Leica K3C Manuel utilisateur

Leica Microscope Camera

K3C, K3M, K5C, K8

User Manual

User Manual K3C, K3M, K5C, K8 2

Contents

General Notes

General Notes 4

Important Safety Notes 5

Symbols Used 6

Safety Instructions 7

Introduction

Standard Delivery and Optional Accessories 13

Overview K3C, K3M, K5C 14

Overview K8 15

Assembly

Assembling the Camera 17

PC Operation - Installation / Setup / Application

Connecting a Computer, Installing LASX Software 19

Using the Camera in LAS-X 20

Triggering the Camera 21

Filter Replacement 22

Gain (K8 Camera Only) 23

Triggering (K8 Camera Only) 24

Camera Fan Control (K8 Camera Only) 25

Care and Maintenance

Care, Maintenance, Contact Persons 27

User Manual K3C, K3M, K5C, K8 General Notes 3

General Notes

User Manual K3C, K3M, K5C, K8 General Notes 4

General Notes

Cleaning

ODo not use any unsuitable cleaning agents,

chemicals or techniques for cleaning.

ONever use chemicals to clean colored

surfaces or accessories with rubberized

parts. This could damage the surfaces, and

specimens could be contaminated by abra-

ded particles.

OFollow the notes regarding cleaning the

ﬁlter glass.

OIn most cases it is OK to use a wipe

dampened with 70 % ethanol in distilled

water.

Servicing

ORepairs may only be carried out by Leica

Microsystems-trained service engineers.

Only original Leica Microsystems spare

parts may be used.

Responsibilities of person in charge of

camera

OEnsure that the Leica microscope camera

is operated, maintained and repaired by

authorized and trained personnel only.

User Manual K3C, K3M, K5C, K8 General Notes 5

Important Safety Notes

User manual

The Leica microscope camera can be conﬁgu-

red in a variety of ways in the Leica product

range. User manuals and updates are available

for you to download and print from our web

site at www.leica-microsystems.com.

This user manual describes the special func-

tions of the Leica microscope camera and

contains important instructions for operating

safety, maintenance and the accessory parts.

You can combine individual system articles

with articles from external suppliers (e.g. light

sources, etc.). Please read the user manual and

the safety instructions from the supplier.

Before installing, operating or using the instru-

ments, read the user manuals listed above. In

particular, please follow all safety instructions.

To maintain the unit in its original condition

and to ensure safe operation, the user must

follow the instructions and warnings contained

in these user manuals.

User Manual K3C, K3M, K5C, K8 General Notes 6

Symbols Used

Read and understand this user

manual before using this camera.

Warning! Safety hazard!

This symbol indicates especially

important information that is

mandatory to read and observe.

Failure to comply can cause the

following:

OPersonal injury!

OInstrument malfunctions and damage.

Warning of hazardous electrical voltage

This symbol indicates especially

important information. Failure to

comply can cause the following:

OPersonal injury!

OInstrument malfunctions and damage.

Instrument malfunctions and damage

This symbol warns against touching

hot surfaces, such as light bulbs.

Important information

This symbol indicates additional

information or explanations that are

intended to provide clarity.

User Manual K3C, K3M, K5C, K8 General Notes 7

Safety Instructions

Intended use

This camera system is designed for use by engi-

neers and scientists. It is a scientiﬁc measuring

instrument, which provides images.

The camera may only be used according to the

instructions of this user manual. The disclosures

and operating conditions in this user manual

must be respected. Unauthorized modiﬁca-

tions and changes of the device are forbidden

for safety reasons.

Non-intended use

Never use the Leica microscope camera or its

components for diagnostic procedures if it is

not expressly intended for such use.

The instruments and accessories described in

this user manual have been tested for safety

and potential hazards.

The responsible Leica aﬃliate must be consul-

ted whenever the instrument is altered, modi-

ﬁed or used in conjunction with non-Leica

components that are outside of the scope of

this user manual!

Unauthorized alterations to the instrument or

noncompliant use shall void all rights to any

warranty claims.

Place of use

OElectrical components must be placed at

least 10 cm away from the wall and from

ﬂammable substances.

OAvoid large temperature ﬂuctuations, direct

sunlight and vibrations. These conditions

can distort the functionality of the camera.

OIn warm and damp climates, the individual

components require special care in order to

prevent the build-up of fungus.

Responsibilities of person in charge of

instrument

Ensure that:

OThe Leica microscope camera and accesso-

ries are operated, maintained and repaired

by authorized and trained personnel only.

OAll operators have read, understood and

observe this user manual, and particularly

the safety regulations.

User Manual K3C, K3M, K5C, K8 General Notes 8

Safety Instructions (Continued)

Transport

OUse the original packaging for shipping or

transporting the individual modules of the

Leica microscope camera and the acces-

sory components.

EU Declaration of Conformity

To download the EU Declaration of Conformity

use the link http://www.leica-microsystems.

com/products.

Health risks

Workplaces with microscopes facilitate and

improve the viewing task, but they also impose

high demands on the eyes and muscles of the

user. Depending on the duration of uninter-

rupted work, asthenopia and musculoskeletal

problems may occur. For this reason, approp-

riate measures for reduction of the workload

must be taken:

OOptimal arrangement of workplace, work

assignments and work ﬂow (changing tasks

frequently).

OThorough training of the personnel, giving

consideration to ergonomic and organizati-

onal aspects.

The ergonomic optical design and construction

of Leica microscopes are intended to reduce the

exertion of the user to a minimum.

The manufacturer assumes no liabi-

lity for damage caused by, or any

risks arising from using the device

for other purposes than those for

which they are intended or not

using them within the speciﬁcations

of Leica Microsystems CMS GmbH.

In the event of such, the declaration

of conformity shall become null and

void.

This device is not intended for use

in the patient environment deﬁned

by DIN VDE 0100-710. Neither is it

intended for combining with medi-

cal devices according to

93/42/EWG and/or IVD devices

according to 98/78/EG (2107/746).

If this device is electrically connec-

ted to a medical device according

to EN60601-1, the requirements

deﬁned in EN60601-1-1 shall apply.

User Manual K3C, K3M, K5C, K8 General Notes 9

Safety Instructions (Continued)

This user manual is an essential

component of the camera, and must

be read carefully before the camera

is assembled, put into operation

or used, and must be kept for later

references.

Instrument safety and EMC

Our device has been designed, produced and

tested in compliance with:

ORadio interference suppression in compli-

ance with EN 55011 class B (Class A for K8

only)

OEN 61326-1/IEC 61326-1, Electrical equip-

ment for measurement, control and labora-

tory use – EMC requirements

The device meets the requirements of EU

directives:

O2014/30/EU EMC directive

O2014/35/EU low voltage directive

O2011/65/EU RoHS directive

O2009/125/EC + VO EU 1194/2012 Ecodesign

requirements for energy-related products

O2009/125/EC + VO EU 2019/1782 Ecodesign

requirements for energy-related product

and carries the CE mark.

K8 camera only: This camera is constructed

and tested in accordance with EN 61010-1 /

IEC61010-1, Safety requirements for electrical

equipment for measurement, control and labo-

ratory use and EN61326-1/ IEC61326-1, Elec-

trical equipment for measurement, control and

laboratory user – EMC requirements.

The device must be disposed of in

accordance with 2012/19/EU WEEE

directive.

Intended for indoor use only in all EU member

states, EFTA states and Switzerland.

In order to maintain this condition

and to ensure safe operation, the

user must follow the instructions

and warnings contained in this user

manual.

Unauthorized alterations to the

camera or noncompliant use shall

void all rights to any warranty claims

and product liability!

User Manual K3C, K3M, K5C, K8 General Notes 10

Tolerable ambient conditions

OTemperature: +10 °C ... 40 °C

ORelative humidity: 10% ... 90 %,

non-condensing

Do not use the device in altitudes

exceeding 2000 m ASL/NL.

Transport and storage in a range of

-10° – +60 °C and at a humidity not

exceeding 70 % (non-condensing).

Make sure that a free air circulation

is provided.

The electrical components are not

protected against water. Water can

cause electric shock.

Do not use this camera near sources

of high electromagnetic radiation

(for example, unshielded, intentio-

nally operated ultra-high frequency

sources), because these can disrupt

proper operation.

We recommend assessing the elec-

tromagnetic environment before

operation of this camera and then

giving corresponding instructions.

This user manual is an essential

component of the product; it must

be read carefully before the camera

is assembled, put into operation

or used, and must be kept for later

reference.

Only insert or unplug data and

control circuits when the camera is

switched oﬀ; otherwise, the camera

may be damaged.

Illustrations, descriptions and tech-

nical data are not binding and may

be changed without notice.

You will ﬁnd the latest release of this

user manual and other information

on our web site at www.leica-micro-

systems.com.

Electrical components must be assembled at

least 10cm from the wall and away from ﬂam-

mable substances.

This device is not intended for use in the pati-

ent environment deﬁned by DINVDE0100-710.

Neither is it intended for combining with medi-

cal advices according to EN 60601-1. If this

device is electrically connected to a medical

device according to EN 60601-1, the require-

ments deﬁned in EN60601-1-1 shall apply.

Safety Instructions (Continued)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Leica Microscope

Leica

Leica DMIL Manuel utilisateur

Leica

Leica M165 FC Manuel utilisateur

Leica

Leica DM750 M Manuel utilisateur

Leica

Leica M844 Manuel utilisateur

Leica

Leica TCS SP8 MP Manuel utilisateur

Leica

Leica DM6000 M Manuel utilisateur

Leica

Leica BF200 Manuel utilisateur

Leica

Leica Stellaris 5 Manuel utilisateur

Leica

Leica M80 B Manuel utilisateur

Leica

Leica DM1000 LED Manuel utilisateur

Leica

Leica BF200 Manuel utilisateur

Leica

Leica DM E Manuel utilisateur

Leica

Leica S4 E StereoZoom Manuel utilisateur

Leica

Leica TCS SP8 Guide de l'utilisateur

Leica

Leica DVM6 Manuel utilisateur

Leica

Leica M205A Manuel

Leica

Leica M500 N Manuel utilisateur

Leica

Leica M60 B Manuel utilisateur

Leica

Leica PROVIDO Manuel utilisateur

Leica

Leica VOH IV Manuel utilisateur

Leica

Leica M Manuel utilisateur

Leica

Leica DIGILUX 1 Manuel utilisateur

Leica

Leica TCS SPE Manuel utilisateur

Leica

Leica S7 E Manuel utilisateur

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur

AO Cycloptic Manuel utilisateur

Celestron

Celestron 44345 Manuel utilisateur