Honeywell Xenon XP 1950h Manuel utilisateur

Xenon™ XP 1950h

Corded Area-Imaging Scanner for Healthcare

Quick Start Guide

1950HC-EN-QS Rev B

4/19

Agency Model: 1950

Note: Refer to your User Guide for information about cleaning

your device.

Get Started

Turn off computer’s power before connecting the scanner, then

power up the computer once the scanner is fully connected.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.

Connect the Scanner

USB:

Keyboard Wedge:

RS232 Serial Port:

Reading Techniques

The view finder projects an aiming beam that

should be centered over the bar code, but it

can be positioned in any direction for a good

read.

Standard Product Defaults

The following bar code resets all standard product default set-

tings.

USB Serial

Scan the following code to program the scanner to emulate a

regular RS232-based COM Port. If you are using a Microsoft®

Windows® PC, you will need to download a driver from the Hon-

eywell website (www.honeywellaidc.com). The driver will use the

next available COM Port number. Apple® Macintosh computers

recognize the scanner as a USB CDC class device and automati-

cally use a class driver.

Note: No extra configuration (e.g., baud rate) is necessary.

Standard Product Defaults

USB Serial

USB PC Keyboard

Scan the following code to program the scanner for a USB PC

Keyboard.

Epic

Scan the following bar code to configure your device to commu-

nicate with an Epic software application.

Meditech®

Scan the following bar code to configure your device to commu-

nicate with a Meditech software application.

USB PC Keyboard

EMR Application

Meditech Application

Quiet Operations

The following codes configure the scanner for quiet modes that

do not disturb resting patients.

Silent Mode with Flashing LED

Scan the following bar code to completely silence the scanner.

When a bar code is scanned, the LED and aimer flash 5 times.

Green indicates a good scan, red indicates a bad scan.

Silent Mode with Long LED

Scan the following bar code to completely silence the scanner.

When a bar code is scanned, the LED and aimer remain solidly

lit for 1 second. Green indicates a good scan, red indicates a bad

scan.

Silent Mode with Flashing LED

Silent Mode with Long LED

Very Low Beeper (Nighttime Mode)

The following bar code programs the scanner for a very low

beep. When a bar code is scanned, the scanner emits a very soft

beep.

Low Beeper (Daytime Mode)

The following bar code programs the scanner for a low volume.

When a bar code is scanned, the scanner emits a low beep.

Trigger

The following bar codes will allow you to use the scanner in

Manual Trigger - Normal Mode (need to press the trigger to

read) or Presentation mode (the scanner is activated when it

“sees” a bar code).

Nighttime Mode

Daytime Mode

Manual Trigger - Normal

(Default)

Presentation Mode

Streaming Presentation™

When in Streaming Presentation mode, the scanner leaves the

scan illumination on all the time and continuously searches for

bar codes.

Suffix

If you want a carriage return after the bar code, scan the Add CR

Suffix bar code. To add a tab after the bar code, scan the Add

Tab Suffix bar code. Otherwise, scan the Remove Suffix bar

code to remove the suffixes.

Streaming Presentation Mode

Add CR Suffix

Add Tab Suffix

Remove Suffix

Add Code ID Prefix to all Symbologies

Scan the following bar code if you wish to add a Code ID prefix to

all symbologies at once.

Note: For a complete list of Code IDs, see the User Guide for your

product.

Keyboard Country

Scan the appropriate country code below to program the key-

board layout for your country or language. By default, national

character replacements are used for the following characters:

#$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart

in your User Guide to view the character replacements for each

country.

Add Code ID Prefix To All Symbologies

(Temporary)

USA (Default)

Belgium

Denmark

Finland

Table des matières

Autres manuels Honeywell Lecteur de codes-barres

Honeywell

Honeywell MX7 Tecton Manuel utilisateur

Honeywell

Honeywell 2020-5 Manuel utilisateur

Honeywell

Honeywell Xenon 1910 Manuel utilisateur

Honeywell

Honeywell 1900GHD Manuel utilisateur

Honeywell

Honeywell MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode... Manuel utilisateur

Honeywell

Honeywell Solaris MS7820 Manuel utilisateur

Honeywell

Honeywell Voyager 9520 Manuel utilisateur

Honeywell

Honeywell MK3780-71A38 Manuel utilisateur

Honeywell

Honeywell 3800i Manuel utilisateur

Honeywell

Honeywell 3800 Linear Series Manuel utilisateur

Honeywell

Honeywell MX7 Tecton Manuel utilisateur

Honeywell

Honeywell MK7580-30B41-00 - Metrologic MS7580 Genesis Manuel utilisateur

Honeywell

Honeywell HF800 Series Manuel utilisateur

Honeywell

Honeywell Virtuos 1D Manuel utilisateur

Honeywell

Honeywell Hyperion 1300G Manuel utilisateur

Honeywell

Honeywell Xenon 1900H Manuel utilisateur

Honeywell

Honeywell Fusion MS3780 Manuel utilisateur

Honeywell

Honeywell XENON 1900 Manuel utilisateur

Honeywell

Honeywell VOYAGER 1200G Manuel utilisateur

Honeywell

Honeywell 4820HDHM Manuel utilisateur

Honeywell

Honeywell Genesis 7580G Manuel utilisateur

Honeywell

Honeywell QUANTUME IS3480 Manuel utilisateur

Honeywell

Honeywell 4820HDHM Manuel utilisateur

Honeywell

Honeywell VOYAGER 1250G Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur