Intel CORE 2 DUO MOBILE - THERMAL DESIGN GUIDE... Mode d’emploi

Order Number: 320028-001

Intel® Core™ 2 Duo Mobile

Processors on 45-nm process for

Embedded Applications

Thermal Design Guide

June 2008

Intel® Core™ 2 Duo Mobile Processors on 45-nm process for Embedded Applications

TDG June 2008

2Order Number: 320028-001

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. EXCEPT AS PROVIDED IN INTEL’S TERMS AND

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY RELATING TO SALE AND/OR USE OF INTEL PRODUCTS, INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR

PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY RIGHT.

Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the

presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel

or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights.

Intel products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.

Intel may make changes to specifications and product descriptions at any time, without notice.

Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for

future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.

The Intel® Core™ 2 Duo Mobile Processors on 45-nm process for Embedded Applications may contain design defects or errors known as errata which

may cause the product to deviate from published specifications. Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling

1-800-548-4725 or by visiting Intel's website at http://www.intel.com.

AnyPoint, AppChoice, BoardWatch, BunnyPeople, CablePort, Celeron, Chips, CT Media, Dialogic, DM3, EtherExpress, ETOX, FlashFile, i386, i486, i960,

iCOMP, InstantIP, Intel, Intel Centrino, Intel logo, Intel386, Intel486, Intel740, IntelDX2, IntelDX4, IntelSX2, Intel Create & Share, Intel GigaBlade, Intel

InBusiness, Intel Inside, Intel Inside logo, Intel NetBurst, Intel NetMerge, Intel NetStructure, Intel Play, Intel Play logo, Intel SingleDriver, Intel

SpeedStep, Intel StrataFlash, Intel TeamStation, Intel Xeon, Intel XScale, IPLink, Itanium, MCS, MMX, MMX logo, Optimizer logo, OverDrive, Paragon, PC

Dads, PC Parents, PDCharm, Pentium, Pentium II Xeon, Pentium III Xeon, Performance at Your Command, RemoteExpress, SmartDie, Solutions960,

Sound Mark, StorageExpress, The Computer Inside., The Journey Inside, TokenExpress, VoiceBrick, VTune, and Xircom are trademarks or registered

trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

*Other names and brands may be claimed as the property of others.

Core™ 2 Duo Mobile Processors—Contents

Intel® Core™ 2 Duo Mobile Processors on 45-nm process-Thermal Design Guide

TDG June 2008

3Order Number: 320028-001

Contents

1.0 Introduction ............................................................................................................. 6

1.1 Design Flow ....................................................................................................... 6

1.2 Definition of Terms ............................................................................................. 7

1.3 Reference Documents.......................................................................................... 8

1.4 Thermal Design Tool Availability ........................................................................... 8

2.0 Package Information ................................................................................................ 9

3.0 Thermal Specifications.............................................................................................10

3.1 Thermal Design Power........................................................................................10

3.2 Maximum Allowed Component Temperature ..........................................................10

4.0 Mechanical Specifications ........................................................................................11

4.1 Package Mechanical Requirements .......................................................................11

4.1.1 Die Pressure/Load Upper Limit..................................................................11

4.1.2 Die Pressure/Load Lower Limit..................................................................11

4.2 Package Keep Out Zones Requirements ................................................................11

4.3 Board Level Keep Out Zone Requirements.............................................................11

5.0 Thermal Solution Requirements...............................................................................15

5.1 Thermal Solution Characterization........................................................................15

5.1.1 Calculating the Required Thermal Performance for the Intel®Core™2 Duo

processor ..............................................................................................16

6.0 Reference Thermal Solutions ...................................................................................18

6.1 ATCA Reference Thermal Solution ........................................................................18

6.2 Keep Out Zone Requirements..............................................................................19

6.3 Thermal Performance.........................................................................................19

6.4 1U+ Reference Heatsink.....................................................................................19

6.4.1 Keep Out Zone Requirements...................................................................20

6.4.2 Thermal Performance..............................................................................20

6.5 Compact PCI Reference Heatsink .........................................................................21

6.5.1 Keep Out Zone Requirements...................................................................22

6.5.2 Thermal Performance..............................................................................22

6.6 Heatsink Fastener Assembly................................................................................22

6.7 Thermal Interface Material (TIM) .........................................................................22

6.8 Heatsink Orientation ..........................................................................................23

7.0 Thermal Metrology...................................................................................................24

7.1 Die Temperature Measurements ..........................................................................24

7.2 Power Simulation Software .................................................................................24

7.3 Additional Thermal Features................................................................................24

7.4 Local Ambient Temperature Measurement Guidelines..............................................24

7.4.1 Active Heatsink Measurements .................................................................25

7.4.2 Passive Heatsink Measurements................................................................25

8.0 Reliability Guidelines ...............................................................................................28

A Thermal Solution Component Suppliers....................................................................29

B Mechanical Drawings ...............................................................................................30

Intel® Core™ 2 Duo Mobile Processors on 45-nm process for Embedded Applications

June 2008 TDG

Order Number: 320028-001 4

Figures—Core™ 2 Duo Mobile Processors

Figures

1 Thermal Design Process..............................................................................................7

2 Primary Side Keep Out Zone Requirements— Micro-FCPGA............................................12

3 Primary Side Keep Out Zone Requirements— Micro-FCBGA............................................13

4 Secondary Side Keep Out Zone Requirements..............................................................14

5 Processor Thermal Characterization Parameter Relationships .........................................16

6 AdvancedTCA* Reference Heatsink Assembly...............................................................18

7 AdvancedTCA* Heatsink Thermal Performance vs. Volumetric Airflow Rate ......................19

8 1U Reference Heatsink Assembly ...............................................................................20

9 1U Heatsink Thermal Performance vs. Volumetric Airflow Rate .......................................21

10 CompactPCI Reference Heatsink Assembly ..................................................................21

11 cPCI Reference Heatsink Thermal Performance vs. Volumetric Flow Rate .........................22

12 Heatsink Orientation Relative to Airflow Direction .........................................................23

13 Measuring TLA with an Active Heatsink .......................................................................26

14 Measuring TLA with a Passive Heatsink .......................................................................27

15 AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2)........ 31

16 AdvancedTCA* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2)........ 32

17 AdvancedTCA* Reference Heatsink Assembly...............................................................33

18 AdvancedTCA* Reference Heatsink.............................................................................34

19 CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 1 of 2).......... 35

20 CompactPCI* Reference Heatsink PCB Keep Out Zone Requirements (Sheet 2 of 2).......... 36

21 CompactPCI* Reference Heatsink Assembly.................................................................37

22 CompactPCI* Reference Heatsink...............................................................................38

23 1U Reference Heatsink PCB Keep Out Requirements (Sheet 1 of 2).................................39

24 1U Reference Heatsink PCB Keep Out Requirements (Sheet 2 of 2).................................40

25 1U Reference Heatsink Assembly ...............................................................................41

26 1U Reference Heatsink..............................................................................................42

Tables

1 Definition of Terms.....................................................................................................7

2 Thermal Specifications for the Intel®Core™2 Duo processor..........................................10

3 Required Heatsink Thermal Performance (ΨJA).............................................................17

4 Reliability Requirements............................................................................................28

5 Reference Heatsink ..................................................................................................29

6 Mechanical Drawings ................................................................................................30

Core™ 2 Duo Mobile Processors—Tables

Intel® Core™ 2 Duo Mobile Processors on 45-nm process-Thermal Design Guide

TDG June 2008

5Order Number: 320028-001

Revision History

Date Revision Description

June 2008 1.0 First Public release.

Intel® Core™ 2 Duo Mobile Processors on 45-nm process for Embedded Applications

June 2008 TDG

Order Number: 320028-001 6

Introduction—Core™ 2 Duo Mobile Processors

1.0 Introduction

The power dissipation of electronic components has risen along with the increase in complexity of

computer systems. To ensure quality, reliability, and performance goals are met over the product’s life

cycle, the heat generated by the device must be properly dissipated. Typical methods to improve heat

dissipation include selective use of airflow ducting, and/or the use of heatsinks.

The goals of this document are to:

• Identify the thermal and mechanical specification for the device.

• Describe a reference thermal solution that meets the specifications.

A properly designed thermal solution will adequately cool the device at or below the thermal

specification. This is accomplished by providing a suitable local-ambient temperature, ensuring

adequate local airflow, and minimizing the die to local-ambient thermal resistance. Operation outside

the functional limits can degrade system performance and may cause permanent changes in the

operating characteristics of the component.

This document describes thermal design guidelines for the Intel® Core™ 2 Duo Mobile Processors on

45-nm process for Embedded Applications in the micro Flip Chip Pin Grid Array (micro-FCPGA)

package and the micro Flip Chip Ball Grid Array (micro-FCBGA) package. The information provided in

this document is for reference only and additional validation must be performed prior to implementing

the designs into final production. The intent of this document is to assist each original equipment

manufacturer (OEM) with the development of thermal solutions for their individual designs. The final

heatsink solution, including the heatsink, attachment method, and thermal interface material (TIM)

must comply with the mechanical design, environmental, and reliability requirements delineated in

the processor datasheet. It is the responsibility of each OEM to validate the thermal solution design

with their specific applications.

This document addresses thermal and mechanical design specifications for the Intel Core 2 Duo

processor only. For thermal design information on other Intel components, refer to the respective

component datasheets.

1.1 Design Flow

Several tools are available from Intel to assist with the development of a reliable, cost-effective

thermal solution. Figure 1 illustrates a typical thermal solution design process with available tools

noted. The tools are available through your local Intel field sales representative.

Core™ 2 Duo Mobile Processors—Introduction

Intel® Core™ 2 Duo Mobile Processors on 45-nm process-Thermal Design Guide

TDG June 2008

7Order Number: 320028-001

1.2 Definition of Terms

Figure 1. Thermal Design Process

Table 1. Definition of Terms (Sheet 1 of 2)

Term Definition

FCPGA Flip Chip Pin Grid Array. A pin grid array packaging technology where the die is

exposed on the package substrate.

FCBGA Flip Chip Ball Grid Array. A ball grid array packaging technology where the die is

exposed on the package substrate.

TJUNCTION-MAX Maximum allowed component (junction) temperature. Also referred to as TJ-MAX

TDP Thermal Design Power. Thermal solutions should be designed to dissipate this

target power level.

TLA Local ambient temperature. This is the temperature measured inside the chassis,

approximately 1 inch upstream of a component heatsink. Also referred to as TA.

ΨJA Junction-to-ambient thermal characterization parameter. A measure of heatsink

thermal performance using the total package power. Defined as (TJUNCTION – TLA) /

Total Package Power

ΨTIM Thermal interface material thermal characterization parameter. A measure of

thermal interface material performance using total package power. Defined as (T

CASE – T JUNCTION)/ Total Package Power. Also referred to as ΨJS.

ΨSA Sink-to-ambient thermal characterization parameter. A measure of heatsink

thermal performance using total package power. Defined as (T SINK – T JUNCTION)/

Total Package Power.

°C Degrees in Celsius

CFM Volumetric airflow rate in cubic feet per minute

in. Inches

LFM Airflow velocity in linear feet per minute

PCB Printed circuit board

TSINK Heatsink temperature measured on the underside of the heatsink base.

•Package Level Thermal Models

•Thermal Model User’s Guide

Step 1: Thermal Simulation

•Reference Heatsinks

•Reference Mounting Hardware

•Vendor Contacts

Step 2: Heatsink Design

and Selection

Step 3: Thermal Validation

•Thermal Testing Software

•Thermal Test Vehicle

•User Guides

Intel® Core™ 2 Duo Mobile Processors on 45-nm process for Embedded Applications

June 2008 TDG

Order Number: 320028-001 8

Introduction—Core™ 2 Duo Mobile Processors

1.3 Reference Documents

The reader of this specification should also be familiar with material and concepts presented in the

following documents:

• Intel® Core™2 Duo Processor for Intel® Centrino® Duo Mobile Technology Datasheet

Documents are located at developer.intel.com. Contact your Intel field sales representative for

additional information.

1.4 Thermal Design Tool Availability

Intel provides thermal simulation models of the device and a thermal model user’s guide to aid

system designers in simulating, analyzing, and optimizing thermal solutions in an integrated, system-

level environment. The models are for use with commercially available Computational Fluid Dynamics

(CFD)-based thermal analysis tools including Flotherm* (version 7.1 or higher) by Flomerics, Inc. or

Icepak* by Fluent, Inc. Contact your Intel representative to order the thermal models and associated

user’s guides.

TIM Thermal Interface Material – the thermally conductive compound between the

heatsink and die. This material fills air gaps and voids, and enhances spreading of

the heat from the die to the heatsink.

UA unit of measure used to define server rack spacing height. 1U is equal to 1.75

inches, 2U equals 3.50 inches, etc.

WWatt

Table 1. Definition of Terms (Sheet 2 of 2)

Term Definition

Core™ 2 Duo Mobile Processors—Package Information

Intel® Core™ 2 Duo Mobile Processors on 45-nm process-Thermal Design Guide

TDG June 2008

9Order Number: 320028-001

2.0 Package Information

The Intel® Core™2 Duo Processor (XE and SV) is available in 478-pin Micro-FCPGA packages as well

as 479-ball Micro-FCBGA packages. The Intel® Core™2 Duo Processor SFF processor (LV and ULV) is

available in 956-ball Micro-FCBGA packages. The package mechanical dimensions can be found in the

product’s datasheet.

The Micro-FCBGA package incorporates land-side capacitors. The land-side capacitors are electrically

conductive. Care should be taken to prevent the capacitors from contacting any other electrically

conductive materials. Doing so may short the capacitors and possibly damage the device or render it

inactive.

The processor package has mechanical load limits that are specified in the processor datasheet. These

load limits should not be exceeded during heatsink installation, removal, mechanical stress testing, or

standard shipping conditions. The heatsink mass can also add additional dynamic compressive load to

the package during a mechanical shock event. Amplification factors due to the impact force during

shock must be taken into account in dynamic load calculations. The total combination of dynamic and

static compressive load should not then exceed the processor datasheet compressive dynamic load

specification during a vertical shock. It is not recommended to use any portion of the processor

substrate as a mechanical reference or load bearing surface in either static or dynamic compressive

load conditions.

Intel® Core™ 2 Duo Mobile Processors on 45-nm process for Embedded Applications

June 2008 TDG

Order Number: 320028-001 10

Thermal Specifications—Core™ 2 Duo Mobile Processors

3.0 Thermal Specifications

3.1 Thermal Design Power

The Thermal Design Power (TDP) specification is listed in Table 2. Heat transfer through the micro-

FCBGA, micro-FCPGA package and socket via the base board is negligible. The cooling capacity

without a thermal solution is also minimal, so Intel requires the use of a heatsink for all usage

conditions.

3.2 Maximum Allowed Component Temperature

The device must maintain a maximum temperature at or below the value specified in Table 2. The

thermal solution is required to meet the temperatures specification while dissipating the Thermal

Design Power.

Table 2. Thermal Specifications for the Intel®Core™2 Duo processor

CPU Processor SKU# TDP (W) TJ-MAX

(°C) TJ-MIN

(°C)

Intel® Core™ 2 Duo

Mobile Processors

on 45-nm process

Standard Voltage (Core 2 Duo-6M, Celeron-2M) 35

105 0Low Voltage (Core 2 Duo -3M) 17

Ultra Low Voltage (Core 2 Duo -2M, Celeron) 10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Intel Matériel informatique

Intel

Intel MultiProcessor Manuel utilisateur

Intel

Intel L5310 - Cpu Xeon Quad-Core Lv 1.6Ghz Fsb1066Mhz 8M Fc-Lga6... Manuel utilisateur

Intel

Intel Dialogic D/240SC-T1 Manuel utilisateur

Intel

Intel 486MIS Manuel utilisateur

Intel

Intel SL3VS - Celeron 633 MHz Processor Manuel utilisateur

Intel

Intel BX80571E7400 - Core 2 Duo 2.8 GHz Processor Mode d’emploi

Intel

Intel SOM-4486 ETX Module Manuel utilisateur

Intel

Intel SRCSASLS4I - RAID Controller Manuel d'installation

Intel

Intel DP45SG - CARACTERISTIQUES TECHNIQUES Manuel utilisateur

Intel

Intel QX9770 - Core 2 Extreme Quad-Core Processor Mode d’emploi

Intel

Intel RMS3CC080 Manuel utilisateur

Intel

Intel Q9450 - Core 2 Quad Quad-Core Processor Mode d’emploi

Intel

Intel I7-900 DESKTOP PROCESSOR - VOLUME 1 Manuel utilisateur

Intel

Intel X3350 - Xeon 2.66 Ghz 12M L2 Cache 1333MHz FSB LGA775 Quad-Core... Manuel utilisateur

Intel

Intel Core Duo Mobile 945GM Manuel utilisateur

Intel

Intel 7512 Mode d’emploi

Intel

Intel Xeon X3380 Guide de référence

Intel

Intel Xeon LV Manuel utilisateur

Intel

Intel PENTIUM P6000 SPECIFICATION 20 Manuel utilisateur

Intel

Intel DZ87KLT-75K Guide de configuration rapide

Intel

Intel 2ND GENERATION CORE PROCESSOR FAMILY DESKTOP - VOLUME 1... Manuel utilisateur

Intel

Intel T8300 - Core 2 Duo 2.4GHz 800MHz 3MB Socket P Mobile... Manuel de l'opérateur

Intel

Intel WPC2011NA - Pro/wireless 2011 Pccard Wireless... Manuel d'installation et d'exploitation

Intel

Intel RMFBU4 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Jupiter

Jupiter RAM PACK Manuel utilisateur