Keysight Technologies B1500A Guide d'installation

Keysight Technologies B1500A

Semiconductor Device Analyzer

Self-paced

Training Manual

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

B1500-90040

Edition

Edition 1, September 2005

Edition 2, May 2006

Edition 3, January 2007 

Edition 4, June 2007

Edition 5, February 2008

Edition 6, October 2008

Edition 7, November 2009

Edition 8, August 2014

Keysight Technologies

1400 Fountaingrove Parkway 

Santa Rosa, CA 95403

Warranty

The material contained in this docu-

ment is provided “as is,” and is subject

to being changed, without notice, in

future ed itions. Further, to the maxi-

mum extent permitted by applicable

law, Keysight disclaims all warranties,

either express or implied, with regard

to this manual and any information

contained herein, including but not

limited to the implied warranties of

merchantability and fitness for a par-

ticular purpose. Keysight shall not be

liable for errors or for incidental or

consequential damages in connection

with the furnishing, use, or perfor-

mance of this document or of any infor-

mation contained herein. Should

Keysight and the user have a separate

written agreement with warranty terms

covering the material in this document

that conflict with these terms, the war-

ranty terms in the separate agreement

shall control.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of a

U.S. Government prime contract or subcon-

tract, Software is delivered and licensed as

“Commercial computer software” as defined

in DFAR 252.227-7014 (June 1995), or as a

“commercial item” as defined in FAR

2.101(a) or as “Restricted computer soft-

ware” as defined in FAR 52.227-19 (June

1987) or any equivalent agency regulation or

contract clause. Use, duplication or disclo-

sure of Software is subject to Keysight Tech-

nologies’ standard commercial license

terms, and non-DOD Departments and

Agencies of the U.S. Government will receive

no greater than Restricted Rights as defined

in FAR 52.227-19(c)(1-2) (June 1987). U.S.

Government users will receive no greater

than Limited Rights as defined in FAR

52.227-14 (June 1987) or DFAR

252.227-7015 (b)(2) (November 1995), as

applicable in any technical data.

In This Manual

This documentis the self-paced training manual to help you to understand what is Keysight

B1500A, what functions the B1500A has, how to use the B1500A, and what applications

the B1500A contributes to.

• Module 1. Introduction

This module explains the product concept and the key features of the B1500A/

EasyEXPERT. You will learn about what is the B1500A.

• Module 2. Basic Measurement

This module explains the basic I-V sweep measurement function and the cabling and

fixturing issues. You will learn how to measure I-V curves in the course exercises.

• Module 3. Low Current Measurement

This module explains the low current measurement technique. You will learn how to

measure the low current in the course exercises.

• Module 4. Capacitance Measurement

This module explains the capacitance measurement function. You will learn how to

measure the capacitance in a course exercise.

• Module 5. SPGU Control and Applications

This module explains the SPGU Control classic test. You will learn how to create the

classic test setup and the applications using SPGU in the course exercises.

Class Exercises

Class exercises use the test setup listed below. The test setup data are only examples and

included in the Demo.xpg file stored in Keysight B1500 Series Product Reference

CD-ROM.

NOTE

Demo.xpg file

Demo.xpg file is required to create the Demo preset group which contains the test setup

data used by the class exercises. And it is stored in the \data folder on Keysight B1500

Series Product Reference CD-ROM.

The Demo preset group should be created before starting the class exercise. To create the

preset group, launch EasyEXPERT and import the file by using the Preset Group Import

dialog box opened by clicking My Favorite Setup > Preset Group > Import Preset Group.

The test setup data are only examples for the class exercises.

Module Exercise Device Test setup/definition/data Page

Module 1 no exercise

Module 2 Id-Vd measurement MOSFET IDVD, Id-Vd 2-7

Id-Vd measurement MOSFET Trace IdVd 2-10

Id-Vd measurement MOSFET Trace IdVd 2-16

SMU series connection 511 kohm IRVR 2-28

SMU parallel connection 1 ohm Parallel 2-32

SMU series resistor 511 kohm IV-res 2-37

Re measurement, kelvin connection Bipolar Tr REKELV 2-50

Module 3 Leak current measurement -Zero-check 3-9

Ultra low current measurement -Zero-check-ASU 3-19

Id-Vg measurement MOSFET IDVG 3-20

Gummel plot Bipolar Tr GUMMEL 3-25

Module 4 C-V sweep measurement MOSFET CV-1MHz 4-6

Module 5 Charge pumping MOSFET Charge Pumping 4T 0.1V

step 5-20

Flash memory MOSFET Demo-S-NorFlash

Endurance 5-29

ALWG output 511 kohm ALWG monitor 5-36

NOTE

.xtd files

The \data folder stores some .xtd files. They are the application test definitions used by

some class exercises. To use the definition file, import the file by using the Test Definition

Import dialog box opened by clicking Library > Import Test Definition. The test definition

data are only examples for the class exercises.

NOTE

.xtr files

The \data folder also stores some .xtr files. They are the sample test results created by

executing the test setup which has the same name as the result data. To display these

sample test results, import the files by using the Test Result Import dialog box opened by

clicking Results > Transport Data > Import.

NOTE

About sample data

The test setup data described in this manual are only examples. If these example data

damage your devices, Keysight is NOT LIABLE for the damage.

Required Devices for Class Exercises

To perform the class exercises, you need the device set (Keysight part number

04156-87001) which contains the following devices.

Description Quantity

N-channel MOSFET 2 ea.

NPN Bipolar Transistor 1 ea.

Red Miniature LED 1 ea.

0.1 F Capacitor 50 V 1 ea.

1.0 Resistor 1/8 W 1 ea.

1.1 kResistor 1/8 W 1 ea.

511 kResistor 1/8 W 1 ea.

NPN bipolar TransistorN-ch MOSFET LED

1 ohm Resistor

Brown

Black

Silver

1.1 kohm Resistor

Brown

Black

Brown

511 kohm Resistor

Green

Brown

Orange

0.1 uF Capacitor

Required Accessories for Class Exercises

To perform the class exercises, you need the following accessories. Prepare the accessories

shown below.

Designation Description Model No. Qty.

1Test Fixture a16442A or

16442B

(B1500A-A5F)

a. The 16058A Test Fixture for the 4145A/B may be substituted for the

16442A/B Test Fixture. If you use the 16058A, you also need the 16435A

Interlock Adapter.

1 ea.

28 pin socket module 1 ea.

Connection wire 6 ea.

2Triaxial Cable 16494A 4 ea.

3Interlock Cable 16493J 1 ea.

4Kelvin Triaxial Cable, for Module 2 16493K 1 ea.

5CMU Cable, for Module 4 N1300A 1 ea.

6Atto Sense/Switch Unit, for Module 3 E5288A 1 ea.

ASU control cable, triax cable, for Module 3 16493M 1 ea.

16442A/B Test Fixture (1ea.)

Triaxial Cable (4ea.)

INTLK Cable (1ea.)

Connection Wire (6ea.)

28 pin DIP Socket Module (1ea.)

5CMU Cable (1ea.)

E5288A ASU (1ea.)

Triaxial Cable (1ea.)

Control Cable (1ea.)

Kelvin Triaxial Cable (1ea.)

To perform the flash memory class exercise in Module 5 and if you use the ASU, you need

the following accessories.

To perform the flash memory class exercise in Module 5 and if you use the selector, you

need the following accessories.

Description Model No. Qty.

ASU (Atto Sense/Switch Unit) with control cable E5288A Total

3sets

Triaxial Cable 16494A or

equivalent Total

7ea.

BNC-SMA Cable 16493P 3 ea.

SMA-SMA Cable, for synchronization of SPGU 16493Q 2 ea.

Description Model No. Qty.

SMU/PG selector with control cable 16440A

(B1500A-A04) 2 sets

Selector adapter with control cable 16445A 1 set

Triaxial Cable 16494A or

equivalent Total

7ea.

BNC-SMA Cable 16493P 3 ea.

SMA-SMA Cable, for synchronization of SPGU 16493Q 2 ea.

Autres manuels pour B1500A

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies E4980A Guide de démarrage rapide

Keysight Technologies

Keysight Technologies N9000B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N6705C Manuel de service

Keysight Technologies

Keysight Technologies M9710A Guide rapide

Keysight Technologies

Keysight Technologies MXA Series Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies M9393A Mode d'emploi

Keysight Technologies

Keysight Technologies U5310A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies E4980A Manuel de l'opérateur

Keysight Technologies

Keysight Technologies N5245-60106 Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 8970B Manuel utilisateur

Keysight Technologies

Keysight Technologies B2900B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies Option 503 Manuel utilisateur

Keysight Technologies

Keysight Technologies X Series Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9010B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies FieldFox N9912A104 Manuel utilisateur

Keysight Technologies

Keysight Technologies N9030A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 11590B Manuel de service

Keysight Technologies

Keysight Technologies ENA Series Guide de démarrage rapide

Keysight Technologies

Keysight Technologies B2981A Guide d'installation

Keysight Technologies

Keysight Technologies U5303A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies N9010A Series Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N4960A Manuel utilisateur

Keysight Technologies

Keysight Technologies N774 C Series Manuel utilisateur

Keysight Technologies

Keysight Technologies M9393A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur