Keysight Technologies 16861A Manuel utilisateur

Keysight 16860 Series

Portable Logic Analyzers

Service Guide

2Keysight 16860 Series Portable Logic Analyzer Service Guide

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Keysight

Technologies as governed by United States

and international copyright laws.

Manual Part Number

16860-97007

Edition

Second edition, September 2018

Available in electronic format only

Keysight Technologies

1900 Garden of the Gods Road

Colorado Springs, CO 80907 USA

Warranty

THE MATERIAL CONTAINED IN THIS DOCU-

MENT IS PROVIDED "AS IS," AND IS SUB-

JECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL OR CON-

SEQUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, USE, OR PERFOR-

MANCE OF THIS DOCUMENT OR ANY

INFORMATION CONTAINED HEREIN.

SHOULD KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE MATE-

RIAL IN THIS DOCUMENT THAT CONFLICT

WITH THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE AGREEMENT WILL

CONTROL.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

U.S. Government Rights

The Software is "commercial computer soft-

ware," as defined by Federal Acquisition

Regulation ("FAR") 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement ("DFARS")

227.7202, the U.S. government acquires

commercial computer software under the

same terms by which the software is cu tem-

porarily provided to the public. Accordingly,

Keysight provides the Software to U.S. gov-

ernment customers under its standard com-

mercial license, which is embodied in its

End User License Agreement (EULA), a copy

of which can be found at http://www.key-

sight. com/find/sweula. The license set

forth in the EULA represents the exclusive

authority by which the U.S. government may

use, modify, distribute, or disclose the Soft-

ware. The EULA and the license set forth

therein, does not require or permit, among

other things, that Keysight: (1) Furnish tech-

nical information related to commercial

computer software or commercial computer

software documentation that is not custom-

arily provided to the public; or (2) Relinquish

to, or otherwise provide, the government

rights in excess of these rights customarily

provided to the public to use, modify, repro-

duce, release, perform, display, or disclose

commercial computer software or commer-

cial computer software documentation. No

additional government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms, rights,

or licenses are explicitly required from all

providers of commercial computer software

pursuant to the FAR and the DFARS and are

set forth specifically in writing elsewhere in

the EULA. Keysight shall be under no obliga-

tion to update, revise or otherwise modify

the Software. With respect to any technical

data as defined by FAR 2.101, pursuant to

FAR 12.211 and 27.404.2 and DFARS

227.7102, the U.S. government acquires no

greater than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data. 52.227-14

(June 1987) or DFAR 252.227-7015 (b)(2)

(November 1995), as applicable in any tech-

nical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating proce-

dure, practice, or the like that, if not

correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not pro-

ceed beyond a CAUTION notice until

the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating pro-

cedure, practice, or the like that, if

not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Keysight 16860 Series Portable Logic Analyzer Service Guide 3

Additional Safety Notices

This apparatus has been designed and tested in accordance with IEC Publication 1010, Safety

Requirements for Measuring Apparatus, and has been supplied in a safe condition. This is a Safety

Class I instrument (provided with terminal for protective earthing). Before applying power, verify that

the correct safety precautions are taken (see the following warnings). In addition, note the external

markings on the instrument that are described under “Safety Symbols.”

Warnings

• Before turning on the instrument, you must connect the protective earth terminal of the

instrument to the protective conductor of the (mains) power cord. The mains plug shall only be

inserted in a socket outlet provided with a protective earth contact. You must not negate the

protective action by using an extension cord (power cable) without a protective conductor

(grounding). Grounding one conductor of a two-conductor outlet is not sufficient protection.

• Only fuses with the required rated current, voltage, and specified type (normal blow, time delay,

etc.) should be used. Do not use repaired fuses or short-circuited fuseholders. To do so could

cause a shock or fire hazard.

• If you energize this instrument by an auto transformer (for voltage reduction or mains isolation),

the common terminal must be connected to the earth terminal of the power source.

• Whenever it is likely that the ground protection is impaired, you must make the instrument

inoperative and secure it against any unintended operation.

• Service instructions are for trained service personnel. To avoid dangerous electric shock, do not

perform any service unless qualified to do so. Do not attempt internal service or adjustment

unless another person, capable of rendering first aid and resuscitation, is present.

• Do not install substitute parts or perform any unauthorized modification to the instrument.

• Capacitors inside the instrument may retain a charge even if the instrument is disconnected from

its source of supply.

• Do not operate the instrument in the presence of flammable gasses or fumes. Operation of any

electrical instrument in such an environment constitutes a definite safety hazard.

• Do not use the instrument in a manner not specified by the manufacturer.

Safety Symbols

Instruction manual symbol: the product is marked with this symbol when it is necessary for you to

refer to the instruction manual in order to protect against damage to the product.

Indicates hazardous voltages and potential for electrical shock.

Earth terminal symbol: Used to indicate a circuit common connected to grounded chassis.

The C-tick mark is a registered trademark of the Spectrum Management Agency of Australia. This

signifies compliance with the Australia EMC Framework regulations under the terms of the Radio

Communication Act of 1992.

CE compliance marking to the EU Safety and EMC Directives.

ISM GRP-1A classification according to the international EMC standard.

ICES/NMB-001 compliance marking to the Canadian EMC standard.

4Keysight 16860 Series Portable Logic Analyzer Service Guide

KC certification mark to demonstrate compliance with the South Korean EMC requirements.

South Korean Class A EMC declaration:

This equipment is Class A suitable for professional use and is for use in electromagnetic

environments outside of the home.

CSA is the Canadian certification mark to demonstrate compliance with the Safety requirements.

Notice for the European Community: This product complies with the WEEE Directive (2002/96/EC)

marking requirements. The affixed label indicates that you must not discard this electrical/electronic

product in domestic household waste. Product Category: With reference to the equipment types in

the WEEE Directive Annex I, this product is classed as a “Monitoring and Control instrumentation”

product.

Do not dispose in domestic household waste. To return unwanted products, contact your local

Keysight office or get more information from www.keysight.com/environment/product.

Keysight 16860 Series Portable Logic Analyzer Service Guide 5

Keysight 16860 Series Logic Analyzer - At a Glance

The Keysight Technologies 16860 series logic analyzers are portable logic analyzers that range from

34 to 136 logic acquisition channels, depending on the model.

The 16860-series models provide features such as:

•deeper memory

•¼ channel 10GHz Timing mode

•deskew of timing traces by individual channels

•single as well as multiple clocks support

•advanced clocking capabilities

•clock hysteresis

•various clock modes such as Master, Dual Sample, Master/Slave, and Demultiplex.

This series of logic analyzers can be used:

•at a higher speed (700MHz to 12.5 MSps) for debug, validation and analysis of DDR and LPDDR

memory systems.

•at a lower speed (350MHz to 0 MSps) as a medium to high performance general purpose logic

analyzer.

Model Comparison

Features, Logic Acquisition

•2 M to 128 M samples of memory depth per channel (depending on memory option), software

upgradeable.

•350 MHz or 700 MHz maximum state clock rate (depending on state speed option), software

upgradeable.

•Full Channel Timing Mode at 2.5 GHz sampling with 12.5 GHz Timing Zoom.

•Half Channel Timing Mode at 5.0 GHz sampling with 12.5 GHz Timing Zoom

Keysight Model Number 16861A 16862A 16863A 16864A

Logic acquisition channels 34 68 102 136

6Keysight 16860 Series Portable Logic Analyzer Service Guide

•Quarter Channel Timing Mode at 10 GHz sampling with 12.5 GHz Timing Zoom

•Eye scan (automatic threshold and sample position setup) feature.

•Single-ended and differential probing support

Features, Mainframe

•Built-in 15 inch color touch screen with 1024 x 768 resolution

•Removable hard drive

•10/100/1000 Base-T LAN port

•USB 2.0 ports (four total, two on front, two on back)

•USB 3.0 ports (two total, both ports are on the back)

•One PCI expansion slot

•One PCI Express x1 expansion slot

•Windows 7 installation

•Keysight Logic and Protocol Analyzer application which takes the complexity out of making

logic analyzer measurements. You can perform all operations directly from one window.

To know about these features in detail, refer to the 16860 series logic analyzer Data Sheet

(5992-1723EN) on www.keysight.com and the Logic and Protocol Analyzer online help installed with

the Logic and Protocol Analyzer software.

Supplied Accessories

•USB mouse

•USB keyboard

•Accessory pouch and power cord

Snap the accessories pouch to the top of the 16860 series logic analyzer. Use it to store probe leads,

accessories, or manuals. Use the tie-down straps under the flap to conveniently hold pod cables not

in use or during transport.

Optional Accessories

• Probes

Service Strategy

The service strategy for this instrument is the replacement of defective assemblies/parts. This service

guide contains information for finding a defective assembly by testing and returning it to Keysight

Technologies for all service work, including troubleshooting. Contact your nearest Keysight

Technologies Sales Office for more details.

Contacting Keysight Technologies

To locate a sales or service office near you, go to www.keysight.com/find/contactus.

Keysight 16860 Series Portable Logic Analyzer Service Guide 7

In This Service Guide

This book is the service guide for the 16860 series logic analyzer.

This service guide has seven chapters.

Chapter 1, “General Information” contains information about the instrument, lists accessories for the

module, gives specifications and characteristics of the instrument, and provides a list of the

equipment required for servicing the instrument.

Chapter 2, “Preparing for Troubleshooting or Performance Testing” tells how to prepare the

instrument for use.

Chapter 3, “Testing 16860 Series Logic Analyzers Performance” tells how to verify the 16860 series

logic analyzer performance with specifications.

Chapter 4, “Calibrating” contains calibration instructions for the instrument (if required).

Chapter 5, “Troubleshooting” contains explanations of self-tests and flowcharts for troubleshooting

the instrument.

Chapter 6, “Removing, Replacing, or Returning 16860 Series Logic Analyzer Assemblies” describes

how to replace the instrument and assemblies of the instrument, and how to return these to Keysight

Technologies.

Chapter 7, “Replaceable Parts” contains a list of replaceable parts available for 16860 Series Logic

Analyzers and how to order these parts.

8Keysight 16860 Series Portable Logic Analyzer Service Guide

Keysight 16860 Series Portable Logic Analyzer Service Guide 9

Contents

Keysight 16860 Series Logic Analyzer - At a Glance 5

Model Comparison 5

Features, Mainframe 6

Supplied Accessories 6

Optional Accessories 6

In This Service Guide 7

1 General Information

Accessories 14

Probes, Cables, and Accessories 14

Software 14

Specifications 15

Characteristics 16

2 Preparing for Troubleshooting or Performance Testing

Operating Environment 18

To apply power 19

To clean the instrument 20

To start the user interface 21

To test the 16860 series logic analyzer 22

3 Testing 16860 Series Logic Analyzers Performance

Perform the Self-Tests 25

Equipment Required for the Performance Test 26

Assemble the SMA/Flying Lead Test Connectors 27

Set Up the Test Equipment 30

Connect the Test Equipment 33

Connect the Logic Analyzer Pod to the Pulse Generator 33

Test the 16860 series Logic Analyzer 35

10 Keysight 16860 Series Portable Logic Analyzer Service Guide

Contents

Create Test Configuration Files 36

Create Configuration File 1 - Multiple Clocks (no Marker) 36

Create Configuration File 2 - Multiple Clocks (with Marker) 39

Create Configuration File 3 - Single Clock (no Marker) 42

Create Configuration File 4 - Single Clock with Marker 43

Determine Maximum Data Rate for Multiple Clocks Mode 45

Pod 1 Clock - Maximum Clock Rate 45

Pod 1 Clock - Setup for Maximum Data Rate 46

Pod 1 Clock - Measuring Maximum Data Rate 50

Pod 2 Clock - Maximum Clock Rate 51

Pod 2 Clock - Setup for Maximum Data Rate 53

Pod 2 Clock - Measuring Maximum Data Rate 54

Pod 3 Clock - Maximum Clock Rate 55

Pod 3 Clock - Setup for Maximum Data Rate 56

Pod 3 Clock - Measuring Maximum Data Rate 57

Pod 4 Clock - Maximum Clock Rate 59

Pod 4 Clock - Setup for Maximum Data Rate 60

Pod 4 Clock - Measuring Maximum Data Rate 61

Determine Maximum Data Rate for Single Clock Mode 63

Single Clock Rising Edge - Maximum Clock Rate 63

Single Clock Rising Edge - Pod 1 Data - Setup for Maximum Data Rate 65

Single Clock Rising Edge - Pod 1 Data - Measuring Maximum Data Rate 66

Single Clock Falling Edge - Maximum Clock Rate 67

Single Clock Falling Edge - Pod 1 Data - Setup for Maximum Data Rate 68

Single Clock Falling Edge - Pod 1 Data - Measuring Maximum Data Rate 69

Single Clock Both Edges - Maximum Clock Rate 70

Single Clock Both Edges - Pod 1 Data - Setup for Maximum Data Rate 72

Single Clock Both Edges - Pod 1 Data - Measuring Maximum Data Rate 72

Single Clock Both Edges - Pod 2 Data - Setup for Maximum Data Rate 73

Single Clock Both Edges - Pod 2 Data - Measuring Maximum Data Rate 74

Single Clock Both Edges - Pods 3 to 8 75

Conclude the State Data Rate Tests 76

Performance Test Record 77

4Calibrating

Calibration Strategy 80

5 Troubleshooting

To use the system troubleshooting flowcharts 82

To use the logic acquisition troubleshooting flowcharts 87

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies N7373C Manuel

Keysight Technologies

Keysight Technologies E5061B ENA Series Manuel utilisateur

Keysight Technologies

Keysight Technologies B2900A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 53147A Manuel utilisateur

Keysight Technologies

Keysight Technologies FieldFox N9927-90002 Manuel utilisateur

Keysight Technologies

Keysight Technologies S9106AC-2IF Guide de l'utilisateur

Keysight Technologies

Keysight Technologies BT2152A Manuel de service

Keysight Technologies

Keysight Technologies N9322C Manuel utilisateur

Keysight Technologies

Keysight Technologies N5224/5A Manuel utilisateur

Keysight Technologies

Keysight Technologies N9040B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 11590B Manuel de service

Keysight Technologies

Keysight Technologies FieldFox B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies B1500A Mode d’emploi

Keysight Technologies

Keysight Technologies FieldFox N9912A104 Manuel utilisateur

Keysight Technologies

Keysight Technologies N9020A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9030B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies B1500A Manuel utilisateur

Keysight Technologies

Keysight Technologies U4164A Manuel utilisateur

Keysight Technologies

Keysight Technologies FieldFox N9912A Manuel du propriétaire

Keysight Technologies

Keysight Technologies B1505A Manuel utilisateur

Keysight Technologies

Keysight Technologies FieldFox Manuel utilisateur

Keysight Technologies

Keysight Technologies PXA N9030A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N5244/5B Manuel utilisateur

Keysight Technologies

Keysight Technologies E5061B Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur