HighPoint SSD7505 Manuel utilisateur

SSD7505 Linux CentOS7.8 Installation Guide

HighPoint NVMe RAID Controller

SSD7505 Linux CentOS7.8

Installation Guide

Vers ion 1.00

Last updated on November 6, 2020

SSD7505 Linux CentOS7.8 Installation Guide

Ta b l e o f C o n t e n t s

1 Overview ....................................................................................................................................... 1

2 Installing Linux CentOS7.8 on SSD7505 controller ................................................................. 1

Step 1 Prepare Your Hardware for Installation ......................................................................... 1

Step 2 Check System EFI Settings ............................................................................................ 1

Step 3 Flash UEFI Rom to SSD7505 ........................................................................................ 4

Step 4 Create Array ................................................................................................................... 4

Step 5 Prepare the Driver Diskette ............................................................................................ 5

Step 6 Install Linux CentOS7.8 ................................................................................................ 6

3 Monitoring the Driver .................................................................................................................. 8

4 Installing RAID Management Software ..................................................................................... 8

5 Trouble Shooting .......................................................................................................................... 9

SSD7505 Linux CentOS7.8 Installation Guide

- 1 -

1 Overview

The purpose of this document is to provide clear instructions on how to install Linux

CentOS7.8 on the SSD7505 controller.

For CentOS7.8 (kernel: 3.10.0-1127.el7.x86_64)

Mirror link:

https://mirrors.bfsu.edu.cn/centos/7.8.2003/isos/x86_64/CentOS-7-x86_64-DVD-2003.iso

MD5: ef8195f42f30a23f039eef9891d496ae

2 Installing Linux CentOS7.8 on SSD7505 controller

If you would like to install Linux CentOS7.8 onto drives attached to SSD7505 controller,

please perform the following operations:

Step 1 Prepare Your Hardware for Installation

After you attach your NVMe SSD to SSD7505 controller, you can use SSD7505 EFI

Utility to configure your NVMe SSD as RAID arrays, or just use them as single disks.

Before installation, you must remove all the NVMe SSD, which are not physically

attached to SSD7505 controller, from your system.

Note

SSD7505 only support EFI boot. If you have other SCSI adapters installed, you must

make sure the SSD7505 controller EFI will be loaded firstly. If not, try to move it to

another PCI slot. Otherwise you may be unable to boot up your system.

Step 2 Check System EFI Settings

In your system EFI SETUP menu, change Boot Sequence in such a way that the system

will first boot from EFI CDROM, and then from SSD7505 RAID. Refer to your

motherboard EFI manual to see how to set boot sequence.

If your EFI settings do not support such a boot sequence, you can first set it to boot from

EFI CDROM. After you finish installation, set SSD7505 RAID as the first boot device to

boot up the system.

1. Set UEFI setting with SuperMicro X11DPi-NT motherboard as an example:

a. Set ‘Boot mode select’ to ‘UEFI’;

SSD7505 Linux CentOS7.8 Installation Guide

- 2 -

b. And ‘Advanced->PCIe/PCI/PnP Configuration->CPU Slot PCI-E OPROM’ to

‘EFI’. If the SSD7505 has been connected to the motherboard CPU1Slot2 PCI-E

X16, you should set "CPU1Slot2 PCI-E X16 OPROM" to "EFI";

c. Disable ‘Secure Boot’, set ‘Secure Boot’ to ‘Disabled’;

2. Set UEFI setting with ASUS PRIME X299 -DELUXE motherboard as an example

a. Set " Boot->CSM->Boot from Storage Devices" to "UEFI driver first";

SSD7505 Linux CentOS7.8 Installation Guide

- 3 -

b. And " Boot->CSM->Boot Device Control" to "UEFI Only" or "UEFI and Legacy

OPROM";

c. Set " Boot->Secure Boot->OS Type" to "Other OS".

3. Set UEFI setting with GA-X570 AORUS MASTER motherboard as an example

a. Set " Boot->CSM Support " to "Enabled";

b. And " Boot-> Storage Boot Option Control " to "UEFI Only";

SSD7505 Linux CentOS7.8 Installation Guide

- 4 -

Step 3 Flash UEFI Rom to SSD7505

a. Unzip SSD7505 UEFI package to root dir (/) of a USB flash driver, and insert the

USB flash drive to the motherboard;

b. Booting from the UEFI USB flash and enter the UEFI environment;

c. Command with “go.nsh”, flash UEFI rom to SSD7505 Controller and reboot;

Step 4 Create Array

a. Attach four NVMe SSD to SSD7505 Controller;

Note

Make%sure%your%USB%flash%partition%format%is%FAT32.%

b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD

information：

SSD7505 Linux CentOS7.8 Installation Guide

- 5 -

c. Enter the motherboard’s Boot List and select start from UEFI USB flash:

d. Command ”Arraycreate.efi” to enter the Utility:

e. Command “create RAID0 ”.

Create RAID0 array with all disks and with maximum capacity.

f. Command “exit”；

g. For more command usages, refer to Appendix A.

Step 5 Prepare the Driver Diskette

Extract HighPoint_NVMe_CentOS_7u8_x86_64_ vx.x.x_xx_xx_xx.tar.gz to top(/)

directory of an USB flash drive. It will look like:

SSD7505 Linux CentOS7.8 Installation Guide

- 6 -

Step 6 Install Linux CentOS7.8

a. Insert the USB flash drive to the target system.

b. Booting from Installation DVD disc (EFI mode).

c. When the Installation screen appears:

If you want to choose the default system installation, please select "Install CentOS7" to

install, press ‘e’ to edit boot command line option.

Type “inst.dd modprobe.blacklist=nvme” and then press Ctrl+X to start installation.

Press CTRL+X or F10 to start the system.

d. When following messages show up, type the line number that line with the LABEL of

USB flash drive.

In this example, type 2 and press Enter

e. Choose driver disk ISO file, In this example, type 1 and press Enter

f. Select drivers to install

a) [ ]/media/DD-2/rpms/x86_64/kmod-redhat-hptnvme-v1.2.20.1-2020_10_15_el7.8.x8

6_64.rpm

In this example, type 1 and press Enter

SSD7505 Linux CentOS7.8 Installation Guide

- 7 -

b) [x]/media/DD-2/rpms/x86_64/kmod-redhat-hptnvme-v1.2.20.1-2020_10_15_el7.8.x

86_64.rpm

In this example, type c and press Enter

g. After the driver is installed, type c and press Enter to continue the system installation

h. When the installation switches to the graphical installation, select "continue".

i. Refer to RHEL/CentOS Linux installation guide to continue the installation and when

installation finishes and prompts you to reboot the system:

j. Open source driver needs to be installed after system installation. Run the .bin file to

SSD7505 Linux CentOS7.8 Installation Guide

- 8 -

install the driver package.

Linux open source driver link, open the following link to enter the "Software Download"

page to download:

https://highpoint-tech.com/USA_new/series-ssd7505-overview.htm

# sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin

k. Follow the prompts to complete the driver installation.

l. After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/hptnvme /x

This command will show the driver version number, physical device list and logical device

list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to SSD7505 controller.

Please refer to HighPoint RAID Management Software documents for more information.

Autres manuels pour SSD7505

Table des matières

Autres manuels HighPoint Matériel informatique

HighPoint

HighPoint RocketRAID 840A Manuel utilisateur

HighPoint

HighPoint SSD7540 Manuel utilisateur

HighPoint

HighPoint SRD Series Manuel utilisateur

HighPoint

HighPoint SSD7540 Manuel utilisateur

HighPoint

HighPoint SSD7110 Manuel utilisateur

HighPoint

HighPoint SSD7104 Manuel utilisateur

HighPoint

HighPoint RocketAIC 7540HM Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 4520 Manuel utilisateur

HighPoint

HighPoint Rocket 1508 Manuel utilisateur

HighPoint

HighPoint RR3700 Series Manuel utilisateur

HighPoint

HighPoint SSD7101A Manuel utilisateur

HighPoint

HighPoint RocketAIC 7749EM Manuel utilisateur

HighPoint

HighPoint SSD7140 Manuel utilisateur

HighPoint

HighPoint SSD6200 Series Manuel utilisateur

HighPoint

HighPoint Rocket 1104 Manuel utilisateur

HighPoint

HighPoint RocketStor 6618A Manuel utilisateur

HighPoint

HighPoint R1000 Series Manuel utilisateur

HighPoint

HighPoint RocketCache 3240X8 Manuel utilisateur

HighPoint

HighPoint SRD Series Manuel utilisateur

HighPoint

HighPoint SSD7202 Manuel utilisateur

HighPoint

HighPoint SSD7202 Manuel utilisateur

HighPoint

HighPoint RocketAIC 7749EW Series Manuel utilisateur

HighPoint

HighPoint SSD7540 Manuel utilisateur

HighPoint

HighPoint SSD7505 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur