Gofanco AudioCATExt500 Manuel utilisateur

Audio CAT Extender - 500m

User's Guide

G4-0113A

P/N: AudioCATExt500

Thank you for purchasing from gofanco. Our

products aim to meet all your connectivity needs

wherever you go. For optimum performance

and safety, please read the instructions carefully

and keep this User’s Guide for future reference.

If you need more information about our

products, please visit www.gofanco.com. For

technical support, please email us at

[email protected]. For drivers/manuals

download, please go to www.gofanco.com/

downloads.

Important Safety Notices

Please read safety instructions carefully before

installation and operation.

• Please pay close attention to all warnings

and hints for this device

• Do not expose this unit to rain, heavy

moisture, or liquid

• Do not repair the device or open the

enclosure without professional guidance

to avoid electric shocks. Doing so may void

your warranty

• Keep the product in a well-ventilated

location to avoid damage from overheating

• Shut off power and make sure environment

is safe before installation

• Do not plug the Coaxial, Toslink, and CAT

cables in/out when the device is in use to

avoid cable damage. Make sure they are

plugged into the correct ports

• Use the included DC12V power adapter

only. Make sure the specification matches

if using 3rd-party DC power adapters

Introduction

The Audio CAT Extender - 500m extends digital

audio signals up to 500 meters using an

economical CAT cable.

Features

• Extends Toslink/Coaxial up to 500m

(1640ft) over a CATx cable, or Analog up to

450m (1476ft)

• Audio inputs: Toslink, Coaxial, or Analog

• Simultaneous audio outputs: Toslink,

Coaxial, Analog

• Auto input detection: Analog > Coaxial >

Toslink

• Bi-directional PoC. Connect the power

adapter to either the TX or RX to power

both units

• Audio formats:

- Toslink/Coaxial: PCM 2.0, Dolby/DTS 5.1

- Analog: Stereo/PCM 2.0

PackageContents

• Audio CAT Extender -500m (1 TX & 1 RX)

• Power adapter (1pc)

• User's Guide

Product Layout

Figure 1: Transmitter (TX)

1 - Analog audio input

2 - Toslink input

3 - Coaxial input

4 - Power jack (12V/1A)

5 - CAT output

Figure 2: Receiver (RX)

Hardware Installation

1. Power off all devices including your audio

source and audio output device.

2. Connect your audio source device to the

Transmitter's Analog, Coaxial or Toslink

input connector with a Coaxial or Toslink

cable (cable not included). Note: Only one

input connector can be used at any one

time. Input detection priority: Analog >

Coaxial > Toslink.

Product LayoutContinued

1 - Analog audio output

2 - Toslink output

3 - Coaxial output

4 - Power jack (12V/1A)

5 - CAT input

3. Connect a CAT cable between the

Transmitter's CAT output and Receiver's

CAT input (cable not included).

4. Connect your audio output device (TV,

AVR, speakers, etc.) to the Receiver's

Analog, Coaxial and/or Toslink output

connector (cables not included). Note:

Analogaudioinput:Allthreeaudio outputs

can be connected and produce sound

simultaneously. Digital audio input: Both

Coaxial and Toslink outputs can be

connected and produce sound

simultaneously.

5. Plug the included power adapter into the

Transmitter or Receiver's power jack, then

plug thepower adapterintoa reliablepower

source. Note: Bi-directional Power over

Cable (PoC) technology allows one power

adapter to power both the TX and RX

through CAT cable.

6. Power on all connected devices.

7. The extender is ready for use.

Application

Analog Audio Source Device

Toslink/Coaxial Audio Source Device

Notes:

• Only one input connector can be used at a

time

• Input detection priority: Analog > Coaxial

> Toslink

Analog audio formats: Stereo/PCM 2.0

Toslink/Coaxialaudioformats:PCM2.0,Dolby/

DTS 5.1

Specifications

Blank Page

Table des matières

Autres manuels gofanco Extenseur

gofanco

gofanco HDbitTPro Manuel utilisateur

gofanco

gofanco HDMIExt2 Manuel utilisateur

gofanco

gofanco HDBITT4K22 Manuel utilisateur

gofanco

gofanco HDwireless200 Manuel utilisateur

gofanco

gofanco HDMIExt4P Manuel utilisateur

gofanco

gofanco HDMIExtSplit Manuel utilisateur

gofanco

gofanco HDMIExt8P Manuel utilisateur

gofanco

gofanco HDwireless100 Manuel utilisateur

gofanco

gofanco KVMHDExt4K Manuel utilisateur

gofanco

gofanco HDbitT8P Manuel utilisateur

gofanco

gofanco HD14Ext-EDID Manuel utilisateur

gofanco

gofanco prophecy PRO-HDRextract Manuel utilisateur

gofanco

gofanco Prophecy PRO-HDExtIP-TX Manuel utilisateur

gofanco

gofanco CAT5E Manuel utilisateur

gofanco

gofanco HDBaseT4P-4K Manuel utilisateur

gofanco

gofanco HDEXT120ESD Manuel utilisateur

gofanco

gofanco HD14Ext-2P Manuel utilisateur

gofanco

gofanco HDwireless100 Manuel utilisateur

gofanco

gofanco KVMHD20Ext Manuel utilisateur

gofanco

gofanco HDBaseT Manuel utilisateur

gofanco

gofanco HDExt50 Manuel utilisateur

gofanco

gofanco HDExtIP4K Manuel utilisateur

gofanco

gofanco HD20Ext-LT Manuel utilisateur

gofanco

gofanco HD20wireless Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

gofanco AudioCATExt500 Manuel utilisateur

Manuels Extenseur populaires d'autres marques