Keysight Technologies PD1000A Manuel utilisateur

Keysight PD1000A Power

Device Test Fixtures for

S-Parameter Measurements

Part of PD1000A Option -SPK Accessory Kit

TO-220, TO-247, and Surface Mount Devices

Operating Guide

Notices

No part of this manual may be repro-

duced in any form or by any means

(including electronic storage and retrieval

or translation into a foreign language)

without prior agreement and written con-

sent from Keysight Technologies, Inc. as

governed by United States and interna-

tional copyright laws.

Manual Part Number

PD1000-90005

Edition

Edition 3, January 2019

Published by

Keysight Technologies, Inc.

900 S. Taft Ave.

Loveland, CO 80537 USA

Sales and Technical Support

To contact Keysight for sales and techni-

cal support, refer to the support links on

the following Keysight websites:

www.keysight.com/find/PD1000A

(product-specific information and sup-

port, software and documentation

updates)

www.keysight.com/find/assist (world-

wide contact information for repair and

service)

Declaration of Conformity

Declarations of Conformity for this prod-

uct and for other Keysight products may

be downloaded from the Web. Go to

http://keysight.com/go/conformity and

click on “Declarations of Conformity.” You

can then search by product number to

find the latest Declaration of Conformity.

Technology Licenses

The hardware and/or software described

in this document are furnished under a

license and may be used or copied only in

accordance with the terms of such

license.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,” AND

IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE EDI-

TIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL WAR-

RANTIES, EITHER EXPRESS OR IMPLIED,

WITH REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS OR

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR OF ANY INFOR-

MATION CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A SEP-

ARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT SHALL CONTROL.

Keysight Technologies does not warrant

third-party system-level (combination of

chassis, controllers, modules, etc.) per-

formance, safety, or regulatory compli-

ance unless specifically stated.

DFARS/Restricted Rights

Notices

If software is for use in the performance

of a U.S. Government prime contract or

subcontract, Software is delivered and

licensed as “Commercial computer soft-

ware” as defined in DFAR 252.227-7014

(June 1995), or as a “commercial item” as

defined in FAR 2.101(a) or as “Restricted

computer software” as defined in FAR

52.227-19 (June 1987) or any equivalent

agency regulation or contract clause.

Use, duplication or disclosure of Software

is subject to Keysight Technologies’ stan-

dard commercial license terms, and non-

DOD Departments and Agencies of the

U.S. Government will receive no greater

than Restricted Rights as defined in FAR

52.227-19(c)(1-2) (June 1987). U.S. Gov-

ernment users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR 252.227-

7015 (b)(2) (November 1995), as applica-

ble in any technical data.

Safety Information

The following general safety precau-

tions must be observed during all

phases of operation of these instru-

ments. Failure to comply with these

precautions or with specific warnings

or operating instructions in the product

manuals violates safety standards of

design, manufacture, and intended use

of the instruments. Keysight Technolo-

gies assumes no liability for the cus-

tomer's failure to comply with these

requirements.

General

Do not use these instruments in any manner

not specified by the manufacturer. The pro-

tective features of these instruments must

not be impaired if it is used in a manner

specified in the operation instructions.

Before Applying Power

Verify that all safety precautions are taken.

Make all connections to the instruments

before applying power. Note the external

markings described under “Safety Symbols”.

Ground the Instrument

Keysight instruments are provided with

a grounding-type power plug. The

instruments must be connected to an

electrical ground to minimize shock

hazard. The ground pin must be firmly

connected to an electrical ground

(safety ground) terminal at the power

outlet. Any interruption of the protec-

tive (grounding) conductor or discon-

nection of the protective earth terminal

will cause a potential shock hazard

that could result in personal injury.

Unless otherwise noted in the specifi-

cations, these instruments or system is

intended for indoor use in an installa-

tion category II, pollution degree 2

environment per IEC 61010-1 and 664

respectively. They are designed to

operate at a maximum relative humid-

ity of 5% to 80% at 40 °C or less (non-

condensing). These instruments or sys-

tem are designed to operate at alti-

tudes up to 3000 meters, and at

temperatures between 0 and 55 °C.Do

Not Operate in an Explosive Atmo-

sphere Do not operate in the presence

of flammable gases or fumes.

Do Not Operate Near Flammable

Liquids

Do not operate the instruments in the

presence of flammable liquids or near

containers of such liquids.

Cleaning

Clean the outside of the Keysight

instruments with a soft, lint-free,

slightly dampened cloth. Do not use

detergent or chemical solvents.

Do Not Remove Instrument Cover

Only qualified, service-trained person-

nel who are aware of the hazards

involved should remove instrument

covers. Always disconnect the power

cable and any external circuits before

removing the instrument cover.

Keep away from live circuits

Operating personnel must not remove

equipment covers or shields. Proce-

dures involving the removal of covers

and shields are for use by service-

trained personnel only. Under certain

conditions, dangerous voltages may

exist even with the equipment

switched off. To avoid dangerous elec-

trical shock, DO NOT perform proce-

dures involving cover or shield removal

unless you are qualified to do so.

DO NOT operate damaged

equipment

Whenever it is possible that the safety

protection features built into these

instruments have been impaired, either

through physical damage, excessive

moisture, or any other reason,

REMOVE POWER and do not use the

instrument until safe operation can be

verified by service-trained personnel. If

necessary, return the product to a Key-

sight Technologies Sales and Service

Office for service and repair to ensure

the safety features are maintained.

DO NOT block the primary

disconnect

The primary disconnect device is the

appliance connector/power cord when

an instrument used by itself, but when

installed into a rack or system the dis-

connect may be impaired and must be

considered part of the installation.

Do Not Modify the Instrument

Do not install substitute parts or per-

form any unauthorized modification to

the product. Return the product to a

Keysight Sales and Service Office to

ensure that safety features are main-

tained.

In Case of Damage

Instruments that appear damaged or

defective should be made inoperative

and secured against unintended oper-

ation until they can be repaired by

qualified service personnel.

Measurement Limits

The Truevolt Series DMMs provide pro-

tection circuitry to prevent damage to

the instrument and to protect against

the danger of electric shock, provided

the Measurement Limits are not

exceeded. To ensure safe operation of

the instrument, do not exceed the

Measurement Limits shown on the

front and rear panel.

The DMMs comply with EN/IEC 61326-

2-1, for sensitive test and measure-

ment equipment.

When subjected to transient radiated

and/or conducted electromagnetic

phenomena, the DMMs may have tem-

porary loss of function or performance

which is self-recovering. Recovery may

take longer than 10 seconds.

When subjected to continuously pres-

ent electromagnetic phenomena, some

degradation of performance may

occur.

Safety Symbols and Notices

A CAUTION denotes a hazard. It

calls attention to an operating pro-

cedure or practice that, if not cor-

rectly performed or adhered to,

could result in damage to the

product or loss of important data.

Do not proceed beyond a CAUTION

notice until the indicated condi-

tions are fully understood and met.

A WARNING denotes a hazard. It

calls attention to an operating pro-

cedure or practice, that, if not cor-

rectly performed or adhered to,

could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indi-

cated conditions are fully under-

stood and met.

Products display the following sym-

bols:

Indicates that antistatic

precautions should be

taken.

Electro-Magnetic Compatibility (EMC) Information

The Test Solution is sensitive to electro-magnetic disturbances in the frequency range of 80 MHz to 6 GHz.

To minimize the risk of incorrect measurements avoid intentional radiators in close proximity to the Test Solution.

Keysight PD1000A Test Fixture Operating Guide vii

Contents

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Incoming Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Returning for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Preparation for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Associated Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Static-safe Handling Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

General Test Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

PD1000A TO-220 and TO-247 Device Test Fixtures . . . . . . . . . . . . . . . . . . . . . 15

Inserting Devices into the TO-220 and TO-247 Test Fixtures . . . . . . . . . . . 16

PD1000A Surface Mount Device Test Fixture . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Inserting Devices into the SMD Test Fixture. . . . . . . . . . . . . . . . . . . . . . . . . 17

Test Fixture Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Fixture Calibration Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Inserting Cal Standards into the PD1000A TO-220/TO-247 Test Fixtures . . . . 26

Input Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Output Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

THROUGH Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Inserting the Cal Standards into the PD1000A SMD Test Fixture. . . . . . . . . . . 28

Customizing an SMD Test Fixture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Adjusting the Height of the Push Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SMA Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Measuring the DC Resistance of the Calibration Standards . . . . . . . . . . . . 36

Use Proper SMA Connector Care and Connection Techniques . . . . . . . . . . . . 38

Final Connection Using a Torque Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Separating Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Inspect and Clean Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

viii Keysight PD1000A Test Fixture Operating Guide

PD1000A Test Fixtures

Operating Guide

General Information

Keysight’s PD1000A Power Device Measurement System for Advanced Modeling

System option -SPK Accessory Kit provides three device test fixtures:

–One for 3-terminal devices with TO-220 style packages (Keysight p/n.

PD1000-67900).

–One for 3-terminal devices with TO-247 style packages (Keysight p/n.

PD1000-67901).

–One for Surface Mount Devices (SMD) with 7-pin TO-263 packages

(Keysight p/n. PD1000-67902).

This accessory kit is used for making S-Parameter measurements.

Incoming Inspection

After unpacking the Test Fixture(s), carefully inspect them for any shipping

damage. Report any damage to the shipping agent immediately, as such

damage is not covered by the warranty.

Returning for Service

If you need to return a test fixture for service, attach a tag indicating the type of

service required, your return address, and model number of the device to be

repaired.

Repackaging the device requires original shipping containers and materials or

their equivalents. Keysight Technologies can provide packaging materials

identical to the original materials. Contact Keysight as per “Sales and Technical

Support” in the front matter of this manual.

Preparation for Use

The PD1000A Test Fixtures connect the device to be tested (DUT) to the Bias T

Networks. Refer to Figure 1 on page 12 for a typical test setup.

Licensing is required to use the PD1000A Power Device

Measurement System Control Software for making On State and

Off State S-Parameter measurement. Refer to the PD1000A

Startup Guide for licensing information.

10 Keysight PD1000A Test Fixture Operating Guide

General Information

Associated Products

In addition to the three test fixtures, the PD1000A-SPK Accessory Kit includes

the following items for S-Parameter measurements.

Description Qty. Photos below are representative, what you receive may be different.

0.56 N-m (5 lb-in) 5/16 in. break-over

torque wrench, Keysight 8710-1582

Type N, Male to SMA Female Adapter 50Ω

Nominal

Keysight PN: 1250-2879

SMA male to SMA Male Cable

Keysight PN: 5062-6682 7-inch cable

Stackable Banana Plug (each end) Cables

Keysight PN: 8121-2006 Black cable

8121-2007 Red cable

84redand

4 black

PD1000A-BST Bias Tee Networks

Keysight PN: PD1000-67903

PD1000-67904

Two are required for the PD1000A system

Calibration Standards for each test fixture.

Calibration Standards for TO-247 Test

Fixture shown on left (Keysight PN:

PD1000-67905).

Calibration Standards for the TO-220 Test

Fixture are similar (Keysight PN:

PD1000-67906).

Calibration Standards for the Surface

Mount Device (SMD) Test Fixture are

shown on right (Keysight PN:

PD1000-67907).

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies W3301A Manuel utilisateur

Keysight Technologies

Keysight Technologies N5511A-K26 Manuel utilisateur

Keysight Technologies

Keysight Technologies EXA N9010A Manuel utilisateur

Keysight Technologies

Keysight Technologies B1500A Manuel utilisateur

Keysight Technologies

Keysight Technologies E5260 Series Mode d'emploi

Keysight Technologies

Keysight Technologies U4164A Manuel utilisateur

Keysight Technologies

Keysight Technologies U1401B Manuel utilisateur

Keysight Technologies

Keysight Technologies M9393A Manuel utilisateur

Keysight Technologies

Keysight Technologies N5250C PNA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies B2980A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies M9393A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies EXA N9010B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N5245-60106 Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9000A Manuel utilisateur

Keysight Technologies

Keysight Technologies N5221/2A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies E5061B Manuel utilisateur

Keysight Technologies

Keysight Technologies IntegraVision PA2200 Series Manuel de service

Keysight Technologies

Keysight Technologies N9020A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N2750A Manuel utilisateur

Keysight Technologies

Keysight Technologies B2900 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies EXA N9010B Guide de démarrage rapide

Keysight Technologies

Keysight Technologies LTE Manuel d'installation

Keysight Technologies

Keysight Technologies N9020B Manuel d'installation et d'exploitation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur