Keysight Technologies M8131A Manuel utilisateur

User's Guide

Keysight M8131A

16/32 GSa/s Digitizer

Notices

No part of this manual may be reproduced

in any form or by any means (including

electronic storage and retrieval or

translation into a foreign language) without

prior agreement and written consent from

Keysight Technologies as governed by

United States and international copyright

laws.

Trademarks

PCI Express®and PCIe®are registered

trademarks of PCI-SIG.

Manual Part Number

M8131-91010

Edition

Edition 5.0, August 2019

Keysight Technologies Deutschland GmbH

Herrenberger Strasse 130,

71034 Böblingen, Germany

Technology Licenses

The hardware and/or software described in

this document are furnished under a

license and may be used or copied only in

accordance with the terms of such license.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal Acquisition

Regulation (“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and Department of

Defense FAR Supplement

(“DFARS”) 227.7202, the U.S. government

acquires commercial computer software

under the same terms by which the

software is customarily provided to the

public. Accordingly, Keysight provides the

Software to U.S. government customers

under its standard commercial license,

which is embodied in its End User License

Agreement (EULA), a copy of which can be

found at http://www.key-

sight.com/find/sweula. The license set

forth in the EULA represents the exclusive

authority by which the U.S. government

may use, modify, distribute, or disclose the

Software. The EULA and the license set

forth therein, does not require or permit,

among other things, that Keysight:

(1) Furnish technical information related to

commercial computer software or

commercial computer software

documentation that is not customarily

provided to the public; or (2) Relinquish to,

or otherwise provide, the government

rights in excess of these rights customarily

provided to the public to use, modify,

reproduce, release, perform, display, or

disclose commercial computer software or

commercial computer software

documentation. No additional government

requirements beyond those set forth in the

EULA shall apply, except to the extent that

those terms, rights, or licenses are

explicitly required from all providers of

commercial computer software pursuant to

the FAR and the DFARS and are set forth

specifically in writing elsewhere in the

EULA. Keysight shall be under no obligation

to update, revise or otherwise modify the

Software. With respect to any technical

data as defined by FAR 2.101, pursuant to

FAR 12.211 and 27.404.2 and DFARS

227.7102, the U.S. government acquires no

greater than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED "AS IS," AND IS

SUBJECT TO BEING CHANGED, WITHOUT

NOTICE, IN FUTURE EDITIONS. FURTHER,

TO THE MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT DISCLAIMS

ALL WARRANTIES, EITHER EXPRESS OR

IMPLIED WITH REGARD TO THIS MANUAL

AND ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT SHALL

NOT BE LIABLE FOR ERRORS OR FOR

INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE OF

THIS DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD KEYSIGHT

AND THE USER HAVE A SEPARATE

WRITTEN AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH THESE

TERMS, THE WARRANTY TERMS IN THE

SEPARATE AGREEMENT WILL CONTROL.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data.

Do not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

WARNING

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

2Keysight M8131A 16/32 GSa/s Digitizer User’s Guide

Keysight M8131A 16/32 GSa/s Digitizer User’s Guide 3

Safety Summary

The following general safety precautions must be observed during all phases of operation

of this instrument. Failure to comply with these precautions or with specific warnings or

operating instructions in the product manuals violates safety standards of design,

manufacture, and intended use of the instrument. Keysight Technologies assumes no

liability for the customer's failure to comply with these requirements. Product manuals

are provided with your instrument on CD-ROM and/or in printed form. Printed manuals

are an option for many products. Manuals may also be available on the Web. Go to

www.keysight.com and type in your product number in the Search field at the top of the

page. Safe operation and the general safety precautions for the M9502A and M9505A

AXIe chassis, must be followed. See: http://www.keysight.com/find/M9505A.

Initial Inspection Inspect the shipping container for damage. If there is damage to the container or

cushioning, keep them until you have checked the contents of the shipment for

completeness and verified the instrument both mechanically and electrically. The

Performance Tests give procedures for checking the operation of the instrument. If the

contents are incomplete, mechanical damage or defect is apparent, or if an instrument

does not pass the operator’s checks, notify the nearest Keysight Technologies

Sales/Service Office.

WARNING To avoid hazardous electrical shock, do not perform electrical tests when

there are signs of shipping damage to any portion of the outer enclosure (covers, panels,

etc.).

General This product is a Safety Class 3 instrument (provided with a protective earth terminal).

The protective features of this product may be impaired if it is used in a manner not

specified in the operation instructions.

Laser Safety Information Class 1 Laser product according IEC60825-1 (2007).

Environment Conditions This instrument is intended for indoor use in an installation category II, pollution degree 2

environment. It is designed to operate within a temperature range of 0 °C – 40 °C

(32 °F – 105 °F) at a maximum relative humidity of 80% and at altitudes of up to

2000 meters.

This module can be stored or shipped at temperatures between -40 °C and +70 °C.

Protect the module from temperature extremes that may cause condensation within it.

Before Applying Power Verify that all safety precautions are taken. The power cable inlet of the instrument serves

as a device to disconnect from the mains in case of hazard. The instrument must be

positioned so that the operator can easily access the power cable inlet. When the

instrument is rack mounted the rack must be provided with an easily accessible mains

switch.

Line Power Requirements The Keysight M8131A operates when installed in an Keysight AXIe mainframe.

4Keysight M8131A 16/32 GSa/s Digitizer User’s Guide

Do Not Operate in an

Explosive Atmosphere

Do not operate the instrument in the presence of flammable gases or fumes.

Do Not Remove the

Instrument Cover

Operating personnel must not remove instrument covers. Component replacement and

internal adjustments must be made only by qualified personnel.

Instruments that appear damaged or defective should be made inoperative and secured

against unintended operation until they can be repaired by qualified service personnel.

Ground the Instrument To minimize shock hazard, the instrument chassis and cover must be connected to an

electrical protective earth ground. The instrument must be connected to the ac power

mains through a grounded power cable, with the ground wire firmly connected to an

electrical ground (safety ground) at the power outlet. Any interruption of the protective

(grounding) conductor or disconnection of the protective earth terminal will cause a

potential shock hazard that could result in personal injury.

Keysight M8131A 16/32 GSa/s Digitizer User’s Guide 5

Instrument Markings

The Table 1 lists the definitions of markings that may be on or with the product.

Table 1 Instrument Markings

Marking Description

The instruction documentation symbol. The product is marked with this symbol

when it is necessary for the user to refer to the instruction in the documentation.

Frame or chassis ground terminal. Typically connects to the equipment’s metal

frame.

KC is the Korean certification mark to demonstrate that the equipment is Class A

suitable for professional use and is for use in electromagnetic environments outside

of the home.

Indicates that anti-static precautions should be taken.

China Restricted Substance Product Label. The EPUP (environmental protection use

period) number in the center indicates the time period during which no hazardous

or toxic substances or elements are expected to leak or deteriorate during normal

use and generally reflects the expected useful life of the product.

The RCM mark is a registered trademark of the Australian Communications and

Media Authority.

The CSA mark is a registered trademark of the CSA International.

6Keysight M8131A 16/32 GSa/s Digitizer User’s Guide

Compliance and Environmental Information

Table 2 Compliance and Environmental Information

The CE mark is a registered trademark of the European Community (if accompanied

by a year, it is the year when the design was proven). This product complies with all

relevant directives.

Universal recycling symbol. This symbol indicates compliance with the China

standard GB 18455-2001 as required by the China RoHS regulations for

paper/fiberboard packaging.

The Keysight email address is required by EU directives applicable to our product.

Marking Description

Safety Symbol Description

This product complies with WEEE Directive (2002/96/EC) marking requirements.

The affixed label indicates that you must not discard this electrical/electronic

product in domestic household waste.

Product Category: With reference to the equipment types in WEEE Directive Annex I,

this product is classed as a “Monitoring and Control instrumentation” product.

Do not dispose in domestic household waste.

To return unwanted products, contact your local Keysight office, or see

http://about.keysight.com/en/companyinfo/environment/takeback.shtml for more

information.

Keysight M8131A 16/32 GSa/s Digitizer User’s Guide 7

Contents

Safety Summary 3

Instrument Markings 5

Compliance and Environmental Information 6

1 Introduction

M8131A Overview 17

Key Features 17

Feature Options 18

Instrument Options 18

Front Panel 18

Related Documents 21

Additional Documents 22

2 M8131A Software Installation

Pre-Requisites 24

Installation Process 25

Post Installation Steps 35

How to use M8131A Instrument 37

M8131A Maintenance 38

ESD Protection 38

Power and Ventilation Requirements 40

Thermal Protection 40

Battery 40

Operating Environment 40

8Keysight M8131A 16/32 GSa/s Digitizer User’s Guide

Contents

3 M8131A Soft Front Panel

Launching the M8131A Soft Front Panel 42

Command Line Arguments 45

Communication 46

M8131A Soft Front Panel 48

Title Bar 49

Menu Bar 49

Tool Bar 54

Lower Pane 55

Errors List Window 56

Status Bar 57

Parameters Window 57

Trace Window 59

Acquisition Tab 62

Trigger Tab 65

Clock Tab 67

Configurations Tab 68

IOs Tab 69

System Monitor Tab 71

Working with M8131A Front Panel 72

Numeric Control Usage 72

Window Controls Usage 73

Calibration Manager 74

Exporting Waveforms 78

Integrating 89600 VSA with M8131A 79

Keysight M8131A 16/32 GSa/s Digitizer User’s Guide 9

Contents

4 Remote Programming

Remote Programming Overview 84

Instructions 84

Instruction Header 84

White Space (Separator) 84

Braces 85

Ellipsis 85

Square Brackets 85

Program Data 85

Status Commands 86

STATus:PRESet 88

Status Byte Register 88

Questionable Data Register Command Subsystem 89

Operation Status Subsystem 90

Reference Clock Status Subsystem 91

Connection Status Subsystem 91

ADC Calibration Status Subsystem 92

Filter Status Subsystem 93

Sample Clock Status Subsystem 94

ADC Calibration Run Status Subsystem 95

Arm Status Subsystem 96

Trigger Status Subsystem 96

Memory Capture Status Subsystem 97

Data Streaming Status Subsystem 97

Acquire Commands 98

:ACQuire: SRATe[?] 98

:ACQuire:POINts[?] 98

10 Keysight M8131A 16/32 GSa/s Digitizer User’s Guide

Contents

ADC Calibration Commands 100

:CALibrate:ADC[:STARt] 100

:CALibrate:ADC:NEXT 100

:CALibrate:ADC:ABORt 100

:CALibrate:ADC:INFormation? 101

:CALibrate:ADC:RECommended? 101

:CALibrate:ADC:DATE[:RECommended]? 101

:CALibrate:ADC:TEMPerature:DELTa[:CURRent]? 102

:CALibrate:ADC:TEMPerature:DELTa:MAXimum? 102

:CALibrate:ADC:TEMPerature:DELTa:MINimum? 102

:CALibrate:ADC:SAVE 103

:CALibrate:ADC:LOAD 103

Latency Calibration Commands 104

:CALibrate:SYNC:INPut:LEVel 104

:CALibrate:LATency:LCMPeriod 104

:CALibrate:LATency:MODE 104

:CALibrate:LATency[:STEP] 105

Channel Commands 106

:CHANnel<N>:DISPlay 106

:CHANnel<N>:OFFSet 106

:CHANnel<N>:RANGe 107

:CHANnel<N>:DPRocessing:DDC:CFRequency 107

:CHANnel<N>:DPRocessing: CHARacteris[:VALue] 108

:CHANnel<N>:DPRocessing:FILTer[:VALue] 108

:CHANnel<N>:DPRocessing:FILTer:DEFault 109

:CHANnel<N>:DPRocessing:FILTer:SCALe 110

:CHANnel<N>:DPRocessing:FILTer:STATe 110

Data Processing Commands 111

:DPRocessing[:MODE] 111

:DPRocessing:DDC:DECimation 111

:DPRocessing:DIRect:DECimation 112

Autres manuels pour M8131A

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies 34980A Manuel utilisateur

Keysight Technologies

Keysight Technologies UXA Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N9020B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies PNA-L N5230A Manuel utilisateur

Keysight Technologies

Keysight Technologies U2020 X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies M9710A Guide rapide

Keysight Technologies

Keysight Technologies B1505A Manuel utilisateur

Keysight Technologies

Keysight Technologies E5080B Manuel utilisateur

Keysight Technologies

Keysight Technologies N9000A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies N437 Series Instructions d'installation et d'utilisation

Keysight Technologies

Keysight Technologies U1732C Manuel utilisateur

Keysight Technologies

Keysight Technologies N5511A-K26 Manuel utilisateur

Keysight Technologies

Keysight Technologies EXA N9010B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies E4980A Manuel utilisateur

Keysight Technologies

Keysight Technologies W3301A Manuel utilisateur

Keysight Technologies

Keysight Technologies 5061B Manuel utilisateur

Keysight Technologies

Keysight Technologies FieldFox N9927-90002 Manuel utilisateur

Keysight Technologies

Keysight Technologies Option 503 Manuel utilisateur

Keysight Technologies

Keysight Technologies N5244BU-679 Manuel utilisateur

Keysight Technologies

Keysight Technologies M9393A Mode d'emploi

Keysight Technologies

Keysight Technologies P50 B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N2893A Manuel utilisateur

Keysight Technologies

Keysight Technologies N9040B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies X Series Guide de démarrage rapide

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur