ICRealtime ICIP-P2012C Manuel utilisateur

Intelligent Speed Dome Installation Manual

Version 1.0.0

Table of Contents

1INTELLIGENT SPEED DOME INSTALLATION..................................................1

1.1 Installation Environments .....................................................................................................................1

1.2 Check installation space and installation location intension ...........................................................1

1.3 About cable.............................................................................................................................................1

1.4 Please keep all package material well for future use.......................................................................1

2SETUP BEFORE INSTALLATION ......................................................................2

2.1 Check Accessories................................................................................................................................2

2.2 Open Device...........................................................................................................................................2

2.3 Initial Setup.............................................................................................................................................2

2.4 Dial Switch Setup (For Analog Speed Dome Only)..........................................................................3

2.4.1 Dial Switch Buttons...........................................................................................................................3

2.4.2 Baud Rate and Parity Setup............................................................................................................4

2.4.3 Address ..............................................................................................................................................5

2.4.4 Terminal Matching Resistance Setup ............................................................................................5

3CEILING MOUNT................................................................................................7

3.1 Installation Components .......................................................................................................................7

3.2 Ceiling Mount Installation Steps ..........................................................................................................7

3.2.1 Installation Environments.................................................................................................................7

3.2.2 Installation Steps...............................................................................................................................7

3.2.3 Cable Connection .............................................................................................................................9

4WALL MOUNT BRACKET INSTALLATION......................................................10

4.1 Component Installation .......................................................................................................................10

4.2 Wall Mount Installation Steps ............................................................................................................10

4.2.1 Installation Environments...............................................................................................................10

4.2.2 Installation Steps.............................................................................................................................10

5IN-CEILING MOUNT BRACKET INSTALLATION ............................................13

5.1 Component Installation .......................................................................................................................13

5.2 Installation.............................................................................................................................................13

5.2.1 Installation Requirements ..............................................................................................................13

5.2.2 Installation Steps.............................................................................................................................13

6APPENDIX Ⅰ THUNDER PROOF AND SURGE PROTECTION .......................16

7APPENDIX Ⅱ ABOUT RS485 BUS ...................................................................17

7.1 RS485 Bus Main Feature ...................................................................................................................17

7.2 RS485 Bus Transmission Distance ..................................................................................................17

7.3 The Problem in Practical Use ............................................................................................................17

7.4 RS485 Bus FAQ ..................................................................................................................................18

8APPENDIX Ⅲ THE 24V AC WIRE GAUGE AND TRANSMISSION DISTANCE

RELATIONSHIP SHEET ..........................................................................................19

iii

9APPENDIX Ⅳ12V AC WIRE GAUGE AND TRANSMISSION DISTANCE

RELATIONSHIP SHEET ..........................................................................................20

10 APPENDIX V WIRE GAUGE REFERENCE SHEET ........................................21

Welcome

Thank you for purchasing our speed dome!

Please read the following safeguards and warnings carefully before you install or use the

product!

Important Safeguards and Warnings

Safety Measures

1. Qualified Engineer Needed

zThe installation engineer or maintenance engineer shall have corresponding CCTV system

installation certificate or maintenance qualification certificate.

zThe installation engineer or maintenance engineer shall have qualification certificate for work

at height.

zThe installation engineer or maintenance engineer shall have the basic knowledge and

operation technique for low-voltage cable layout and low-voltage electronic cable connection.

zPlease read the installation manual carefully and keep it well for future reference,

zWe are not liable for any problems caused by unauthorized modifications or attempted repair.

2. Lifting Appliance Requirement

zPlease select the proper speed dome installation mode and use the lifting appliances at the

safety environment.

zThe lifting appliances shall have the enough capacity to reach the installation height.

zThe lifting appliances shall have safe performance.

The precaution measures include two types: Warning and Note.

zWarning: It is to alert you there is an optional risk of death or series injury!

zNote: It is to alert you there is an optional risk of damage or property loss!

Warning

1. All installation and operation here should conform to your local electrical safety codes. We

assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

2. Be sure to use all the accessories (such as power adapter) recommended by manufacturer.

3. Do not connect several speed domes to one power adapter. It may result in overheat or fire

if it exceeds the rated load.

4. Before you connect the cable, install or uninstall, or begin the daily maintenance work,

please turn off the power and unplug the power cable.

5. Please make sure the produce is secure firmly on the wall or the ceiling.

6. Please turn off the power and unplug the power cable, If there is any smoke, disgusting

smell, or noise. Please contact your local retailer or customer service centre for help.

7. All the examination and repair work should be done by the qualified service engineers. We

are not liable for any problems caused by unauthorized modifications or attempted repair.

Note

1. Safety Transportation

zHeavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

zThis series product must use split type package during the transportation.

zWe are not liable for any damage or problem resulting from the integrated package during

the transportation.

2. When device is malfunction

Shut down the device and disconnect the power cable immediately if there is smoke, abnormal

smell or abnormal function. Please contact your local retailer ASAP.

3. Do not try to dismantle or modify the device

zThere is risk of personal injury or device damage resulting from opening the shell.

zPlease contact your local retailer if there is internal setup or maintenance requirement.

zWe are not liable for any problems caused by unauthorized modifications or attempted repair.

4. Do not allow other object falling into the device

zPlease make sure there is no metal or inflammable, explosive substance in the speed dome.

zThe above mentioned objects in the device may result in fire, short-circuit or damage.

zPlease shut down the device and disconnect the power cable if there is water or liquid falling

into the camera. Please contact your local retailer ASAP.

zPlease pay attention to the camera. Avoid the sea water or rain to erode the camera.

5. Handle carefully

Do not allow this series product fall down to the ground.

Avoid heavy vibration.

6. Installation Environment Requirement

zThis series speed dome should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances and etc.

zThis series product shall be away from the strong electromagnetism radiant, please keep it

away from wireless power, TV transmitter, transformer and etc.

7. Daily Maintenance

zPlease use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning

liquid to clean the shell and then use soft cloth to make it dry.

vii

zDo not use gasoline, dope thinner or other chemical material to clean the shell. It may result

in shell transfiguration or paint flake.

zDo not allow the plastic or rubber material to touch the shell for a long time. It may result in

paint flake.

1INTELLIGENT SPEED DOME INSTALLATION

1.1 Installation Environments

Basic Requirement

zAll installation and operation here should conform to your local electrical safety codes.

zBefore installation, please open the package and check all the components are included.

Please make sure the speed dome installation environment and installation mode can meet

your requirement. If there is special requirement, please contact your local retailer for more

information.

zWe assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

1.2 Check installation space and installation location intension

Please make sure the installation environment has enough space to install the speed dome and

its corresponding bracket.

Please make sure the ceiling, wall and the bracket can support the speed dome and its

corresponding installation component. It shall sustain the 8X weight of the speed dome.

1.3 About cable

Please select the cable according to your transmission distance.

The minimum video coaxial-cable requirement is:

z75 ohm.

zFull cable with copper conductor

z95% knitted copper shield

International Model Max Distance

(Ft\M)

RG59/U 750ft (229m)

RG6/U 1,000ft (305m)

RG11/U 1,500ft (457m)

zPlease refer to Appendix 2 for RS485 communication cable information.

Select eclectic wire according to your transmission distance:

zFor 24V AC series product, please refer to Appendix 3.

zFor 12V DC series product, please refer to Appendix 4.

1.4 Please keep all package material well for future use

Please keep speed dome package material well in case you need to send it back to your local

retailer or manufacturer for maintenance work.

Non-original package material may result in device damage during the transportation.

2SETUP BEFORE INSTALLATION

2.1 Check Accessories

Before the installation, please check the accessories one by one according to the packing list.

Please make sure all the components listed are included.

2.2 Open Device

This section is for intelligent analog speed dome, intelligent network speed dome, and intelligent

tracking speed dome.

Remove the package and then take out the device. Open the transparent cover and take out the

packing material EPE around the speed dome drive. Please remove the paster from the pedestal.

See Figure 2-1.

Figure 2-1

2.3 Initial Setup

The default setup is:

zAddress: 1

zBaud rate: 9600

zParity: None

z120Ωresistance: OFF

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ICRealtime Caméra de sécurité

ICRealtime

ICRealtime ELIP-3000N Manuel utilisateur

ICRealtime

ICRealtime F Series Manuel utilisateur

ICRealtime

ICRealtime ICIP-MP1801S Manuel utilisateur

ICRealtime

ICRealtime Pixim I-Sniper EL-720 Manuel utilisateur

ICRealtime

ICRealtime EL8000IR Manuel utilisateur

ICRealtime

ICRealtime ICR300H3W Manuel utilisateur

ICRealtime

ICRealtime EL-3000 Manuel utilisateur

ICRealtime

ICRealtime AVS-4MB4016-IR Manuel utilisateur

ICRealtime

ICRealtime HD-AVS Manuel utilisateur

ICRealtime

ICRealtime IPFX-S20F-W1 Manuel utilisateur

ICRealtime

ICRealtime EL700 Manuel utilisateur

ICRealtime

ICRealtime IPEL-M60F-IRW1 Manuel utilisateur

ICRealtime

ICRealtime F Series Manuel utilisateur

ICRealtime

ICRealtime ICR300H3B Manuel utilisateur

ICRealtime

ICRealtime ICHD850VDIR Manuel utilisateur

ICRealtime

ICRealtime ICR-220-IR Manuel utilisateur

ICRealtime

ICRealtime EL-790 Manuel utilisateur

ICRealtime

ICRealtime F Series Manuel utilisateur

ICRealtime

ICRealtime AVS-D2118VF Manuel utilisateur

ICRealtime

ICRealtime ICIP-3000CCD-W Manuel utilisateur

ICRealtime

ICRealtime PTZN23X4D Manuel utilisateur

ICRealtime

ICRealtime ICIPD2012VIR Manuel utilisateur

ICRealtime

ICRealtime ICR540VD Manuel utilisateur

ICRealtime

ICRealtime ICIP-B2000 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur