and the factory default is metric.

Setting method: In the main setting interface, shortly press the button to select “Unit”. Long press the

button for 3s to confirm and then enter the unit selection interface. Shortly press the button to select your

unit and long press the button for 3s to confirm and back to the main setting interface.

Main setting interface Unit selection interface

Exit

In the main setting interface, short press power button to select "Exit", long press the button for 3

seconds to confirm and enter the measurement interface

3. Zero adjustment

A zero-adjustment is required when using the gauge for the first time, after inserting new batteries, working

with different materials or ambient temperature changes. We strictly recommend carrying out the reference

check on the uncoated original substrate, due to the difference of magnetic and conductive properties of

the material, some measurement deviation will be caused. If this is not possible, please use the zero

reference plates supplied by Linshang technology, there are Fe plate and NFe plate, please choose

correctly according to the measuring materials.

3.1 Measuring the plate or uncoated original substrate, a measured value will be displayed on the gauge,

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 6 of 8

please make sure the probe tip is placed perpendicularly and evenly on the surface.

3.2 Hold the probe still, long press the button for 3s, the gauge will display “zero reference place probe”

(as shown in below picture).

3.3 After hearing a buzzer sound, the gauge will display “Lift off probe at least 15 cm” (as shown in below

picture), release the button and lift the probe away from the plate (substrate) for at least 15 cm.

3.4 The zero adjustment completed when there is the buzzer sound again, and the LCD screen displays

0.0.

3.5 After the zero adjustment is completed, place the standard film on the plate (substrate), if the

measurement value is stable and deviation from standard value within ±3μm, the gauge can be used

normally.

Note: After the zero adjustment completed，when repeating measurement on the same spot, the

reading may not always be 0μm, since surface roughness, dirt, scratches etc. It might cause

variances. The operation of the gauge should be correct and proficient; otherwise, it will lead to

instability of the measured values.

4. Measurement

1) Hold the non-slip groove with your fingers.

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 7 of 8

2) Press the probe against the tested object surface vertically. Keep the probe stable, do not tilt or shake.

Measurement value will appear on the display with buzzer alerts.

3) To continue the measurement, you can lift off the probe away from the object to be measured, and

then follow step 2) again.

4) When the device identifies the ferrous putty, it will turn on the red backlight. The buzzer alerts for two

times. And the interface of the device will prompt: “Ferrous putty”. When the device identifies the

galvanized iron, it will turn on the green backlight. The substrate is displayed as “FeZn”.

5. Check measurement records

In measurement mode, short press the button to check historical data. The gauge stores 9 sets of data.

When more than 9 sets of data are stored, the earliest recorded value is automatically deleted, and “No.1”

is the last test data. Recorded data will not loss after powering off.

V. Precaution

1. The device must be zero adjusted respectively with the iron-base and aluminum-base zero adjustment

plates. Otherwise, there may be abnormal identifications of the ferrous putty and galvanized iron substrate.

2. It is strictly forbidden to slide the probe on the surface of the car body; otherwise both the car paint and

device will be damaged.

3. Please ensure that the paint surface of the car body is clean. Dust, dirt and other foreign objects on the

surface will affect the measurement accuracy.

4. When the device displays “Low Battery”, batteries should be replaced.

VI. Packing list

No. Description Quantity Unit

1 Coating Thickness Gauge 1 Set

2 Fe zero-adjustment plate 1 pcs

3 NFe zero-adjustment plate 1 pcs

4 Standard film 1 pcs

5 User manual 1 pcs

6 Drawstring bag 1 pcs

7 Certificate / Warranty card 1 pcs

Shenzhen Linshang Technology Co., Ltd.

3/12/2022 Page 8 of 8

8 1.5V AAA alkaline battery 2 pcs

VII. Service

1. The gauge has one-year warranty. If the gauge works abnormally, please send the whole gauge to

our company for maintenance.

2. Provide users with spare parts and lifelong maintenance services.

3. Provide the users with the gauge calibration service.

4. Free technical support for long term.

Manufacturer: Shenzhen Linshang Technology Co., Ltd.

Website: www.linshangtech.com

Service hotline: +86-755-86263411

Email: sales21@linshangtech.com

Table des matières

Autres manuels LINSHANG Instrument de mesure

LINSHANG

LINSHANG LS130 Manuel utilisateur

LINSHANG

LINSHANG LS108A Manuel utilisateur

LINSHANG

LINSHANG LS195 Manuel utilisateur

LINSHANG

LINSHANG LS201 Manuel utilisateur

LINSHANG

LINSHANG LS251D Manuel utilisateur

LINSHANG

LINSHANG LS300 Manuel utilisateur

LINSHANG

LINSHANG LS120 Manuel utilisateur

LINSHANG

LINSHANG LS213 Manuel utilisateur

LINSHANG

LINSHANG LS123 Manuel utilisateur

LINSHANG

LINSHANG LS108H Manuel utilisateur

LINSHANG

LINSHANG LS131 Manuel utilisateur

LINSHANG

LINSHANG LS132 Manuel utilisateur

LINSHANG

LINSHANG LS200 Manuel utilisateur

LINSHANG

LINSHANG LS171 Manuel utilisateur

LINSHANG

LINSHANG LS137 Manuel utilisateur

LINSHANG

LINSHANG LS196 Manuel utilisateur

LINSHANG

LINSHANG LS190 Manuel utilisateur

LINSHANG

LINSHANG LS193 Manuel utilisateur

LINSHANG

LINSHANG LS136 Manuel utilisateur

LINSHANG

LINSHANG LS162A Manuel utilisateur

LINSHANG

LINSHANG LS220B Manuel utilisateur

LINSHANG

LINSHANG LS197 Manuel utilisateur

LINSHANG

LINSHANG LS126C Manuel utilisateur

LINSHANG

LINSHANG LS110 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur