Kogan KAMN21F7VA Manuel utilisateur
21.5” FULL HD FRAMELESS
MONITOR
1920 x 1080, 75Hz
KAMN21F7VA
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this
user guide for future reference.
•This monitor is designed with ventilation holes on the back of the casing. Do not cover
or block them.
•Avoid placing the monitor near heaters, stoves, fireplaces, or other heat sources.
•Do not place this monitor in rooms lacking adequate ventilation.
•Do not insert any objects or spray any liquids into the vents.
•Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and cause injury to people within its vicinity.
•Do not place heavy objects on the monitor, its power cord, or any connected cables.
•Do not open the back panel of the monitor as it contains a high-voltage current even
when not plugged in.
•Unplug the monitor if it will not be used for an extended period.
•Ensure the monitor is unplugged before cleaning.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing Administrator, Inc. in the United States, and other
countries.
SAFETY & WARNINGS
A Monitor (x1)
B Stand stem (x1)
C Stand base (x1)
DStand stem plate (x1)
E M4 8mm screw (x3)
F M5 12mm screw (x1)
G Power cord (x1)
H HDMI cable (x1)
I User guide (x1)
COMPONENTS
1 Menu/select button 5 Power button
2 Exit/input menu button 6 HDMI port
3 Up button 7 VGA port
4 Down button 8 Power port
OVERVIEW
1
2
3
4
5
6
7
8
1. With the display side facing down, lay the monitor (A) on a soft cloth to prevent
damage.
2. Clip the stand stem plate (D) into the
stand stem (B). Using a screwdriver (not
supplied), secure the M4 8mm screws (E)
through the holes on the stand stem
plate (D) to the stand stem (B).
3.Clip the stand stem (B) into the monitor
(A).
4.Align the stand base (C) with the stand
stem (B). Using a screwdriver, secure the
stand base (C) to the stand stem (B) with
the M5 12mm screw (F).
STAND ASSEMBLY
A
B
C
E
D
B
F
B
If mounting to a wall, ensure the stand base and stand stem are disconnected from the
monitor.
Consult a professional before mounting the monitor.
1. With the display side facing down, lay the monitor on a soft cloth to prevent damage.
2.Identify the four wall mounting screws on the back of the monitor.
3.Mount the monitor as desired with the steps provided with your VESA mount.
VESA MOUNT
Notes:
•Ensure there is at least a 10cm clearance away from all sides of the monitor.
•The mounting hole distance for this monitor is 75mm x 75mm.
•M4 8mm screws are required.
•VESA mount and mounting accessories are not included.
•Images are for reference only.
Before connecting, ensure the display is switched off.
Power cable
Plug one end of the power cable into the power port on the monitor. Plug the other end into
an outlet.
HDMI
In order for the monitor to receive HDMI signals to your computer, plug one end of the
included HDMI cable into the HDMI port on the monitor.
Plug the other end into the HDMI port on your computer.
CONNECTIVITY
Power cable
HDMI cable
HDMI OUTPUT
(PC)
VGA
In order for the monitor to receive VGA signals to your computer, plug one end of a VGA
cable (not included) into the VGA port on the monitor.
Plug the other end into the VGA port on your computer.
VGA cable (not included)
VGA OUTPUT
(PC)
1. Connect the monitor to your computer via HDMI/VGA.
2.Connect one end of the power cable into the power port of the monitor. Connect the
other end into an outlet, then turn the outlet on.
3.Press the power button to turn the monitor on.
On-Screen display (OSD) menu
The OSD menu allows adjustments to various settings for the monitor.
1. Press the menu/select button to access the OSD menu.
2.Press the up and down buttons to browse through the categories of settings. Press the
menu/select button to enter the sub-menu.
3.Press the up and down buttons to browse through the sub-menu. Press the
menu/select button to enter the adjustment settings of the desired setting.
4.Press the up and down buttons to adjust the desired setting. Press the menu/select
button to confirm the adjustment.
5.Press the exit/input menu button to exit the OSD menu.
OPERATION
Note:
It is recommended that a surge protector with adequate voltage is used if the
monitor cannot be directly connected to an outlet.
Table des matières
Autres manuels Kogan Moniteur
Kogan
Kogan KAMN24FXSA Manuel utilisateur
Kogan
Kogan KAMN44UWCLA Manuel utilisateur
Kogan
Kogan KAMN27PQFTA Manuel utilisateur
Kogan
Kogan KAMN40XQUCLA Manuel utilisateur
Kogan
Kogan KALED24144A Manuel utilisateur
Kogan
Kogan KAMN34RQUCSA Manuel utilisateur
Kogan
Kogan KAMN30FXULA Manuel utilisateur
Kogan
Kogan KAMN22FNSA Manuel utilisateur
Kogan
Kogan KAMN24FG6LA Manuel utilisateur
Kogan
Kogan KAMN34F1QULB Manuel utilisateur
Kogan
Kogan KAMN15TFULA Manuel utilisateur
Kogan
Kogan KAMN34RXUSA Manuel utilisateur
Kogan
Kogan KAMN27QFQA Manuel utilisateur
Kogan
Kogan KAMN27QFSA Manuel utilisateur
Kogan
Kogan KAMN24FXCLB Manuel utilisateur
Kogan
Kogan KAMN34RQUCJA Manuel utilisateur
Kogan
Kogan KALED24MONCA Manuel utilisateur
Kogan
Kogan KAMN32F7CSA Manuel utilisateur
Kogan
Kogan KAHUDA5CARA Manuel utilisateur
Kogan
Kogan KAMN24F7CSB Manuel utilisateur
