Johnson 40-6616 Manuel utilisateur

Tiling/Flooring Laser Level

Model No. 40-6616

Instruction Manual

Congratulations on your choice of this Tiling/Flooring Laser Level. We

suggest you read this instruction manual thoroughly before using the

instrument. Save this instruction manual for future use.

This is a Class IIIa laser tool and is manufactured to comply

with CFR 21, parts 1040.10 and 1040.11 as well as international

safety rule IEC 285.

3626H_Manuals 6/17/10 11:43 AM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety Instructions

4. ocation/Content

of Warning abels

5. ocation of Parts/Components

6. Operating Instructions

7. Using the Product

8. Technical Specifications

9. Care and Handling

10. Product Warranty

11. Warranty Registration

12. Accessories

1. Kit Contents

Description ty.

Tiling/Flooring aser evel 1

“AA” Alkaline Batteries 2

Floor Target 1

Instruction Manual with Warranty Card 1

Soft-sided Pouch 1

2. Features and Functions

This simple-to-use tool allows you to generate two lines on the

floor at 90º angles for surface layout including tile, stone, brick,

carpet and hardwood flooring. Unlike lines drawn from chalk, the

40-6616 projects two laser beams over wet mastic or concrete.

Angles are easily established with the built-in protractor.

3626H_Manuals 6/17/10 11:43 AM Page 2

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class IIIa aser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS TOOL EMITS LASER RADIATION.

DO NOT STARE INTO BEAM.

AVOID DIRECT EYE EXPOSURE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. If unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

3626H_Manuals 6/17/10 11:43 AM Page 3

4. Location/Content of Warning Labels

3626H_Manuals 6/17/10 11:43 AM Page 4

5. Location of Part/Components

Metric Scale

Bubble Vial

Power Button

Power ED

aser Output

Windows

English Scale Bubble Vial

Angle

Scale

Battery Cover

3626H_Manuals 6/17/10 11:43 AM Page 5

6. Operating Instructions

IMPORTANT: It is the responsibility of the user to verify the

calibration of the instrument before each use.

Battery Installation

As shown in figure, remove the battery

door and put two “AA” alkaline batteries

into the battery compartment according to

the polarity indicated. Snap the battery

cover back into place.

Note: Used (discharged) batteries are

hazardous waste and should be

disposed of properly.

7. Using the Product

Press the power button. Position the laser so that it’s appropriate for

your application needs. If necessary, align the laser beam(s) with a

reference point(s). The freestanding target increases the beams’

visibility. Use the laser beams as line references.

3626H_Manuals 6/17/10 11:43 AM Page 6

Establishing Common Angles

1. Mark the point on the floor where the laser beams would

intersect (point A).

2. Using the angle scale as a guide, mark the point on the

floor that corresponds to the angle you want to establish

(point B).

3. Rotate the laser so that the 0º angle scale is on point B.

Make sure that the laser beams still intersect at point A.

Increasing the Beams’ Visibility

The laser beams’ visibility can be increased when working in really

bright conditions, such as working near window openings or

outside walls.

1. Work toward the laser.

2. Use the target.

3. Use laser glasses (not included).

Checking Precision Angles Installing Tile

Squaring Walls

3626H_Manuals 6/17/10 11:43 AM Page 7

8. Technical Specifications

aser Wavelength 635nm ± 10

aser Classification Class IIIa

Maximum Power Output ≤5mW

Accuracy ± 1/4"/60 ft. (±4mm/m)

Interior Range Up to 30 ft. (9m)

depending upon light conditions

Power Supply 2 “AA” alkaline batteries (included)

Battery ife Approx. battery life 30 hours

continuous use

Dimensions 6 1/8" x 6 1/8" x 1 15/16"

(155 x 155 x 50mm)

Weight 0.55 lbs. (0.25 Kg)

Working Temperature 14°F to 113°F (-10°C to +45°C)

3626H_Manuals 6/17/10 11:43 AM Page 8

9. Care and Handling

• This laser unit is a precision tool that must be handled with care.

• Avoid exposing unit to shock vibrations and extreme temperatures.

• Before moving or transporting the unit, make sure that the unit is turned off.

• Remove the batteries when storing the unit for an extended time (more than

three months) to avoid damage to the unit should the batteries deteriorate.

• Always store the unit in its case when not in use.

• Avoid getting the unit wet.

• Keep the laser unit dry and clean, especially the laser output window.

Remove any moisture or dirt with a soft, dry cloth.

• Do not use harsh chemicals, strong detergents or cleaning solvents to clean

the laser unit.

10. Product Warranty

Johnson evel & Tool offers a three year limited warranty on each of its products.

You can obtain a copy of the limited warranty for a Johnson evel & Tool

product by contacting Johnson evel & Tool's Customer Service Department,

as provided below, or by visiting our web site at www.johnsonlevel.com. The

limited warranty for each product contains various limitations and exclusions.

Do not return this product to the store/retailer or place of purchase.

Non-warranty repairs and course calibration must be done by an authorized

Johnson®service center or Johnson evel & Tool's limited warranty, if

applicable, will be void and there will be NO WARRANTY. Contact one of our

service centers for all non-warranty repairs. A list of service centers can be

found on our web site at www.johnsonlevel.com or by calling our Customer

Service Department. Contact our Customer Service Department for Return

Material Authorization (RMA) for warranty repairs (manufacturing defects

only). Proof of purchase is required.

3626H_Manuals 6/17/10 11:43 AM Page 9

NOTE: The user is responsible for the proper use and care of the product. It is the

responsibility of the user to verify the calibration of the instrument before each use.

For further assistance, or if you experience problems with this product that are not

addressed in this instruction manual, please contact our Customer Service Dept.

In the U.S., contact Johnson evel & Tool’s Customer Service Department at

888-9- EVE S.

In Canada, contact Johnson evel & Tool’s Customer Service Department at

800-346-6682.

11. Warranty Registration

Enclosed with this instruction manual you will find a warranty

registration card to be completed for your product. You will need to

locate the serial number for your product that is located on the bottom

of the unit. PLEASE NOTE THAT IN ADDITION TO ANY OTHER

LIMITATIONS OR CONDITIONS OF JOHNSON LEVEL & TOOL'S

LIMITED WARRANTY, JOHNSON LEVEL & TOOL MUST HAVE

RECEIVED YOUR PROPERLY COMPLETED WARRANTY CARD AND

PROOF OF PURCHASE WITHIN 30 DAYS OF YOUR PURCHASE OF

THE PRODUCT OR ANY LIMITED WARRANTY THAT MAY APPLY

SHALL NOT APPLY AND THERE SHALL BE NO WARRANTY.

3626H_Manuals 6/17/10 11:43 AM Page 10

Table des matières

Autres manuels Johnson Niveau laser

Johnson

Johnson 40-6250 Instructions d'utilisation et d'entretien

Johnson

Johnson 40-6674 Manuel utilisateur

Johnson

Johnson 40-0918 Manuel utilisateur

Johnson

Johnson 40-6028 Manuel utilisateur

Johnson

Johnson 1760-2400 Manuel utilisateur

Johnson

Johnson 40-6551 Manuel utilisateur

Johnson

Johnson 40-6683 Manuel utilisateur

Johnson

Johnson 40-6636 Manuel utilisateur

Johnson

Johnson 40-6532 Manuel utilisateur

Johnson

Johnson 40-6060 Manuel utilisateur

Johnson

Johnson 40-6641 Manuel utilisateur

Johnson

Johnson 40-6692 Manuel utilisateur

Johnson

Johnson HOT SHOT 9105/40-0910 Manuel utilisateur

Johnson

Johnson 40-0915 Manuel utilisateur

Johnson

Johnson 40-6060 Manuel utilisateur

Johnson

Johnson 40-6690 Manuel utilisateur

Johnson

Johnson 9100 Manuel utilisateur

Johnson

Johnson 40-6690 Manuel utilisateur

Johnson

Johnson 40-6647 Manuel utilisateur

Johnson

Johnson 40-6060 Manuel utilisateur

Johnson

Johnson 1880-2400 Manuel utilisateur

Johnson

Johnson 40-6515 Manuel utilisateur

Johnson

Johnson 40-6650 Manuel utilisateur

Johnson

Johnson 40-6646 Manuel utilisateur

Manuels Niveau laser populaires d'autres marques

Nedo

Nedo ET-5 Manuel utilisateur

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuel utilisateur

LaserLiner

LaserLiner X2-Laser Manuel utilisateur

Spectra

Spectra LL300N Manuel utilisateur

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuel utilisateur

Nedo

Nedo Crossliner 4 Manuel utilisateur

Lasertec

Lasertec FX360G Manuel utilisateur

Flex

Flex ALC 8 Manuel utilisateur

Black & Decker

Black & Decker LZR5 Manuel utilisateur

Cocraft

Cocraft HL 20-SG Manuel utilisateur

Zircon

Zircon iLine Manuel utilisateur

HWH

HWH 310 SERIES Manuel utilisateur

Leica

Leica iCON robot 60 Manuel utilisateur

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuel utilisateur

LaserLiner

LaserLiner ActiveFinder XP Manuel utilisateur

DeWalt

DeWalt DW082 Manuel utilisateur

imex

imex EL20 Manuel utilisateur

Fixturlaser

Fixturlaser NXA D I-0912 Manuel utilisateur