GE RM24933 Manuel utilisateur

Universal

Remote Control

INSTRUCTION

MANUAL

RM24933

Table Of Contents

Button Description 1-2

Battery Installation 2

Programming for TV 4

Programming for VCR 5

Programming for Cable Box or Satellite 6

DVD or AUX Button 7

Code Search 8

Retrieving Codes 9

Television Menu Function 10-11

DBS Menu Function 12-13

Sleep Feature 14

Trouble Shooting 15-16

Warranty 16

Instructions in Spanish 17-31

Button Description

INDICATOR LIGHT

The Indicator Light flashes to show that the

remote is working.

ON•OFF

The ON•OFF button operates the same as

your original remote (note: some RCA, GE

and ProScan models require you to press

the device key to turn the device on and the

ON•OFF key to turn the device off).

SETUP

Used to program the remote or to search

through codes.

TV, VCR, DVD•AUX, CBL•SAT

The TV, VCR, DVD•AUX and CBL•SAT but-

tons are used to select the device you want

to control.

REVERSE, PLAY, FORWARD, RECORD,

STOP, PAUSE

The REVERSE, PLAY, FORWARD, RECORD,

STOP and PAUSE buttons operate the same

as on your original VCR remote. You must

press the RECORD button twice to begin

recording. Buttons also control similar func-

tions for DVD and CD players.

TV•VCR

The TV•VCR button operates the TV•VCR

function of your VCR.

ENTER

The ENTER button is used to complete

channel selection for some brands of TV.

It is also used to complete the code entry

process.

VOL & CHAN

The VOL (Volume) and CH (Channel) buttons

increase or decrease channel numbers or

volume.

MUTE

To MUTE the volume on the TV.

PREV CH

PREV CH allows you to go to the previous

channel you selected. Operates the same as

Last Channel, Go Back or Recall button on

your original remote.

0-9

The number buttons operate the same as on

your original remote, and are used for enter-

ing device codes or channel numbers.

The MENU button calls up the TV and DBS

set up menus.

Battery Installation

Your Universal Remote requires two (2)

new AAA alkaline batteries. To install the

batteries:

1. On the back of the remote, push and

slide the cover off.

2. Match the batteries to the + and

- marks inside the battery case, then

insert the batteries.

3. Press and slide the battery cover back

into place.

Note: Programmed codes will remain in

memory for a short period of time allow-

ing for battery replacement. If batteries

have been dead for a prolonged period of

time, reprogramming may be required.

Button Description

Programming For TV

1. Manually turn on the TV.

2. Press and hold the

SETUP button until

the INDICATOR LIGHT

lights, then release

the SETUP button.

3. Press and release the

TV button (the

INDICATOR LIGHT

will blink then

remain lit).

4. Find the three digit

code for your TV in

the TV code list, and

enter it using the

Number Buttons.

After your code is

entered, the

INDICATOR LIGHT

will turn off.

5. Aim the remote at your

TV and press the

ON•OFF button. Your

TV should turn off.

Note: If your TV does not

respond, try all the codes

for your brand. If the codes

do not work, or your brand

is not listed, try the Code

Search method on page 8.

6. With your TV on, press

CH+. If the TV responds,

no further program-

ming is required.

7. Enter your code here

for easy reference.

Programming For VCR

1. Manually turn

on the VCR.

2. Press and hold

the SETUP button

until the INDICATOR

LIGHT lights, then

release the SETUP

button.

3. Press and release

the VCR button (the

INDICATOR LIGHT

will blink then

remain lit).

4. Find the three digit

code for your VCR

in the code list and

enter it using the

Number Buttons.

After your code is

entered, the INDICATOR

LIGHT will turn off.

5. Aim the remote at

your VCR and press

the ON•OFF button.

Your VCR should turn off.

Note: If your VCR does

not respond, try all

the codes for your

brand. If the codes

do not work, or your

brand is not listed,

try the Code Search

method on page 8.

6. With your VCR on,

press CH+. If the

VCR responds,

no further

programming

is required.

7. Enter your code

here for easy reference.

Programming For Cable Box or

Satellite Receiver

The CBL • SAT button is defaulted to RCA/

GE/ProScan DBS systems, however other

DBS systems can be programmed to this

button.

1. Manually turn on

the Cable Box.

2. Press and hold the

SETUP button until

the INDICATOR LIGHT

lights, then release

the SETUP button.

3. Press and release

the CABLE button

(the INDICATOR

LIGHT will blink

then remain lit).

4. Find the three digit

code for your Cable

Box or Satellite Receiver

in the code list

and enter it using

the Number Buttons.

After your code is

entered, the

INDICATOR LIGHT

will turn off.

5. Aim the remote at

your Cable Box or satellite receiver

and press the ON•OFF button. Your

Cable Box should turn off.

Note: If your Cable Box

does not respond, try all

the codes for your brand.

If the codes do not work,

or your brand is not

listed, try the Code

Search method on

page 8.

6. With your Cable Box

on, press CH+. If the

Cable Box or satellite

receiver responds,

no further program-

ming is required.

7. Enter your code here

for easy reference.

The DVD•AUX Button

The DVD•AUX button can be used for a

DVD player. It can also be assigned to any

other type of device (another TV, VCR,

DVD, CD Player, or audio receiver).

1. Manually turn on the

the device you wish

to assign to the

DVD•AUX button

(TV, VCR or Cable

Box or DVD Player).

2. Press and hold the

SETUP button until

the INDICATOR LIGHT

lights, then release

the SETUP button.

3. Press and release the

DVD•AUX button. The

INDICATOR LIGHT

will blink.

4. Find the three digit code

for the device you wish

to program in the code list

Enter the code using the

Number Buttons.

After your code is

entered, the INDICATOR

LIGHT will turn off.

5. Aim the remote at your

device and press the

ON•OFF button. Your

device should turn off.

Note: If your device

does not respond, try

all the codes for your

brand. If the codes do

not work, or your brand

is not listed, try the

Code Search method

on page 8.

6. With your device on,

press CH+. If the

device responds,

no further program-

ming is required.

7. Enter your code here

for easy reference.

Programming With Code

If your TV, VCR, DVD.CD player, satel-

lite receiver, or Cable Box does not

respond after you have tried all the

codes for your brand, or if your brand

is not listed, try searching for your

code by following the steps below.

1. Turn on the device

you wish to program.

2. Press and hold SETUP

until the INDICATOR

LIGHT lights, then

release SETUP.

3. Press and release the

device button for the

device you are

programming. The

INDICATOR LIGHT

will blink once then

remain lit.

4. Press and release

ON•OFF until your

device turns off.

Important: You may

have to press ON•OFF

up to 200 times.

5. When your device

turns off, press the

ENTER button, the

INDICATOR LIGHT

will go off.

Retrieving Codes

If you need to find the three-digit code

for your TV, VCR, DBS Receiver, or

Cable Box after your device is set-up

using Code Search, use this procedure.

1. Press and hold SETUP

until the INDICATOR

LIGHT lights, then

release SETUP.

2. Press and release the

device button for the

device’s code you are

retrieving . The

INDICATOR LIGHT

will blink once then

remain lit.

3. Press and release

SETUP. The

INDICATOR LIGHT

will turn off.

4. Starting with 0 on the

keypad, press the

number buttons in

order (0-9) until the

INDICATOR LIGHT

blinks.

5. The number which

causes the INDICATOR

LIGHT to blink is the

first digit of your code.

6. Repeat step 4 until you

have retrieved all three

numbers in the code.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

Sky

Sky MY Manuel utilisateur

RCA

RCA RCU600M - Universal Remote Control Manuel utilisateur

Savant

Savant SUR-0500 Guide de référence rapide

GDI

GDI GDI-WT2K Manuel utilisateur