HighPoint SSD7103 Manuel utilisateur

SSD7103

4x M.2 Port to PCIe 3.0x16 NVMe RAID Controller

Quick Installation Guide

V1.04

System Requirements

PC Requirements

•System with an empty x16 PCIe 3.0 slot

(Please refer to the SSD7103 compatibility list.)

•Windows 10 and Windows Sever 2016 or later

•Linux kernel 3.10 or later

•macOS 10.13 and later

SSD7103 Kit Contents

•SSD7103 Controller Card

•Quick Installation Guide

SSD7103 Hardware

Front View

Aluminum casing with integrated thermal pad

Intake for cooling fan

Low-Noise cooling fan

PCIe 3.0 x16 Host Interface

NVMe Drive Installation:

Step 1. On the rear of the SSD7103, remove the six screws that secure

the unit’s front panel to the PCB.

After removing the screws, carefully remove the front panel from

the SSD7103.

Step 2. After removing the casing, carefully turn it over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, however, it can also prevent the

thermal pad form conducting the heat away from the NVMe SSD's if

we don't remove it.

Step 3. These 4 screws are used to install the NVMe SSD’s.

Step 4. The SSDs should be installed from top to bottom. Remove the

top screw.

Step 5. Gently insert the SSD into the slot.

Note: Please make sure all disks are clean before you insert them

into the slot to avoid unexpected situations.

Step 6. Refasten the screw to secure the SSD.

Repeat Steps 4 to 6 to install the remaining SSDs.

Note: Make sure the SSD’s are carefully, but securely installed

into each M.2 port. Loose connections can cause a variety of

stability and performance issues, and may ultimately result in data

loss.

The following example shows four M.2 SSDs installed into Ports 1-4:

Step 7. Replace the front panel after installing all SSDs

Step 8. On the rear of the SSD7103, refasten the 6 screws that were

removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the SSD7103. If the cover is improperly

Prot1

Prot2

Prot3

Prot4

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD’s and controller componentry, which may result in damage

to the SSD’s or controller hardware, performance loss, unstable I/O,

and the loss of data.

Note: Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note: Install the driver in the system first and then install the board!

Resources

We recommend visiting the SSD7103 Product Resources Page for the

latest documentation:

Software Download:

SSD7103 Driver, WebGUI, Installation Guide

https://www.highpoint-tech.com/USA_new/series-ssd7103-

download.htm

Other Reference Information:

Motherboard & NVMe SSD Compatibility List

SSD7103 User Guide – How To Set Up & Monitor RAID Array

https://www.highpoint-tech.com/USA_new/series-ssd7103-

resource.htm

FAQ & Troubleshooting:

https://highpoint-tech.com/USA_new/support-faq-nvme.htm

Customer Support

If you encounter any problems while utilizing the SSD7103 drive, or

have any questions about this or any other HighPoint Technologies, Inc.

product, feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/websupport/

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

Autres manuels pour SSD7103

Table des matières

Autres manuels HighPoint Matériel informatique

HighPoint

HighPoint RR2720A Manuel utilisateur

HighPoint

HighPoint SSD7202 Manuel utilisateur

HighPoint

HighPoint RocketAIC 7540HM Series Manuel utilisateur

HighPoint

HighPoint SRD7104FDC Manuel utilisateur

HighPoint

HighPoint HS8004F Manuel utilisateur

HighPoint

HighPoint rDrive 6114VM-4T Manuel utilisateur

HighPoint

HighPoint Rocket 1108A Manuel utilisateur

HighPoint

HighPoint RocketRAID 4520 Manuel utilisateur

HighPoint

HighPoint RocketAIC 7749EW Series Manuel utilisateur

HighPoint

HighPoint RocketStor 6661A-mSAS1 Manuel utilisateur

HighPoint

HighPoint RocketStor 6618A Manuel utilisateur

HighPoint

HighPoint RocketRAID 1640 Manuel utilisateur

HighPoint

HighPoint Rocket 1504 Manuel utilisateur

HighPoint

HighPoint SRD7505DC Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint rSSD 7101B Manuel utilisateur

HighPoint

HighPoint SSD6202 Manuel utilisateur

HighPoint

HighPoint SSD6200 Series Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint RocketRAID 3700 Series Manuel utilisateur

HighPoint

HighPoint RocketAIC 7505HM Series Manuel utilisateur

HighPoint

HighPoint RR3700 Series Manuel utilisateur

HighPoint

HighPoint SSD7180 Manuel utilisateur

HighPoint

HighPoint SSD7505 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur