Keysight Technologies PXA N9030A Manuel utilisateur

Getting Started

Guide

Keysight X-Series Signal Analyzers

This manual provides documentation for the following Analyzers:

PXA Signal Analyzer N9030A MXA Signal Analyzer N9020A

EXA Signal Analyzer N9010A CXA Signal Analyzer N9000A

Notice: This document contains references to Agilent.

Please note that Agilent’s Test and Measurement

business has become Keysight Technologies. For

more information, go to www.keysight.com.

Notices

2008-2015

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Bluetooth® and the Bluetooth

Logo® are trademarks owned by

Bluetooth SIG, Inc., U.S.A. and

licensed to Keysight Technologies,

Inc

WiMAX™, WiMAX Forum ®, the

WiMAX Forum Logo, Mobile

WiMAX™, WiMAX Forum

Certified™, the WiMAX Forum

Certified Logo, and Fixed WiMAX™

are US trademarks of the WiMAX

Forum.

Manual Part Number

N9020-90246

Edition

Second Edition, June 2015

Supersedes: December 2014

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO THE

MAXIMUM EXTENT PERMITTED BY

APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND ANY

INFORMATION CONTAINED HEREIN,

INCLUDING BUT NOT LIMITED TO THE

IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS

OR FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS DOCUMENT

OR ANY INFORMATION CONTAINED

HEREIN. SHOULD KEYSIGHT AND THE

USER HAVE A SEPARATE WRITTEN

AGREEMENT WITH WARRANTY

TERMS COVERING THE MATERIAL IN

THIS DOCUMENT THAT CONFLICT

WITH THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance with

the terms of such license.

U.S. Government Rights

The Software is “commercial computer

software,” as defined by Federal

Acquisition Regulation (“FAR”) 2.101.

Pursuant to FAR 12.212 and 27.405-3

and Department of Defense FAR

Supplement (“DFARS”) 227.7202, the

U.S. government acquires commercial

computer software under the same

terms by which the software is

customarily provided to the public.

Accordingly, Keysight provides the

Software to U.S. government

customers under its standard

commercial license, which is embodied

in its End User License Agreement

(EULA), a copy of which can be found at

http://www.keysight.com/find/sweula.

The license set forth in the EULA

represents the exclusive authority by

which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license set

forth therein, does not require or

permit, among other things, that

Keysight: (1) Furnish technical

information related to commercial

computer software or commercial

computer software documentation that

is not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the government

rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release,

perform, display, or disclose

commercial computer software or

commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall apply,

except to the extent that those terms,

rights, or licenses are explicitly required

from all providers of commercial

computer software pursuant to the FAR

and the DFARS and are set forth

specifically in writing elsewhere in the

EULA. Keysight shall be under no

obligation to update, revise or

otherwise modify the Software. With

respect to any technical data as defined

by FAR 2.101, pursuant to FAR 12.211

and 27.404.2 and DFARS 227.7102, the

U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Safety Notices

CAUTION

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in damage to the product

or loss of important data. Do not

proceed beyond a CAUTION notice

until the indicated conditions are fully

understood and met.

WARNING

A WARNING notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that, if

not correctly performed or adhered to,

could result in personal injury or death.

Do not proceed beyond a WARNING

notice until the indicated conditions are

fully understood and met.

In This Guide…

This guide contains the following information:

1 Quick-Start

This chapter explains how to initialize the signal analyzer and view a signal.

2 Front and Rear Panel Features

Refer to this chapter for information on front- and rear-panel key functionality, and display annotations.

3 Instrument Operating System

This chapter describes the Microsoft Windows 7 configuration and the settings used with the Keysight instrument

software.

4 Using Windows Tools

The information in this chapter provides some guidelines for using the Microsoft Windows 7 feature

capabilities with the signal analyzer.

5 Troubleshooting

This chapter details some basic steps that may solve any problems you are experiencing with either the

signal analyzer or Microsoft Windows 7.

Where to Find the Latest Information

Documentation is updated periodically. For the latest information about these products, including instrument software

upgrades, application information, and product information, browse to one of the following URLs, according to the

name of your product:

http://www.keysight.com/find/pxa

http://www.keysight.com/find/mxa

http://www.keysight.com/find/exa

http://www.keysight.com/find/cxa

http://www.keysight.com/find/mxe

To receive the latest updates by email, subscribe to Keysight Email Updates at the following URL:

http://www.keysight.com/find/MyKeysight

Information on preventing analyzer damage can be found at:

www.keysight.com/find/PreventingInstrumentRepair

Is your product software up-to-date?

Periodically, Keysight releases software updates to fix known defects and incorporate product enhancements. To search

for software updates for your product, go to the Keysight Technical Support website at:

http://www.keysight.com/find/techsupport

Contents

Table of Contents

1 Quick Start

Initial Inspection 10

Verify the Contents 10

Shipping Problems? 10

Instrument Location and Rack Mounting Requirements 11

Locating the analyzer 11

Cooling and rack mounting 11

Turning on the Analyzer the First Time 12

Initializing the analyzer using a USB mouse 12

Initializing the analyzer using front-panel navigation 16

Anti-Virus Software and Firewalls 19

Shortening the Instrument Power-On Time 20

Instrument Information 21

Power requirements 21

Protecting Against Overpowering 22

Instrument Maintenance 22

Protecting against electrostatic discharge 24

2 Front and Rear Panel Features

Front-Panel Features 26

Overview of key types 29

Display Annotations 34

Rear-Panel Features 36

Front and Rear Panel Symbols 40

3 Instrument Operating System

Microsoft Windows 44

Windows Help and Support Center 44

Installed Software 45

Signal analyzer software 45

Contents

VSA 89601B 45

Pulse Measurement N9051B 45

Customer installation of software 46

3rd Party Software verified by Keysight 46

Installation of other 3rd Party Software 46

User Accounts 47

Administrator account 47

Instrument accounts 47

Power Users accounts 47

KeysightOnly user account 48

Service user accounts 48

Customer creation of accounts 48

Keysight X-Series Analyzer Licensing Options 49

Licensing New Measurement Application Software -

After Initial Purchase 51

Installation procedure over USB 51

Transporting a License Between X-Series Analyzers 53

Firewall configuration for transporting licenses via LAN 56

Windows Configuration 57

Settings that can be changed 57

Settings that must not be changed 58

Autoplay/Autorun 60

Configuring Printers 61

Configuring LAN 62

Hostname 62

IP Address & Gateway 62

Connecting to a Network Shared Folder 63

Windows Security 64

Windows Firewall 64

Automatic Updates 64

Virus Protection 65

Contents

Spyware Protection 65

System Maintenance 66

Backup 66

System Restore 66

Disk Defragmenting 66

USB Connections 67

Disk Drive Partitioning and Use 68

Backing-up the factory calibration data 68

Disk Drive Recovery Process 70

Updating the software 72

4 Using Windows Tools

Navigating Windows Without a Mouse 76

Remote Desktop: Using the X-Series Signal Analyzers Remotely 80

Overview of Remote Desktop operation 80

Setting up Remote Desktop operation 80

How to locate the computer name of the instrument 82

Running a Remote Desktop session 83

The Virtual Front Panel 93

Embedded Web Server: Using the X-Series Signal Analyzers Remotely 95

Accessing the instrument through the Internet 95

Accessing the Web Control SA tab 99

Selecting the Get Data tab 100

Selecting the Get Image tab 102

Selecting the SCPI Telnet tab 103

Selecting the Help tab 104

Capturing/Printing Displays and Windows 105

Windows Shortcuts and Miscellaneous Tasks 106

Windows shortcuts (key combinations) 106

Windows taskbar auto-hide feature 108

5 Troubleshooting

Contents

Check the Basics 110

Problems with Microsoft Windows 7 112

Returning an Analyzer for Service 113

Calling Keysight Technologies 113

Locations for Keysight Technologies 114

Read the Warranty 115

Service Options 115

Packaging the Instrument 116

Keysight X-Series Signal Analyzers

PXA N9030A, MXA N9020A, EXA N9010A, and CXA N9000A

Getting Started Guide

1 Quick Start

This section explains how to initialize the Signal Analyzer and view a signal.

The following topics can be found in this section:

“Initial Inspection” on page 10

“Instrument Location and Rack Mounting Requirements” on page 11

“Turning on the Analyzer the First Time” on page 12

“Anti-Virus Software and Firewalls” on page 19

“Shortening the Instrument Power-On Time” on page 20

“Instrument Information” on page 21

Quick Start

Initial Inspection

Inspect the shipping container and the cushioning material for signs of stress.

Retain the shipping materials for future use, as you may wish to ship the

analyzer to another location or to Keysight Technologies for service.

Verify the Contents

Verify the shipping container contents using the box contents list.

Shipping Problems?

If the shipping materials are damaged or the contents of the container are

incomplete:

— Contact the nearest Keysight Technologies office.

— Keep the shipping materials for the carrier’s inspection.

— If you must return an analyzer to Keysight Technologies, use the original (or

comparable) shipping materials. See “Returning an Analyzer for Service”

on page 113.

Autres manuels pour PXA N9030A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Keysight Technologies Instrument de mesure

Keysight Technologies

Keysight Technologies BT2152B Manuel de service

Keysight Technologies

Keysight Technologies U5309A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies B2900A Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9030A Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies U5855A Manuel utilisateur

Keysight Technologies

Keysight Technologies E5061B Manuel utilisateur

Keysight Technologies

Keysight Technologies M981 AS Series Manuel utilisateur

Keysight Technologies

Keysight Technologies N9320A RF Manuel utilisateur

Keysight Technologies

Keysight Technologies N5221A Manuel utilisateur

Keysight Technologies

Keysight Technologies B2900B Series Manuel utilisateur

Keysight Technologies

Keysight Technologies 34972A Manuel utilisateur

Keysight Technologies

Keysight Technologies UXA N9040B Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies UXA N9040B Manuel utilisateur

Keysight Technologies

Keysight Technologies N1913PM5B Guide de démarrage rapide

Keysight Technologies

Keysight Technologies E5052B Manuel du propriétaire

Keysight Technologies

Keysight Technologies B1507A Manuel utilisateur

Keysight Technologies

Keysight Technologies U2020 X Series Manuel utilisateur

Keysight Technologies

Keysight Technologies U5303A Guide de l'utilisateur

Keysight Technologies

Keysight Technologies N5245-60106 Manuel d'installation et d'exploitation

Keysight Technologies

Keysight Technologies 86120D Manuel utilisateur

Keysight Technologies

Keysight Technologies N9029AV01-V15 Manuel utilisateur

Keysight Technologies

Keysight Technologies E5260 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies CX3300 Series Manuel utilisateur

Keysight Technologies

Keysight Technologies X Series Manuel d'installation et d'exploitation

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur