Honeywell Orbit MS7120 Manuel utilisateur

MS7120

Orbit®Presentation Laser Scanner

Installation and User’s Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in

specifications and other information contained in this document without prior

notice, and the reader should in all cases consult HII to determine whether any

such changes have been made. The information in this publication does not

represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained

herein: nor for incidental or consequential damages resulting from the furnishing,

performance, or use of this manual.

This document contains propriety information that is protected by copyright. All

rights reserved. No part of this document may be photocopied, reproduced, or

translated into another language without the prior written consent of HII.

Web Address: www.honeywellaidc.com

Trademarks

Metrologic, MetroSelect, and MetroSet2 are trademarks or registered trademarks

of Metrologic Instruments, Inc. or Honeywell International Inc.

Microsoft, Windows, and Windows 95 are trademarks or registered trademarks of

Microsoft Corporation.

IBM is a trademark of International Business Machines Corporation.

Other product names mentioned in this manual may be trademarks or registered

trademarks of their respective companies and are the property of their respective

owners.

Patents

Please refer to page 34 for a list of patents.

TABLE OF CONTENTS

Introduction

Product Overview ............................................................................................. 1

Scanner and Accessories................................................................................. 2

Scanner Components....................................................................................... 4

Cable Removal................................................................................................. 4

Caution and Serial Number Labels................................................................... 5

Maintenance..................................................................................................... 5

Mounting Specifications ................................................................................... 6

Installation

RS232, or Light Pen ......................................................................................... 7

RS485 .............................................................................................................. 8

Keyboard Wedge.............................................................................................. 9

Stand-Alone Keyboard Wedge....................................................................... 10

Full Speed or Low Speed USB....................................................................... 11

Scanner Operation

Indicators

Audible ....................................................................................................... 12

Visual ......................................................................................................... 13

Failure ........................................................................................................ 14

Depth of Field Specifications

Normal Scan Zone ..................................................................................... 15

Reduced Scan Zone................................................................................... 15

Depth of Field by Bar Code Element Width

Normal Scan Zone ..................................................................................... 16

Reduced Scan Zone................................................................................... 17

Troubleshooting Guide ....................................................................................... 18

Design Specifications ......................................................................................... 22

Applications and Protocols ................................................................................. 24

iii

TABLE OF CONTENTS

Scanner Configuration........................................................................................ 25

Configuration Modes ...................................................................................... 25

Bar Codes .................................................................................................. 25

MetroSet2................................................................................................... 25

Serial Configuration.................................................................................... 25

Upgrading the Firmware..................................................................................... 26

Scanner and Cable Terminations

Scanner Pinout Connections .......................................................................... 27

Cable Connector Configurations (Host End) .................................................. 28

Regulatory Compliance

Safety ............................................................................................................. 30

EMC ............................................................................................................... 31

Limited Warranty ................................................................................................ 33

Patents ............................................................................................................... 34

Index .................................................................................................................. 35

Customer Support .............................................................................................. 37

Technical Assistance...................................................................................... 37

Product Service and Repair............................................................................ 38

INTRODUCTION

Orbit®is an aggressive, omnidirectional laser bar code scanner ideal for use in

retail, convenience, liquor and specialty stores Designed to be lightweight and

rugged, Orbit’s small size makes it ideal for applications where counter space is

limited. The MS7120 unique contoured shape allows it to be picked-up and used

as a hand-held scanner when scanning large or bulky items.

Key Product Features

Fully Automatic Scanning Operation

Adjustable Scan Head

User-Replaceable Single Cable Interface To Host (Powerlink Compatible)

Seven Beeper Tones

Configurable Depth of Field

Firmware updates are easily loaded into Flash memory

OPOS and JPOS System Compatible

Support For Common Interfaces Including USB (See Table Below)

Easy Bar Code Configuration

ORBIT

MODEL NUMBER INTERFACE

MS7120-38 RS232 Low Speed USB,

Keyboard Emulation Mode or Serial Emulation Mode*

MS7120-41 RS232/Light Pen Emulation

MS7120-47 Keyboard Wedge,

Stand-Alone Keyboard and RS232 Transmit/Receive

MS7120-106 RS485and Full Speed USB

* Configurable for Keyboard Emulation Mode or Serial Emulation Mode.

Default setting is Keyboard Emulation Mode.

Applicable for IBM®Host applications.

INTRODUCTION

Scanner and Accessories

BASIC KIT COMPONENTS

Part No. Description

MS7120 Orbit Presentation Laser Bar Code Scanner

00-02282xMS7120 Orbit Presentation Laser Bar Code Scanner

Installation and User’s Guide

00-02407xMetroSelect®Configuration Guide

* Guides also available for download at www.honeywellaidc.com.

OPTIONAL ACCESSORIES

Part No. Description

AC to DC Power Transformer - Regulated 5.2VDC @ 1A output.

46-00525 90VAC to 255VAC United States, Canada and Japan

46-00526 90VAC to 255VAC Continental European

46-00527 90VAC to 255VAC United Kingdom

46-00528 90VAC to 255VAC Australia

46-00529 90VAC to 255VAC China

46-00530 90VAC to 255VAC India

59-59000x -3 RS232 PowerLink Cable with Built in Power Jack

straight cord, short strain relief

Other items may be ordered for the specific protocol being used. To order additional items,

contact the dealer, distributor or customer service representative.

INTRODUCTION

Scanner and Accessories

OPTIONAL ACCESSORIES

Part No. Description

MVC** RS485 Applications

MVC Cable ±12VDC to +5.2VDC

** Contact a customer service representative for additional information on

the MVC cable series and the host connections available.

59-59002x-3 Keyboard Wedge PowerLink Cable

straight cord, short strain relief

59-59020x-3 Stand Alone Keyboard PowerLink Cable

straight cord, short strain relief

54-54213x-N-3 USB Full Speed Cable, Locking Plus-Power™Type A

straight cord, short strain relief

54-54214x-N-3

USB Full Speed Cable, Locking Plus-Power™ Type A

straight cord, short strain relief

This cable is for use with full speed

USB (-106) interface only.

59-59235x-N-3 USB Low Speed Communication Cable, Type A

straight cord, short strain relief

45-45619 Counter/Wall Mount Kit

Other items may be ordered for the specific protocol being used. To order additional items,

contact the dealer, distributor or customer service representative.

INTRODUCTION

Scanner Components

ITEM NODESCRIPTION

1 White LED (see page 12)

2 Blue LED (see page 12)

3 Red Output Window (Laser Aperture)

4 Speaker (see page 12)

5 Pin Hole for Cable Release

6 10-Pin RJ45, Female Socket (see page 28)

7 Adjustable Scan Head, 30°

Figure 1. Scanner Components

Cable Removal

1. Locate the small ‘pin-hole’ on the bottom of

the scanner near the cable.

2. Bend an ordinary paperclip into the shape

shown.

3. Insert the paperclip into the small ‘pin-hole’.

4. There will be a faint ‘click’ when the cable

lock is released. Pull gently on the strain-

relief of the PowerLink cable to remove it

from the scanner.

Figure 2. Cable Release

INTRODUCTION

Caution and Serial Number Labels

Figure 3. Labeling Locations on the Bottom of the Scanner and Examples

Caution

To maintain compliance with applicable standards, all circuits connected to the scanner must

meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC 60950-1.

To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and norm

EN/IEC 60950-1, the power source should meet applicable performance requirements for a

limited power source.

Maintenance

Smudges and dirt on the unit's window can interfere with the unit's performance.

If the window requires cleaning, use only a mild glass cleaner containing no

ammonia. When cleaning the window, spray the cleaner onto a lint free, non-

abrasive cleaning cloth then gently wipe the window clean.

If the unit's case requires cleaning, use a mild cleaning agent that does not

contain strong oxidizing chemicals. Strong cleaning agents may discolor or

damage the unit's exterior.

INTRODUCTIONINTRODUCTION

Mounting Specifications

Optional Wall/Counter Mount

Item Description Qty.

a. Locking Plate, PN 50-50302 1

b. Base Cover, PN 50-50301 1

c. #7 x 1.00" Wood Screw, PN 18-18013 3

d. M3 x 8 mm Flathead Screw, PN 18-18004 4

Figure 4. Kit Components

1. Drill three #39 pilot holes.

Note the position Orbit will rest

(see Figure 5). Use the dimensions

provided in Figure 5 or the locking

plate as a template to drill three

#39 pilot holes in the mounting

surface.

Figure 5

2. Attach the locking plate to the wall/counter.

Secure the locking plate to the counter/wall with the three #7 x 1.00" wood

screws provided (see Figure 6).

3. Attach the base plate to the Orbit.

Secure the base cover to the bottom of Orbit using the four M3 x 8 mm

screws provided (see Figure 7).

4. Mount Orbit to the locking plate.

Hold Orbit 90° clockwise from the desired position then lower it over the

locking plate until it sits flush to the countertop. Twist Orbit counter

clockwise 90° to lock the scanner in place (see Figure 8).

Figure 8

Figure 7

Figure 6

Autres manuels pour Orbit MS7120

Table des matières

Autres manuels Honeywell Lecteur de codes-barres

Honeywell

Honeywell Quick Check 890 Manuel utilisateur

Honeywell

Honeywell MX7 Tecton Manuel utilisateur

Honeywell

Honeywell QUANTUME IS3480 Manuel utilisateur

Honeywell

Honeywell XENON 1900 Manuel utilisateur

Honeywell

Honeywell VoyagerCG MS9540 Manuel utilisateur

Honeywell

Honeywell MS2431 Manuel utilisateur

Honeywell

Honeywell VOYAGER 1250G Manuel utilisateur

Honeywell

Honeywell Orbit MS7120 Manuel utilisateur

Honeywell

Honeywell XENON 1902 Manuel utilisateur

Honeywell

Honeywell Horizon MS7600 Manuel utilisateur

Honeywell

Honeywell MS9535-5 Manuel utilisateur

Honeywell

Honeywell MS2421 Manuel utilisateur

Honeywell

Honeywell Hyperion 1300G Manuel utilisateur

Honeywell

Honeywell MS4980 Manuel utilisateur

Honeywell

Honeywell Xenon XP 195 Series Manuel utilisateur

Honeywell

Honeywell Granit XP 199 i Series Manuel utilisateur

Honeywell

Honeywell I-Class Mark II Manuel utilisateur

Honeywell

Honeywell 2020 Manuel utilisateur

Honeywell

Honeywell VOYAGER 1202G BF Manuel utilisateur

Honeywell

Honeywell MX7 Tecton Manuel utilisateur

Honeywell

Honeywell 3800 Linear Series Manuel utilisateur

Honeywell

Honeywell VoyagerGS MS9590i Manuel utilisateur

Honeywell

Honeywell 3800 Linear Series Manuel utilisateur

Honeywell

Honeywell 7120 Orbit Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur