Gefen EXT-USB-400FON Manuel utilisateur

USB 400 FO

EXT-USB-400FON

User Manual

www.gefen.com

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM PST Monday thru Friday, Paciﬁc Time

Write To:

Gefen LLC

c/o Customer Service

20600 Nordhoff St

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen LLC reserves the right to make changes in the hardware, packaging and

any accompanying documentation without prior written notice.

USB-400FO is a trademark of Gefen LLC

All trademarks are the property of their respective owners.

All trademarks are the property of their respective companies

ASKING FOR ASSISTANCE

Rev A5

CONTENTS

1 Introduction

2 Operation Notes

3 Features

4 Sender Unit Panel Layout

5 Sender Unit Panel Descriptions

6 Receiver Unit Panel Layout

7 Receiver Unit Panel Descriptions

8 Connecting And Operating The USB-400FO Extender

8 Wiring Diagram

9 Troubleshooting The USB-400FO Extender

14 Speciﬁcations

15 Warranty

INTRODUCTION

Congratulations on your purchase of the USB-400FO. Your complete satisfaction

is very important to us.

Gefen

Gefen delivers innovative, progressive computer and electronics add-on solutions

that harness integration, extension, distribution and conversion technologies.

Gefen’s reliable, plug-and-play products supplement cross-platform computer

systems, professional audio/video environments and HDTV systems of all sizes

with hard-working solutions that are easy to implement and simple to operate.

The Gefen USB-400FO

The USB-400 FO Extender supports all USB 2.0 devices, extending to 1640 feet

(500 meters) away from the USB source. The receiver end is also a four USB

2.0 hub.

By using ﬁber optic cables, the USB-400FO extends a long distance from the

location of a computer. It provides an EMI-free solution for using USB at remote

locations.

How It Works

The USB-400FO sender unit is connected to the source using the supplied USB

short cable. The USB peripheral(s) are connected to the receiver unit at the

remote end. Two LC-terminated multi-mode ﬁber optic cables are used to link the

sender to the receiver. The Receiver unit must be powered by a 5V DC power

supply. The Sender unit is powered by the USB bus.

Applications

The USB-400FO is invaluable for applications where complete control of devices

is necessary when using USB when placing in restricted areas, such as medical

facilities and oil rigs. The USB-400FO will connect with any USB-compliant

peripheral in all operating systems supporting USB 2.0.

READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE USB-400FO

This equipment is a new version replacing the existing part number,

EXT-USB-400FO, and can provide outstanding extension facilities for any device

or USB application that requires a peripheral connection over a distance, such as

a USB camera or USB hard drive, keyboard and mouse.

The USB-400FO works like a USB hub with extension capabilities over a distance of

up to 1,640 feet. This means, for example, that a remote USB sensor can be placed

at a safe distance from the sender unit in situations that demand this type of security.

The USB-400FO signal controls the keyboard, mouse, trackball and other USB

peripherals using send and receive units. The USB signal is extended by using

multimode ﬁber optic cabling.

The USB-400FO uses dual multi-mode LC ﬁber optic cables to connect the sender

and receiver units.

FCC Radio Frequency Interference Statement Warning

This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) this device may not cause harmful interference, and (2) this device must

accept any interference received including interference that may cause undesired

operation.

Requirements:

To complete the installation, you will also require the following items that are not

included with the product:

• USB 1.1 or 2.0 Compatible computer (host computer) with a USB compliant

operating system

• USB 1.1 or 2.0 Compatible device

• 2-strand ﬁber optic cable with Duplex LC connectors (if using surface

cabling) OR, 2-strand ﬁber optic cabling with two information outlets and two

2-strand ﬁber optic patch cords with Duplex LC connectors (if using premise

cabling) .

The Sender Unit and Receiver Unit are interconnected by up to 500 meters of

ﬁber optic cabling. Two strands of 50/125m (500m) MMF or 62.5/125m (275m)

MMF cabling are required. The cabling subsystem must provide a duplex

connection with crossover, and must be terminated with Duplex LC connectors

at both ends.

OPERATION NOTES

FEATURES

Features

• “Extreme USB” technology is used to extend the range of USB 2.0 devices

up to 1640 feet (500 meters) using ﬁber-optic cables

• Receiver unit is also a USB 2.0 four-port hub

• Provides support for both low-speed and high-speed USB devices

• Fully backward-compliant with USB 1.1 and USB 2.0 speciﬁcations as

certiﬁed by the USB Implementation.

• Number of USB devices can be expanded using standard USB hubs

• Supports all operating systems including Windows®, Mac OS®, and Linux®

• Supports other USB peripherals and are used in devices such as PlayStation

and Wii.

• A very secure method of USB control in areas where environmental

conditions prohibit access by people

• Metal box for better RF-sheidling.

• Ideal as optical isolation from over-voltage and static electricity

• Supports High Speed devices up to 480Mbs

Package Includes

(1) Gefen USB-400FO Sender Unit

(1) Gefen USB-400FO Receiver Unit

(1) 6 ft. USB Cable (A-B)

(1) 5V DC Power Supply

(1) User Manual

SENDER UNIT PANEL LAYOUT

Front Panel

Back Panel

1234

65 7

SENDER UNIT PANEL DESCRIPTIONS

1 Power Indicator

LED turns bright blue when power is supplied.

2 Link Indicator

This LED turns bright green when a valid ExtremeUSB® link is established

between the Sender Unit and Receiver Unit.

3 Host Indicator

This LED turns bright green when the USB-400FO system is properly

enumerated on the host PC. The LED blinks when in Suspend Mode.

4 Activity Indicator

This LED turns bright amber, indicating that data transmission is active between

the Sender Unit and Receiver Unit. The LED blinks intermittently with or without

a USB device plugged in. When the Sender Unit and Receiver Unit are in a

Suspend Mode, the LED is off.

5 Power port

An optional 5V power supply can be connected to the Sender unit to provide

power if the USB port on the host PC is not capable of delivering 500mA to the

unit.

6 USB Port

Used to connect the Sender unit to the host computer.

7 Link Port

Extension link Duplex LC ﬁber optic transceiver port.

RECEIVER UNIT PANEL LAYOUT

Front Panel

Back Panel

3456

RECEIVER UNIT PANEL DESCRIPTIONS

1 USB Port (1-4)

USB device input ports.

2 USB Indicator (1-4)

This LED indicates when a USB device is connected to the Device Port. Solid

green when device is plugged in and active. Off when device is in a suspend

mode or Receiver unit is powered off. Orange when the Receiver unit detects an

overcurrent condition, or if the attached USB device attempts to draw more than

the 500mA current.

3 Power Indicator

This LED turns bright blue when power is supplied.

4 Link Indicator

This LED turns bright green when a valid ExtremeUSB® link is established

between the Sender Unit and Receiver Unit.

5 Host Indicator

This LED turns bright green when the USB-400FO system is properly

enumerated on the host PC. The LED blinks when in Suspend Mode.

6 Activity Indicator

This LED turns bright amber, indicating that data transmission is active between

the Sender and Receiver. The LED blinks intermittently with or without a USB

device plugged in. When the Sender Unit and Receiver Unit are in a Suspend

Mode, the LED is off.

7 Power port

Connects to the 5V DC power supply.

8 Link Port

Connect one end of a duplex LC ﬁber optic cable to this port.

Autres manuels pour EXT-USB-400FON

Table des matières

Autres manuels Gefen Extenseur

Gefen

Gefen EXT-UHD600-1SC Manuel utilisateur

Gefen

Gefen EXT-HDTV-CAT5 Manuel utilisateur

Gefen

Gefen RS-232 Manuel utilisateur

Gefen

Gefen EXT-VGAKVM-LAN Manuel utilisateur

Gefen

Gefen EXT-HDMI1.3-1FO Manuel utilisateur

Gefen

Gefen CAT5-9000HD Manuel utilisateur

Gefen

Gefen Toolbox GTB-HDMI-3DTV Manuel utilisateur

Gefen

Gefen DVI-2000HD Manuel utilisateur

Gefen

Gefen EXT-USB-MIDI Manuel utilisateur

Gefen

Gefen EXT-COMP-141N Manuel utilisateur

Gefen

Gefen PS2-100 Manuel utilisateur

Gefen

Gefen EXT-USB-MINI2N Manuel utilisateur

Gefen

Gefen EXT-DP-141B Manuel utilisateur

Gefen

Gefen EXT-2DVI-CAT6DL Manuel utilisateur

Gefen

Gefen Super Booster Plus EXT-HDMI1.3-141SBP Manuel utilisateur

Gefen

Gefen CAT5-4000 Manuel utilisateur

Gefen

Gefen USB 2.0 LR Extender EXT-USB2.0-LR Manuel utilisateur

Gefen

Gefen GTB-UHD2IRS-ELRPOL-BLK Manuel utilisateur

Gefen

Gefen HDMI CAT-5 Manuel utilisateur

Gefen

Gefen EXT-HDMI1.3-1FO Manuel utilisateur

Gefen

Gefen CAT5-9000 Manuel utilisateur

Gefen

Gefen EXT-HDMI1.3-CAT5-ELR Manuel utilisateur

Gefen

Gefen ex-tend-it CAT5-1000 Manuel utilisateur

Gefen

Gefen VGA-141LR Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur