Gofanco HDbaseT-HDR Manuel utilisateur

HDbaseT HDMI 2.0 Extender

with HDR

User's Guide

G4-0045A

P/N: HDbaseT-HDR

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals

download, please go to www.gofanco.com/

download.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

locationtoavoiddamagefromoverheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the HDMI cables and IR

Extension cables in/out when the device is

in use to avoid cable damage. Make sure

they are plugged into the correct ports

• Use the included DC12V power adapter

only. Make sure the specification matches

if using 3rd-party DC power adapter

PackageContents

• Transmitter (TX) & Receiver (RX)

• IR Blaster & IR Receiver Extension Cables

• Power Adapter (1x)

• 3-Pin Phoenix Connector and Plastic

Cushions (8x)

• RS-232 Cables (2x)

• Mounting Ears and Screws (4x)

• User's Guide

Introduction

The HDbaseT HDMI 2.0 Extender with HDR

extends HDMI signals up to 70 meters (230ft)

with PoC using an economical CAT5e/6 cable.

Features

• Extends HDMI transmissions up to 70m

(230ft) @ 1080p and 40m (130ft) @ 4K

• Supports UHD 4K/60Hz/4:4:4. HDMI 2.0

& HDCP 2.2 compliant and backward

compatible with previous versions

• Supports HDR with 18Gbps bandwidth

• Supports CEC, Bi-directional IR, and

RS-232 pass-through

• Bi-directional PoC (Power over Cable)

support. Only 1 power adapter required to

power both the transmitter and receiver

• Featuresfirmwareupdateoptionsfor future

compatibility expansion

Product Layout

Figure 1: Transmitter and Receiver

No. Name Description

1 Mode Switcher

- CTRL: RS-232 pass-through

- UPDATE A: Firmware update mode

- UPDATE B: Update compression IC

2 Power LED Red when power adapter is connected

3HDMI IN (Transmitter) Connects to your HDMI source

HDMI OUT (Receiver) Connects to your HDMI display

3-Pin Terminal Block

(Transmitter)

RS-232 pass-through. Connects to your

computer's RS-232 port using the included

RS-232 cable

3-Pin Terminal Block

(Receiver)

RS-232 pass-through. Connects to your

end device's RS-232 port using the

included RS-232 cable

5IRIN Plug the IR Receiver Extension cable here,

receives signals from an IR remote control

6IROUT

Plug the IR Blaster Extension cable here,

transmitts the signals from an IR remote

control

HDBT OUT (Transmitter) Connects to the HDBT IN of the Receiver

using a CAT5e/6 cable

HDBT IN (Receiver) Connects to the HDBT OUT of the

Transmitter using a CAT5e/6 cable

8 DC 12V Power Jack Plug the included power adapter into

either power jack, to power both units

IR Extenders

•IR Blaster cable: Plug into the Transmitter's

or Receiver's IR OUT to emit IR signals

•IR Receiver cable: Plug into the Receiver's

or Transmitter's IR IN to receive IR signals

Control your media player (such as DVD) at the

TV side using the media player's remote

controller

• Plug the IR Receiver cable to the Receiver's

IR IN port

• Plugthe IR Blaster cabletotheTransmitter's

IR OUT port

Control your TV at the media player side using

the TV's remote controller

• Plug the IR Receiver cable to the

Transmitter's IR IN port

• Plug the IR Blaster cable to the Receiver's

IR OUT port

Note: Incorrect placement of the IR cables may

result in cable failures. Please check carefully

beforepluggingintheIRcables. TheIRReceiver

cable always plugs into an IR IN port & IR

Blaster cablealways plugs into an IR OUT port.

Installation Requirements

1. HDMI source device (computer, DVD

player, XBOX, PS3, etc).

2. HDMI display device (SDTV/Monitor,

HDTV/Monitor, projector, etc.).

3. UTP/STP CAT5e/6 cable following

IEEE-568B wiring standard.

Hardware Installation

1. Power off all devices including your HDMI

source and HDMI display.

Transmitter

2. Connect your HDMI source device to the

Transmitter's HDMI IN connector with a

HDMI cable (HDMI cable not included).

3. Optional: Connect your RS-232 source

device with the included cable.

Receiver

4. Connect your HDMI display to the

Receiver's HDMI OUT connector with a

HDMI cable (HDMI cable not included).

5. Optional: Connect your RS-232 end device

with the included cable.

6. Plug your CAT5e/6 cable between the

Transmitter's HDBT Out and Receiver's

HDBT IN.

7. Optional: Connect the IR Extension cables

according to the instructions on page 6.

8. Plug the included power adapter into either

the Transmitter's or Receiver's power jack,

then plug the power adapter into a reliable

power source. Note: Only one power

adapter is needed to power both

Transmitter and Receiver.

9. Power on all connected devices.

10. The HDMI extender is ready for use.

Application

Figure 2:

FAQ & Solutions

Q: There is no video output or audio and

video display is not normal:

A: 1) Use a shorter network cable.

Q: The extender is not working properly:

A: 1) Please check the cable lengths below:

-HDMI cables:Upto 5m(Input and Output)

- Network cables (CAT5e/6):

- Up to 70m @ 1080p

- Up to 40m @ 4K

Table des matières

Autres manuels gofanco Extenseur

gofanco

gofanco 4K120 Manuel utilisateur

gofanco

gofanco HDbitTPro Manuel utilisateur

gofanco

gofanco G4-0014A Manuel utilisateur

gofanco

gofanco KVMHDExt Manuel utilisateur

gofanco

gofanco prophecy PRO-HDRextract Manuel utilisateur

gofanco

gofanco HDwireless200 Manuel utilisateur

gofanco

gofanco HD20Ext-Cas Manuel utilisateur

gofanco

gofanco CAT5E Manuel utilisateur

gofanco

gofanco HDbitTv2 Manuel utilisateur

gofanco

gofanco HDMIExt2 Manuel utilisateur

gofanco

gofanco HDExt70 Manuel utilisateur

gofanco

gofanco HDbitT4Pv2 Manuel utilisateur

gofanco

gofanco HD20Ext1xN Manuel utilisateur

gofanco

gofanco HD14Ext Manuel utilisateur

gofanco

gofanco HDBaseT4P-4K Manuel utilisateur

gofanco

gofanco HDExt Manuel utilisateur

gofanco

gofanco HD14Ext-EDID Manuel utilisateur

gofanco

gofanco HDExtIP4K Manuel utilisateur

gofanco

gofanco HD14Ext1xN Manuel utilisateur

gofanco

gofanco HDbitT8P Manuel utilisateur

gofanco

gofanco HDMIExt8P Manuel utilisateur

gofanco

gofanco HDwireless100-LT Manuel utilisateur

gofanco

gofanco HD20Ext-LT Manuel utilisateur

gofanco

gofanco HD20wireless Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

gofanco HDbaseT-HDR Manuel utilisateur

Manuels Extenseur populaires d'autres marques