GE RM24925 Manuel utilisateur

Universal

Remote Control

INSTRUCTION

MANUAL

RM24925

Thank you for purchasing the GE Universal

Remote Control. This product is designed

to provide years of service operating a wide

variety of video and audio equipment.

Please retain this guide for future reference.

Table of Contents

Install the Batteries 1

Button Description 2-4

Programming for TV 5

Programming for VCR 6

Programming For DVD 7

Programming For DBS System 8

Programming For Cable 9

Programming For Audio 10

Programming For AUX 11

Operating Audio Function 12-13

Sleep Functions 14

Menu Functions 15

Programming With Code Search 16

Identifying Codes For Your Remote 17

Trouble Shooting 18

Warranty 19

Lost Codes 19

This Universal Remote Control is already

programmed for most GE, RCA and ProScan

TVs, VCRs, DBS Systems, DVD Players, and

Audio/Video Receivers.

NOTE: For users of GE, RCA and ProScan

DBS Products, older DBS models require that

the DISPLAY Button on this remote be used

to make program selections. Use the SELECT

Button for making program selections on

newer GE, RCA and ProScan DBS models.

Battery Installation

Your Universal Remote Control requires 2 AAA

alkaline batteries.

To install the batteries:

1. Turn the remote over and push down on the

cover and slide it off.

2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Insert the batteries, matching the batteries to the (+)

mark inside the battery case.

3. Slide the battery cover back into place.

NOTE: Programmed codes will remain in memory

for a short period of time allowing for battery

replacement. If batteries have been dead for a

prolonged period of time, reprogramming may be

Button Description

INDICATOR LIGHT

The Indicator Light flashes to show that the

remote is working.

ON•OFF

The ON•OFF button operates the same as

your original remote.

NOTE: Some GE, RCA and ProScan models

require you to press the device button to turn

the device on and the ON•OFF button to

turn the device off.

TV, VCR, DVD, SAT, AUDIO, AUX, CBL

The TV, VCR, DVD, SAT, AUDIO-AUX, and

CBL buttons are used to select the device you

want to control.

VOL & CHAN

The VOL (Volume) and CHAN (Channel)

buttons increase or decrease the channel

numbers or volume.The CHANNEL buttons

also control the SKIP functions for DVD and

CD Player.

MUTE

Mutes volume on the TV.

PREV CHAN

The PREV CHAN button allows you to go to

the previous channel you selected. Operates

the same as Last Channel, Go Back or Recall

on your original remote.

CODE SEARCH

Used to program the remote or to search

through codes.

GUIDE

Brings up the on-screen TV program guide if

your TV has that feature.

DISP

Display Button shows the date and the time

if your TV or VCR has that feature.

NAVIGATION BUTTONS & SELECT

Used to move through on-screen menuing

and guides. With some DBS models the DISP

button should be used to select the high-

lighted item. Use the navigation buttons to

move the highlighted choice up, down, left

or right.

MENU•PROG

Brings up the Main Menu. If you already in

the menu system, press SELECT to select a

highlighted choice. Use the arrows buttons to

move through the Menu Selection.

CLEAR

Removes the on screen display to return to

normal viewing.

0-9

The number buttons operates the same as on

your original remote, and are used for enter-

ing device codes.

ENTER

The ENTER button is used to complete chan-

nel selection for some brands of TV. It is also

used to complete the code entry process.

TV/VCR

The TV/VCR button operates the TV/VCR

function of your TV.

REW, PLAY, FF, REC, STOP, PAUSE

These buttons operate the same as on your

original VCR or remote. You must press the

REC button twice to begin recording. The

REW and FF buttons also control the Reverse

and Forward functions for DVD and CD

Player.

PIP, SWAP & INPUT

PIP (Picture-in-Picture) and SWAP operate

your television’s Picture-in-Picture features.

INPUT selects the video input of your TV if

equipped with this feature.

SLEEP

The SLEEP button allows you to set a time

for you to turn off your TV automatically.

Button Description For Audio

Operation

Press AUDIO device button to enable the

AUDIO MODE Audio functions indicated by

pink descriptions

LEVEL+/LEVEL-

Sets the level of the speakers during test tone

mode.

DSP ON•OFF

Enables the receiver’s Digital Sound

Processing Mode.

DSP MODE

When the DSP mode is enabled, pressing this

button allows the user to toggle through the

various DSP modes.

CD, TAPE, TUNER, TV, VIDEO

The CD, TAPE, TUNER, TV and VIDEO but-

tons are used to directly select the device you

want to control. (Works in AUDIO mode).

AM•FM

The AM•FM button allows you to select the

AM•FM band on your audio receiver.

FUNCTION

Toggles the different audio input devices.

The number buttons also select the function

labeled below the buttons when in AUDIO

mode.

DELAY-, ON, DELAY+

Increases or decreases the delay between

the surround and main speakers when the

receiver is in the surround sound mode.

ON•OFF,

SURR. MODE

ON•OFF

SURR. toggles

the sur-

round modes

on and off.

SURR MODE

toggles through

the receiver’s

various sur-

round sound

mode settings.

FRONT,

CENTER,

REAR, TEST

Adjust the

levels of the

front, center,

and rear speak-

ers respec-

tively. The test

tone must be

enabled first

by pressing the

TEST button.

PRESET

Used to operate

preset channels

while in the

AUDIO mode.

Programming For TV

Most GE, RCA and ProScan TVs will not

require programming. Check to see if your

TV responds to the remote before you begin

programming.

1. Manually turn on the TV. Find the three

digit code for your TV

in the code list below.

2. Press and hold the

CODE SEARCH but-

ton

until the INDICATOR

LIGHT lights, then

release the CODE

SEARCH button.

3. Press and release

the TV button (The

INDICATOR LIGHT

will blink then

remain lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

INDICATOR LIGHT

will turn off. If the

code is not valid, the

INDICATOR LIGHT

will blink. Check the

code list and repeat

process.

5. Aim the remote at

your TV and press the

ON•OFF button. Your

TV should turn off.

NOTE: If your TV does not respond, try all

the codes for your brand. If the codes do

not work, or your brand is not listed, try the

Code Search method.

6. With your TV on, press CHAN+

(CHANNEL UP). If the TV responds, no

further programming is required.

7. Enter your code here for easy reference.

TV CODE

CHAN +

ON•OFF

12 3

4 5 6

7 8 9

(OFF)

(BLINK)

INDICATOR

LIGHT 

CODE

SEARCH

Programming For VCR

Most GE, RCA and ProScan VCRs will not

require programming. Check to see if your

VCR responds to the remote before you

begin programming.

1. Manually turn on the VCR. Find the

three digit code for your VCR in the code list

below.

2. Press and hold the

CODE SEARCH button

until the INDICATOR

LIGHT lights, then

release the CODE

SEARCH button.

3. Press and release

the VCR button (The

INDICATOR LIGHT

will blink then remain

lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

INDICATOR

LIGHT will turn off. If

the code is not valid,

the INDICATOR LIGHT

will blink. Check the

code list and repeat

process.

5. Aim the remote at

your VCR and press the

ON•OFF button. Your

VCR should turn off.

NOTE: If your VCR does not respond, try

all the codes for your brand. If the codes do

not work, or your brand is not listed, try the

Code Search method.

6. With your VCR on, press CHAN+

(CHANNEL UP). If the VCR responds, no

further programming is required.

7. Enter your code here for easy reference.

VCR CODE

CHAN +

ON•OFF

12 3

4 5 6

7 8 9

(OFF)

(BLINK)

INDICATOR

LIGHT 

VCR

CODE

SEARCH

Programming For DVD

Most GE, RCA and ProScan DVD systems

will not require programming. Check to see

if your DVD system responds to the remote

before you begin programming.

1. Manually turn on the DVD system. Find

the three digit code for your DVD system in

the code list below.

2. Press and hold the

CODE SEARCH button

until the INDICATOR

LIGHT lights, then

release the CODE

SEARCH button.

3. Press and release

the DVD button (The

INDICATOR LIGHT

will blink then remain

lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

INDICATOR

LIGHT will turn off. If

the code is not valid, the

INDICATOR LIGHT will

blink. Check the code

list and repeat process.

5. Aim the remote at

your DVD system and

press the ON•OFF but-

ton. Your DVD system

should turn off.

6. If the DVD System responds, no further

programming is required.

NOTE: If your DVD does not respond, try

all the codes for your brand. If the codes do

not work, or your brand is not listed, try the

Code Search method.

7. Enter your code here for easy reference.

CODE LIST

DVD CODE

ON•OFF

12 3

4 5 6

7 8 9

(OFF)

(BLINK)

INDICATOR

LIGHT 

DVD

CODE

SEARCH

Programming For DBS Satellite System

Most GE, RCA and ProScan Satellite systems

will not require programming. Check to see

if your DBS Satellite system responds to the

remote before you begin programming.

1. Manually turn on the DBS system. Find

the three digit code for your DBS

system in the code list below.

2. Press and hold the CODE SEARCH but-

ton

until the INDICATOR

LIGHT lights, then

release the CODE

SEARCH button.

3. Press and release

the DBS button (The

INDICATOR LIGHT

will blink then

remain lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

INDICATOR LIGHT

will turn off. If the

code is not valid, the

INDICATOR LIGHT

will blink. Check the

code list and repeat pro-

cess.

5. Aim the remote at

your DBS system and

press the

ON•OFF button. Your

DBS system should turn

off.

6. With your DBS System on, press

CHAN+ (CHANNEL UP). If the satellite

system responds, no further programming

is required.

NOTE: If your DBS system does not

respond, try all the codes for your brand. If

the codes do not work, or your brand is not

listed, try the Code Search method.

7. Enter your code here for easy reference.

SATELLITE CODE

CHAN +

ON•OFF

12 3

4 5 6

7 8 9

(OFF)

(BLINK)

INDICATOR

LIGHT

SAT

CODE

Programming For Cable

1. Manually turn on the Cable Box.

Find the three digit code for your Cable Box

in the code list below.

2. Press and hold

the CODE SEARCH

button until the

INDICATOR LIGHT

lights, then release the

CODE SEARCH but-

ton.

3. Press and release

the CBL button (The

INDICATOR LIGHT

will blink then

remain lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

INDICATOR LIGHT

will turn off. If the

code is not valid, the

INDICATOR LIGHT

will blink. Check the

code list and repeat

process.

5. Aim the remote at

your CABLE and press

the ON•OFF button.

Your CABLE should

turn off.

6. With your Cable Box on, press CHAN+

(CHANNEL UP). If the Cable Box responds,

no further programming is required.

NOTE: If your Cable Box does not respond,

try all the codes for your brand. If the codes

do not work, or your brand is not listed, try

the Code Search method.

7. Enter your code here for easy reference.

CABLE BOX CODE

CHAN +

ON•OFF

12 3

4 5 6

7 8 9

(OFF)

(BLINK)

INDICATOR

LIGHT

CABLE

CODE

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels GE Télécommande universelle

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

Sky

Sky MY Manuel utilisateur

RCA

RCA RCU600M - Universal Remote Control Manuel utilisateur

Savant

Savant SUR-0500 Guide de référence rapide

GDI

GDI GDI-WT2K Manuel utilisateur