Keysight Technologies N5241BU-677 Manuel utilisateur

INSTALLATION GUIDE

)

Keysight - N5241/2/9A&B

Add 4-Port Capabilities -

Upgrade Kit

(For Version 7

Synthesizers)

- Installation Guide

(For Models With Direct Digital

Synthesis (Only))

To Upgrade PNA N5241B, N5242B, or

N5249B Option 217 to Option 417

For Analyzers with Serial Numbers

Prefixed MY/SG/US5201 and Above

Upgrade Kit Order Numbers:

N5241BU-677, N5242BU- 677 and

N5249BU- 677

Keysight Kit Number: N5242-60127

This is the Installation Guide for the N5241/2/9A&B Series Microwave Network Analyzers.

Notices

©Keysight Technologies, Inc.

2009-2022

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

N5242-90127

Edition

Edition 1, December 2022

Printed in USA/Malaysia

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TOTHIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TOTHE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined

by Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which

the software is customarily

provided to the public.

Accordingly, Keysight provides

the Software to U.S. government

customers under its standard

commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of

which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA

represents the exclusive authority

by which the U.S. government

may use, modify, distribute, or

disclose the Software. The EULA

and the license set forth therein,

does not require or permit,

among other things, that

Keysight: (1) Furnish technical

information related to

commercial computer software

or commercial computer

software documentation that is

not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the

government rights in excess of

these rights customarily provided

to the public to use, modify,

reproduce, release, perform,

display, or disclose commercial

computer software or

commercial computer software

documentation. No additional

government requirements

beyond those set forth in the

EULA shall apply, except to the

extent that those terms, rights, or

licenses are explicitly required

from all providers of commercial

computer software pursuant to

the FAR and the DFARS and are

set forth specifically in writing

elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise

modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and

DFARS 227.7102, the U.S.

government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5

(c), as applicable in any technical

data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight Add 4-Port Capability Upgrade Kit

Upgrade Kit Number: N5242-60127

Installation Note

Description of the Upgrade

The following may apply to your “B” model PNA–X: In June 2013, the

N5241A/AS and N5242A/AS analyzers underwent significant hardware

changes. Some components that have 2.4 mm connectors (bias tees,

couplers, and some semi-rigid cables) were replaced with components

that have 3.5 mm connectors.

If your analyzer’s serial number prefix is MY/SG/US5310 and below:

Your analyzer was originally shipped with 2.4 mm components. Bias tees

with 2.4 mm connectors are no longer available, so the bias tees and

connecting cables included in this kit have 3.5 mm connectors. Since they

are interconnected, the 2.4 mm couplers and connecting cables in your

analyzer must be replaced with the new 3.5 mm items included in this kit.

If your analyzer’s serial number prefix is MY/SG/US5321 and above:

Your analyzer was shipped with 3.5 mm components, so it is not necessary

to replace the couplers and connecting cables. These items are included in

this kit, but will not be used for your upgrade. Set them aside for possible

use in the future.

Be very careful to use the appropriate hardware in your analyzer. Using the

wrong hardware can ruin analyzer components, resulting in additional

customer costs.

If you had an A model PNA-X with Option 219/419 with Option H85 that

was upgraded to a B model, please refer to Options 217/417. If you had an

A model PNA-X with Option 224/423 with Option H85 that was upgraded

to a B model then refer to Option 222/422.

6 Installation Note N5242-90127

Description of the Upgrade

This upgrade converts your N5241B or N5242B or N5249B Option 217 2-port

analyzer to a N5241B, N4242B, or N5249B with Option 417:

— an additional 26.5 GHZ source board

— a x4 direct digital synthesizer (DDS) assembly

—anadditionalmixerbricks

— two additional bridges

—fourcouplers

— two additional source attenuators

— two additional receiver attenuators

—asplitter

— a modified front panel, including 2 new test ports

—manynewcables

Refer to “Overview of the Installation Procedure” on page 17.

This repair must be done at a service center or a self-maintainer service

center! Refer to “Getting Assistance from Keysight” on page 7.

This upgrade kit is for upgrading 2-port Option 217 models with (x2) direct

digital synthesis (DDS) to a 4-port Option 417 with DDS only.

Installation Note N5242-90127 7

Description of the Upgrade

Getting Assistance from Keysight

Installing this upgrade kit requires special skills and experience. If you think

you may not be qualified to do the work, or need advice, contact Keysight.

Contacting Keysight

Assistance with test and measurements needs and information on finding a

local Keysight office are available on the Web at:

http://www.keysight.com/find/assist

If you do not have access to the Internet, please contact your Keysight field

engineer.

If You Have Problems With the Upgrade Kit Contents

Keysight stands behind the quality of the upgrade kit contents. If you have

problems with any item in the kit, refer to www.keysight.com and the Contact

Keysight ()link.

In any correspondence or telephone conversation, refer to the Keysight

product by its model number and full serial number. With this information,

the Keysight representative can determine whether your product is still

within its warranty period.

8 Installation Note N5242-90127

Description of the Upgrade

Getting Prepared

To successfully install this upgrade kit, you will need the following:

—Alicensekey-referto“License Key Redemption” below.

— A PDF copy or a paper copy of the PNA–X Service Guide - refer to

“Downloading the Online PNA–X Service Guide” below.

— An ESD-safe work area - refer to “Protecting Your Workspace from

Electrostatic Discharge” below.

— Correct tools - refer to “Tools Required for the Installation” on page 12.

— Enough time - refer to “About Installing the Upgrade” on page 12.

— Test equipment for the post-upgrade adjustments. To view the equipment

list, click the Chapter 3 bookmark “Tests and Adjustments” in the PDF

Service Guide1.

The PNA contains extremely sensitive components that can be ruined if

mishandled. Follow instructions carefully when making cable connections,

especially wire harness connections.

The person performing the work accepts responsibility for the full cost of

the repair or replacement of damaged components.

IMPORTANT!

—This document contains references to legacy and to a new A21

HMA26.5 Multiplier/Amplifier assembly. Your model instrument may

have a legacy HMA26.5 or a new HMA26.5 assembly. Both types of

assemblies are compatible with this upgrade. This note is for your

reference, because some figures contain legacy assemblies that your

instrument may not have installed.

—If you want to verify your instrument’s A21 HMA26.5

Multiplier/Amplifier, refer to “Verify the Model/Version of HMA26.5

Installed” on page 10.

—See also, your instrument’s PDF Service Guide a.

a. See “Downloading the Online PNA–X Service Guide” on page 11.

1. See “Downloading the Online PNA–X Service Guide” on page 11.

Installation Note N5242-90127 9

Description of the Upgrade

Getting Prepared

License Key Redemption

To enable the option product(s), you must request license key(s) file from the

Keysight Software Manager:

http://www.keysight.com/find/softwaremanager:

To complete the request, you will need to gather the following information:

— From the certificate

— Order number

— Certificate number

— From your instrument

(Instrument information is available in the network analyzer - on the

toolbar, click Help, then click About Network Analyzer.)

— Model number

— Serial number

Using the information just gathered, you must request license key(s) from the

Keysight Software Manager:

http://www.keysight.com/find/softwaremanager.

You will need to provide an email address, to which Keysight will promptly

email your license key file. Refer to “License Key Redemption” on page 9.

Verify the License Contents

Refer to the license message you received from Keysight:

If the model number, serial number, or option number do not match those on

the license message you received from Keysight, you will not be able to install

the license key file. If this is the case, contact Keysight for assistance. Refer to

“Getting Assistance from Keysight” on page 7.

Ensure that you are connected to an external server, before attempting to

download your email and license key file.

If you are unfamiliar with the licensing process, refer to the

https://www.keysight.com/us/en/assets/9018-04534/installation-guides

/9018-04534.pdf (N5242-90024).

The enclosed Software Entitlement Certificate is a receipt, verifying that

you have purchased a licensed option for the PNA–X of your choice. You

must now use a Keysight Web page to request a license key file for the

instrument that will receive the option.

10 Installation Note N5242-90127

Description of the Upgrade

Getting Prepared

Verify the Model/Version of HMA26.5 Installed

This upgrade kit contains components for use with PNA models using the

legacy HMA26.5 part number 5087-7765. If your PNA has the newer HMA26.5

part number N5240-60101 installed you may discard these parts:

— A22 splitter 5087-7139

— W42 N5222-20009

— W43 N5222-20007

— W44 N5222-20008

(If you have the legacy 5086-7765 HMA26.5, please discard the N5245-20195

semi-rigid cables. Refer to Figure 1 on page 10.)

The new N5240-60101 HMA26.5 has the splitter integrated into the assembly.

Refer to Figure 1 on page 10.

Figure 1 Comparison of Legacy HMA26.5 (5087-7765) and New HMA26.5

(N5240-60101)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies N774 C Series Manuel utilisateur

Keysight Technologies

Keysight Technologies P50 B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9020B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9041B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N5241B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies MXA N9020A-508 Manuel utilisateur

Keysight Technologies

Keysight Technologies N9030B Guide de démarrage rapide

Keysight Technologies

Keysight Technologies FieldFox A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies B2980A Series Guide d'installation

Keysight Technologies

Keysight Technologies 8163A/B Mode d'emploi

Keysight Technologies

Keysight Technologies M9393A Manuel utilisateur

Keysight Technologies

Keysight Technologies U4431A Manuel utilisateur

Keysight Technologies

Keysight Technologies E5260 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies EXA N9010B Guide de démarrage rapide

Keysight Technologies

Keysight Technologies X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9030A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies M9300A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies N9020B Manuel

Keysight Technologies

Keysight Technologies 16861A Manuel utilisateur

Keysight Technologies

Keysight Technologies 16197A Manuel d'utilisation

Keysight Technologies

Keysight Technologies N99xxA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U1732C Manuel utilisateur

Keysight Technologies

Keysight Technologies N524 A Series Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9040B Manuel d'installation et d'exploitation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur