Gefen DVI-2000HD Manuel utilisateur
DVI•2000HD
USER MANUAL
www.gefen.com
Technical Support:
Telephone (818) 772-9100
(800) 545-6900
Fax (818) 772-9120
Technical Support Hours:
8:00 AM to 5:00 PM Monday thru Friday.
Write To:
Gefen Inc.
c/o Customer Service
20600 Nordhoff St
Chatsworth, CA 91311
www.gefen.com
Notice
Gefen Inc. reserves the right to make changes in the hardware, packaging and
any accompanying documentation without prior written notice.
The DVI•2000 is a trademark of Gefen Inc.
© 2008 Gefen Inc., All Rights Reserved
All trademarks are the property of their respective companies
ASKING FOR ASSISTANCE
CONTENTS
1 Introduction
2 Operation Notes
3 Features
4 Sender Panel Layout
5 Receiver Panel Layout
6 Connecting And Operating The DVI•2000HD
7 Network Cable Wiring Diagram
8 Specifications
9 Warranty
1
Congratulations on your purchase of the DVI•2000HD. Your complete satisfaction
is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen DVI•2000HD
The DVI•2000HD extends your dual link DVI display up to 1640 feet away from
your source. Dual link DVI describes the use of all 24 pins of the DVI (digital
visual interface) connector to achieve super high resolutions.
How It Works
The DVI•2000HDS sender unit sits next to your computer, set-top box or DVD
player source. Cables supplied with the DVI•2000HD connect your DVI source to
the send unit. The DVI•2000HDR receive unit sits next to your DVI display - up to
1640 feet away. The display plugs into the back of the receiver unit. One CAT-5
cable and multi mode LC fiber optic cable (8 strand) connect the sender and the
receiver units to each other.
INTRODUCTION
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE DVI•2000HD
The fiber optics cable must be treated carefully when connectors are ex-• posed. They are susceptible to dust which can contribute to loss of pixels.
The DVI•2000 works for all DVI displays and supports resolutions up to• 3840x2400.
The DVI•2000 is housed in a metal box for better RF shielding.•
Supports DDWG standard for DVI compliant monitors.•
Uses CAT-5 cable for HDCP/DDC and control signals.•
2
OPERATION NOTES
3
Features
Extends any dual link DVI compliant device up to 1640 (500 meters) feet• from the computer
Uses an 8 strand multimode LC-LC fiber optic cable•
Uses one CAT-5e cable for DDC and control signals•
Support HDTV resolutions•
Supports up to 3840 x 2400 resolutions•
Supports DDWG standard for DVI compliant monitor•
Package Includes
(1) DVI•2000HDS Sender
(1) DVI•2000HDR Receiver
(1) 12v Power Supply
(1) 6 Foot DVI-DL cable (M-M)
(1) User’s Manual
FEATURES
4
Front Panel
Back Panel
HDCP & DDC
Signals
Status LED indicates
a link between the
sender and receiver
Power LED indicates the unit is powered
Hot Plug Detect Green 2 Green 1
Clock 2
Clock 1 Red 2Red 1
Blue 2Blue 1
Power
Connector
DVI In
SENDER PANEL LAYOUT
5
Front Panel
Back Panel
Green 2 Green 1
Clock 1
Power LED indicates the unit is powered
Clock 2
Red 2 Red 1
Blue 2 Blue 1 HDCP & DDC
Signals
Status LED indicates
a link between the
sender and receiver
Hot Plug Detect
Power
Connector
DVI Out
RECEIVER PANEL LAYOUT
6
How to Connect the DVI•2000HD
Connect the DVI•2000 sender unit to the DVI source using the supplied1. cables.
Connect the DVI•2000 receiver unit to your DVI display.2.
Connect the eight fiber optics and one CAT5 cable between the sender and3. receiver.
Plug the 12VDC power supplies into the DVI•2000 sender.4.
You should now have a video signal.5.
CONNECTING AND OPERATING THE DVI•2000HD
12345678
Gefen has specifically engineered their products to work with the TIA/EIA-568-B
specification. Please adhere to the table below when field terminating cable for
use with Gefen products. Failure to do so may produce unexpected results and
reduced performance.
CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types.
Gefen recommends using solid core cabling. CAT-6 cable is also recommended
for best results.
Each cable run must be one continuous run from one end to the other. No splices
or use of punch down blocks.
Pin Color
1 Orange / White
2 Orange
3 Green / White
4 Blue
5 Blue / White
6 Green
7 Brown / White
8 Brown
7
NETWORK CABLE WIRING DIAGRAM
Autres manuels pour DVI-2000HD
1
Table des matières
Autres manuels Gefen Extenseur
Gefen
Gefen EXT-CAT5-5500HD Manuel utilisateur
Gefen
Gefen GTV-ETH-2-PLC Manuel utilisateur
Gefen
Gefen EXT-DVI-FM15 Manuel utilisateur
Gefen
Gefen DVI RS232 Manuel utilisateur
Gefen
Gefen EXT-HDMI-EDIDP Manuel utilisateur
Gefen
Gefen ex-tend-it CAT5-1500 Manuel utilisateur
Gefen
Gefen VGA Extender SR Manuel utilisateur
Gefen
Gefen USB-200 Manuel utilisateur
Gefen
Gefen COMP-141N Manuel utilisateur
Gefen
Gefen CAT5-5500 Manuel utilisateur
Gefen
Gefen EXT-DVI-FMP Manuel utilisateur
Gefen
Gefen HDMI CAT-5 Manuel utilisateur
Gefen
Gefen CAT5-8500 Manuel utilisateur
Gefen
Gefen ex-tend-it CAT5-1500 Manuel utilisateur
Gefen
Gefen EXT-CAT5-5600A Manuel utilisateur
Gefen
Gefen EXT-DVI Audio-Cat5 Manuel utilisateur
Gefen
Gefen USB-MIDI Manuel utilisateur
Gefen
Gefen VGA-AUDIO-141 Manuel utilisateur
Gefen
Gefen EXT-DVI-CP-FM10 Manuel utilisateur
Gefen
Gefen Firewire 800 Manuel utilisateur
