Kogan KAMN28UHFSB Manuel utilisateur

28” ULTRA HD 4K FREESYNC

MONITOR (3840 x 2160)

KAMN28UHFSB

• Read all instructions before using the appliance and retain this guide for reference.

• Unplug the monitor before cleaning it.

• Use a clean, slightly dampened cloth to wipe the main monitor body.

• To c l e a n t h e s c r e e n : t u r n i t o f f , u n p l u g i t a n d w a i t f o r i t t o c o o l c o m p l e t e l y, t h e n

wipe it with a dry microfibre cloth.

• Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.

• This monitor is designed with ventilation holes on the back of the casing. Do not

cover or block them.

• Do not insert any object or spray any liquid into the vents.

• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat,

as well as in rooms lacking adequate ventilation.

• Do not position the monitor in unsafe locations. If the monitor falls, it may be

damaged or may injure nearby people.

• Unplug the monitor if it is not going to be used for an extended period.

• Do not place heavy objects on the monitor, its power cord or any connected cable.

• Do not open the back panel of the monitor, as it contains a high-voltage current

even when not plugged in.

SAFETY & WARNINGS

LED monitor

Stand

Base

User guide

DisplayPort cable

Power cable

Adapter

COMPONENTS

Controls

A. Source

B. Up

C. Down

D. Right

E. Left

F. Menu/Enter

G. Power

Ports

OVERVIEW

DC IN

HDMI 1

HDMI 2

AUDIO OUT

Installing the stand

1. Clear a table and place a piece of soft cloth on it to prevent the LED monitor from

being scratched.

2. Lay the LED monitor flat on the table with the LED screen facing down.

3. Insert stand into the monitor, then secure the base by tightening the screw.

4. Stand the LED monitor up.

ASSEMBLY

VESA mount

Follow the steps below to install onto a monitor arm or wall mount (not included).

1. Place the mounting plate onto the back of the LED monitor, lining up the holes of

the plate with the holes in the back of the monitor.

2. Insert the 4 screws into the holes and tighten.

3. Assemble the mount as per the instructions provided with the mount.

4. Connect the power and display cables to the monitor.

Note:

The 100 x 100mm VESA pattern requires 4 x M4 screws and a pitch of 0.7mm.

Screw mounting kit is not included.

Setup

1. Connect a HDMI or DisplayPort cable from your monitor to the computer.

2. Connect the power adapter to a properly grounded AC outlet, then to the monitor.

The indicator LED will illuminate blue.

3. Power on the computer, then power on the monitor.

4. Set the display mode on your computer accordingly. The recommended resolution

and refresh rate are 3840 x 2160 @60Hz.

OPERATION

HDMI 1, HDMI 2

DP IN

AUDIO OUT

Adapter 12V@5A

Button operation

A. Source button

• Press the button to display all the signal channel menus.

• Press the button to exit the OSD menu.

B. Up button

C. Down button

D. Right button

E. Left button

• Press these buttons to move the cursor to the needed function.

• Press the corresponding button to change the selected function in the OSD menu.

F. Menu

• Press the button to display the OSD main menu.

• Press the button to confirm changes made to the settings.

G. Power

• Press the button to turn the display on or off.

OSD

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings and

appears on screen after turning on the monitor and pressing the “ ” button.

When using the monitor for the first time, the monitor will configure optimal settings

automatically.

1. Press “ ” to enter the OSD menu.

2. Press to browse functions.

With the desired function highlighted, press “ ” to enter the sub-menu.

Press to browse sub-menus, then press “ ” to highlight the desired

function.

Press to highlight an option, then press “ ” to confirm the settings and

exit the current screen.

3. Press “ ” to exit the current screen.

Table des matières

Autres manuels Kogan Moniteur

Kogan

Kogan KALED28UHDA Manuel utilisateur

Kogan

Kogan KAMN27RQ1LA Manuel utilisateur

Kogan

Kogan KALED27MONSC Manuel utilisateur

Kogan

Kogan KAMN24FXCLB Manuel utilisateur

Kogan

Kogan KAMN21F7VA Manuel utilisateur

Kogan

Kogan KAMN27QFSB Manuel utilisateur

Kogan

Kogan KAMN32QF7LA Manuel utilisateur

Kogan

Kogan KALED553D1A Manuel utilisateur

Kogan

Kogan KAMN24FG6QA Manuel utilisateur

Kogan

Kogan KAMN34F1QULB Manuel utilisateur

Kogan

Kogan KAMN15CSA Manuel utilisateur

Kogan

Kogan KAMN27UHFTA Manuel utilisateur

Kogan

Kogan KAMN24F7SA Manuel utilisateur

Kogan

Kogan KAMN32RQ1LA Manuel utilisateur

Kogan

Kogan KAMN26FUSA Manuel utilisateur

Kogan

Kogan KAMN34F1QULA Manuel utilisateur

Kogan

Kogan KAHUDA5CARA Manuel utilisateur

Kogan

Kogan KAMN24QUCMA Manuel utilisateur

Kogan

Kogan KAMN27FG6TA Manuel utilisateur

Kogan

Kogan KALED27MONSD Manuel utilisateur

Kogan

Kogan KAMN32F16LB Manuel utilisateur

Kogan

Kogan KAMN29UHWLA Manuel utilisateur

Kogan

Kogan KAMN27F7VA Manuel utilisateur

Kogan

Kogan KAMN27PQFTA Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation