HighPoint Rocket 1104 Manuel utilisateur

Rocket 1104 (R1104)

Rocket 1204 (R1204)

4x M.2 Port to PCIe 3.0 x8/x16 NVMe HBA’s

Quick Installation Guide

V1.01

R1104

R1204

System Requirements

PC Requirements

• System with a free PCIe 3.0 (or 4.0) x16 slot

R1104: requires an x16 slot

R1204: x8 or x16 slot

•Windows 11, 10 / Server 2022, 2019, 2016, Microsoft

Hyper-V

•RHEL/Debian/Ubuntu/Fedora/Proxmox/Xenserver (Linux

kernel 3.10 and later)

•macOS 10.13.6 ~ macOS 13.x

• FreeBSD 12.1 and later

R1104 Kit Contents

• R1104 Controller Card

• Quick Installation Guide

R1204 Kit Contents

• R1204 Controller Card

• Quick Installation Guide

R1104 Hardware

Front View

Full-length black anodized aluminum, fan-less heatsink

PCIe x16 host interface with Smart Switching

R1204 Hardware

Front View

Full-length black anodized aluminum, fan-less heatsink

PCIe x8 host interface with Smart Switching

R1104/R1204 Hardware Installation:

Using the R1204 as an example:

Step 1. On the rear of the R1204, remove the six screws that

secure the unit’s heat sink to the PCB.

After removing the screws, carefully remove the heat sink

from the R1204.

Step 2. After removing the casing, carefully turn it over to

view the thermal pad. The blue film must be removed

from the pad before reinstalling the panel. This film

protects the pad from damage and foreign objects prior to

installation. However, it can also prevent the thermal pad

form conducting heat away from the NVMe SSDs not

removed.

Step 3. These 4 screws are used to install the NVMe SSD’s.

The R1104 and R1204 can support any M.2 form factor

(2242, 2260, 2280, and 22110).

Step 4. Please remove the screws on the right side of the

R1204:

Step 5. Gently insert the SSD into the slot.

Note: If the NVMe SSDs were used previously, make sure

the connectors are clean and free of dust prior to

installation.

Step 6. Refasten the screw to secure the SSD.

Repeat Steps 4 to 6 to install the remaining SSDs.

Note: Make sure the SSDs are carefully, but securely installed

into each M.2 port. Loose connections can cause a variety of

stability and performance issues, and may ultimately result in

data loss.

The following example shows four M.2 SSDs installed into

Ports 1-4:

Step 7. Reattach the heat sink after installing all the SSDs.

Port1

Port2

Port3

Port4

Step 8. On the rear of the R1204, refasten the six screws that

were removed in step 1.

Note

：

Make sure the aluminum heatsink is properly aligned

with the controller board (PCB), and that it makes full contact

with the thermal pad, before refastening it to the R1204/R1104.

If the heatsink is improperly installed, it will be unable to

sufficiently cool the NVMe SSDs and controller componentry,

which may result in damage to the SSDs or controller

hardware, performance loss, unstable I/O, and the loss of data.

Resources

A variety of manuals, guides and FAQs are available for the

R1104 and R1204 NVMe HBA’s.

In addition, we recommend visiting the Downloads section of

the product’s webpage for the latest documentation.

Document Downloads:

https://www.highpoint-tech.com/hba-gen3-nvme-m2

Customer Support

If you encounter any problems while utilizing the R1104/

R1204, or have any questions about this or any other HighPoin

t Technologies, Inc. product, feel free to contact our Customer

Support Department.

Web Support:

https://www.highpoint-tech.com/support-and-services

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HighPoint Matériel informatique

HighPoint

HighPoint SSD7000 Series Manuel utilisateur

HighPoint

HighPoint SRD Series Manuel utilisateur

HighPoint

HighPoint Rocket 1120 Manuel utilisateur

HighPoint

HighPoint Rocket 750 Manuel utilisateur

HighPoint

HighPoint SSD7202 Manuel utilisateur

HighPoint

HighPoint R1000 Series Manuel utilisateur

HighPoint

HighPoint Rocket 1108 Manuel utilisateur

HighPoint

HighPoint Rocket 1108A Manuel utilisateur

HighPoint

HighPoint SSD7180 Manuel utilisateur

HighPoint

HighPoint R1104F Manuel utilisateur

HighPoint

HighPoint RocketStor 6661A-mSAS1 Manuel utilisateur

HighPoint

HighPoint SSD6200 Series Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint RocketRAID 1640 Manuel utilisateur

HighPoint

HighPoint SSD6202 Manuel utilisateur

HighPoint

HighPoint SSD7101A-1 Manuel utilisateur

HighPoint

HighPoint rDrive 6114VW-4T Manuel utilisateur

HighPoint

HighPoint RocketStor 6618A Manuel utilisateur

HighPoint

HighPoint SSD7110 Manuel utilisateur

HighPoint

HighPoint RocketAIC 7540HM Series Manuel utilisateur

HighPoint

HighPoint BRD Series Manuel utilisateur

HighPoint

HighPoint Rocket 1504 Manuel utilisateur

HighPoint

HighPoint Rocket 1580 Manuel utilisateur

HighPoint

HighPoint Rocket 1508 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur