GE RM24918 Manuel utilisateur

Universal Remote

Instruction Manual

RM24918

RM84918

Congratulations on your purchase of the RM24918

Universal Remote Control. The RM24918 is one

of the most easy to use remote controls available

today. With the RM24918, juggling multiple remote

controls is a thing of the past! Your RM24918

controls up to six devices, including the most

popular brands of TV, VCR, DVD, SAT, CBL, and

audio equipment.

The RM24918’s BACKLIGHT button lights up the

remote’s buttons, which stay lit until 5 seconds

after you stop pressing buttons.

Note: Some functions from your original remote

may not be controlled by this remote. Use the

original remote, if available, to control such

functions. Sometimes buttons other than described

in these instructions may actually perform the

function. For example, the CHAN and VOL

buttons might be used to navigate through menu

choices. We recommend you experiment with the

remote to identify if such situations pertain to your

equipment.

Table of Contents

Setup ..................................................................... 3

Battery Installation............................................ 3

Battery Saver.................................................... 3

Code Saver ...................................................... 3

Code Setup ...................................................... 3

Button Functions.................................................... 4

DVD Functions ................................................. 6

SAT Functions .................................................. 7

Code Entry............................................................. 8

Direct Code Entry ............................................. 8

Code Search .................................................... 9

Using Your Remote.............................................. 10

 CodeIdentication.......................................... 10

Controlling Devices with Power On and Off ... 11

Controlling Combo Devices............................ 11

VCR/DVD/DVR Punch-Through..................... 11

Volume/Mute Control and Punch-Through ..... 12

All Volume/Mute Control to any one Mode ..... 12

Setting any Mode for its own Volume/Mute .... 13

Troubleshooting................................................... 14

Battery Installation

1. On the back of the remote, push down on the

tab and lift the cover off.

2. Match the batteries to the + and - marks inside

the battery case, then insert 2 AAA Alkaline

batteries.

3. Press the battery cover back into place.

Battery Saver

Your remote automatically turns off if the buttons

are depressed more than 30 seconds. This will

save your batteries should your remote get stuck in

a place where the buttons remain depressed (e.g.,

between the sofa cushions).

Code Saver

You will have up to 10 minutes to change the

batteries in your remote without losing codes you

have programmed. However, do not press any

buttons until batteries are installed in the remote.

If buttons are pressed without batteries in the

remote, all codes will be lost.

Code Setup

The CODE SEARCH button is used to setup

the remote. You can either setup the remote

using the code for your brand of product, from

the code tables (on separate sheet), or you can

searchthroughthelibraryofcodesuntilyounda

code that works for your product. Please refer to

“Programming with Code Search” page 9 for more

information on using the code search feature to

learn how to search through the library of codes

for your products. NOTE: You can store any kind

of code under any mode (except TV). I.E. you can

store a VCR code under the CBL/SAT button, or

a DVD code under the VCR button, etc. However,

you can only store TV codes under the TV button.

Setup

CODE SEARCH

For setup.

RECORD, PLAY, STOP,

REW, FF, PAUSE VCR

control buttons operate your

VCR even when the remote

is set to operate the TV.

Also operates DVD Scan

-/+. Note the VCR keys also

control DVD when in DVD

Mode.

INPUT

For some TVs, press

repeatedly to select

from available viewing

sources (antenna,

cable box, VCR, etc.).

Some buttons on the remote might have functions that

are referred to by different names on the device you

are controlling. E.G. PREV.CH may be called RECALL,

or ENTER may be called DISPLAY. These differences

depend on the brand and model of your product. Also,

this remote can only operate features that exist on your

product. E.G., your product must have PREV.CH ability

for the PREV.CH button to operate this feature.

ENTER

For some TV models,

used after direct chan-

nel number

entry to immediately

change to the

selected channel.

TV, VCR, etc.

Selects product

to be operated.

Red Indicator

Lights when any but-

ton is pressed.

PREV.CH Returns to

the previously selected

channel, or DVD repeat

toggle. REPEAT performs

DVD players “A-B Repeat”

(or RPT A.B) function for

repeat play of current

Chapter or Track.

GUIDE displays satellite or cable

on-screen program guide.

Selects the on-

screen menu.

Button Functions

VOLUME UP/DOWN

Changes the volume

level of the product,

normally the TV.

CC (SUBTITLE)

TV Closed Caption

(if your TV has this

feature) or DVD

Subtitle toggle.

NUMBERS

Enter numbers for direct

channel selection. Some

products require ENTER

to be pressed after chan-

nel selection.

ON•OFF Turns

product On or

Off.

MUTE Turns off the

TV sound while the

picture remains.

OK Selects menu

items for the device

you are controlling.

CHANNEL Up/Down

Changes the channels

TRACK +/- controls

DVD/CD track selection

i.e. DVD/CD Track Skip

Up/Down (in DVD and

CD modes).

RESUME, AUDIO,

ZOOM, ANGLE, TITLE

Controls DVD functions.

Button Functions, cont.

Note: The REC button must be pressed TWICE to record

from your VCR. For some brands of VCRs, you might

need to press the REC button once, then press it again

for three seconds.

INFO/DISPLAY button

brings up DVD Display or

Control Menu for Chapter/

Track/Title number, Time re-

maining/elapsed indication,

system information, etc.

Turns

Backlight

on and off.

This remote has several dedicated buttons used

for DVD functions. The descriptions may vary from

your original remote descriptions.

SCAN+ and SCAN- buttons control the speed of

Fast Forward and Reverse Playback respectively.

SKIP (Channel Up & Down) buttons respectively

locate the succeeding or preceding Chapters or

Tracks on a disc.

SUBTITLE (CC) Turns the subtitles on or off.

TITLE Brings up the DVD Title Menu screen.

REPEAT A-B button performs DVD players “A-B

Repeat” (or RPT A.B) function for repeat play of

current Chapter or Track.

INFO/DISPLAY button brings up DVD Display or

Control Menu for Chapter/Track/Title number, Time

remaining/elapsed indication, system information,

etc.

MENU brings up the DVD disc Menu screen - use

with the UP, DOWN, LEFT & RIGHT navigation

buttons.

OK button is used for on-screen Menu selection.

Note some DVD players require the Play button to

be used.

EXIT Exit On-Screen Menus and/or Return to pre-

vious On-Screen selection.

PLAY button is used to start Disc playback and for

Menu selection on some DVD players.

STOP button stops Disc playback.

PAUSE button pauses Disc playback - press PLAY

to resume.

OPEN/CLOSE Opens or closes the disc tray.

+10 Use with digit keys to select tracks greater

than 10.

GUIDE/PROG Program the playback order of

chapters or tracks on your disc.

AUDIO selects the audio language or sound during

disc playback.

SETUP/INPUT brings up the DVD Players Setup

Menu.

RESUME Continues disc playback from where you

stopped (if supported by your DVD player).

ANGLE selects the viewing angle during disc

playback.

ZOOM Zoomorenlargeaspecicareaofthe

screen.

Note, not all DVD Players support all the functions

described above.

DVD Functions

GUIDE/PROG button displays on-screen Satellite

Channel Guide.

CHANNEL+ and CHANNEL- buttons perform the

“Page+” and “Page-” function for on-screen Guide

Menus used by some Satellite systems.

INFO/DISPLAY button brings up Satellite Display

screen for current Channel and system informa-

tion.

MENU brings up the Satellite Menu screen - use

with the UP, DOWN, LEFT & RIGHT navigation

buttons.

OK button is used for on-screen Menu selection.

EXIT button is used to Exit or Clear on-screen

Menu displays.

INPUT/SETUP button performs the Satellite TV/

SAT function.

SAT Functions

Direct Code Entry

Write your codes down here for easy reference

later.

1. Press and hold the CODE SEARCH

button until the red indicator stays on,

then release the CODE SEARCH button.

2. Press and release the desired mode

button (TV,VCR, etc.). The red indicator

blinks, then stays lit.

3. Enter the 4 digit code

from the code tables

(on separate sheet).

Note: after a valid

code entry, the red

indicator turns off. For

an invalid code, the

redindicatorashes.

4. With your device on, press ON•OFF.

If the device turns off, no further

programming is required. Note: If

some buttons do not operate your

equipment, try one of the other

codes for your brand.

Device Device stored Code

TV TV

DVD

VCR

CBL/SAT

AUDIO

AUX

Code Search

If your device does not respond after you have

tried all the codes for your brand, or if your brand is

not listed, try searching for your code by following

these steps.

1. Manually turn on the device (TV, VCR, etc.) to

be controlled.

2. Press and hold the CODE SEARCH

button until the red indicator stays

on, then release the CODE SEARCH

button.

3. Press and quickly release the desired

mode button (TV, VCR, etc.). The red

indicator blinks off once.

4. Press the ON•OFF button

repeatedly (up to 300 times) until

the device to be controlled turns

off. The red indicator blinks off

Most users will store VCR codes under the VCR

button, Cable codes under CABLE, etc. If (for

example) you want to store a VCR code under

CABLE,rstfollowtheprocedureforDirectCode

Entry (page 8) and press CABLE in step 2 of

Direct Code Entry, then enter ANY VCR code in

step 3 of Direct Code Entry. Then follow the steps

above for Code Search.

Note: If the device does not have a CHANNEL UP

button, use PLAY (VCR only) or POWER instead.

Code Search starts from the currently stored 4 digit

numberunderthatmode.Sometimestherstcode

that “works” with your device may only allow limited

functionality (e.g. the MENU button might not

work). There may be a code that performs more

functions. Continue the code search process until

the best code is found.

with each button press.

5. Press and release ENTER to install

the code.

Using Your Remote

Code Identication

TheCodeIdenticationFeatureallowsyouto

identify the 4 digit library code stored under your

devicekey.Forexample,ifyouwanttondout

what 4 digit code is stored under your TV device

key, follow the six steps below:

1. Press and hold the CODE SEARCH

button until the red indicator stays on.

Release the CODE SEARCH button.

2. Press and release the desired mode

button (TV, VCR, etc.). The red

indicator blinks, then stays lit.

3. Press and release the CODE

SEARCH button. The red indicator

blinks once and remains lit.

4. Tondtherstdigit

for the code stored

under the mode key

pressed in step 2,

press each numeric

key from 0-9 in turn.

The number that

causes the indicator

lighttoblinkistherst

digit in your code.

5. Tondtheseconddigit,repeatstep4,this

time when the red indicator blinks off this is the

second digit.

6. Repeatstep4tondthethirdandfourthdigits.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

Sky

Sky MY Manuel utilisateur

RCA

RCA RCU600M - Universal Remote Control Manuel utilisateur

Savant

Savant SUR-0500 Guide de référence rapide

GDI

GDI GDI-WT2K Manuel utilisateur