GE RM24940 Manuel utilisateur

24940 manual 8/19/03 9:04 AM Page 1

RM24940 & RM94940

Universal

Remote Control

INSTRUCTION

MANUAL

24940 manual 8/19/03 9:04 AM Page 2

Thank you for purchasing the GE Universal

Remote Control. This product is designed to

provide years of service operating a wide

variety of video and audio equipment.

Please retain this guide for future reference.

Install the Batteries . . . . . . . . . . . . . . . . . . .1

Clearing a Learned Function . . . . . . . . . . .5

. . . . . . . . . . . . . . . .7

. . . . . . . . . . . . . .10

Sleep Functions . . . . . . . . . . . . . . . . . . . . .13

. . . . . . .14

Table of Contents

Button Description . . . . . . . . . . . . . . . . . .2-3

Learning Function . . . . . . . . . . . . . . . . . . . .4

Clearing All Learned Buttons . . . . . . . . . . .5

Programming for TV . . . . . . . . . . . . . . . . . .6

Programming for VCR

Programming For DVD . . . . . . . . . . . . . . . .8

Programming For DBS System . . . . . . . . . .9

Programming For Cable

Programming For CD . . . . . . . . . . . . . . . .11

Programming For AUX 1 or AUX 2 . . . . .12

Programming With Code Search

Identifying Codes For Your Remote . . . . .14

Trouble Shooting . . . . . . . . . . . . . . . . . .15-16

This Universal Remote Control is already

programmed for most GE, RCA and ProScan

TVs, VCRs, DBS Systems, DVD Players, and

Audio/Video Receivers.

NOTE: For users of GE, RCA and ProScan

DBS Products, older DBS models require that

the DISPLAY Button on this remote be used

to make program selections. Use the SELECT

Button for making program selections on

newer GE, RCA and ProScan DBS models.

Battery Installation

Your Universal Remote Control requires 2

AAA alkaline batteries.

To install the batteries:

1. Turn the remote over and push down on

the cover and slide it off.

2. Insert the batteries, matching the batteries

to the (+) mark inside the battery case.

3. Slide the battery cover back into place.

NOTE: Programmed codes will remain in

memory for a short period of time allowing

for battery replacement. If batteries have

been dead for a prolonged period of time,

reprogramming may be required.

24940 manual 8/19/03 9:04 AM Page 3

Button Description

INDICATOR LIGHT

The Indicator Light flashes to show that the

remote is working.

ON•OFF

The ON•OFF button operates the same as

your original remote.

NOTE: Some GE, RCA and ProScan models

require you to press the device button to turn

the device on and the ON•OFF button to

turn the device off.

LEARN

The Learn button allows you to “record” and

“delete” “learned” functions from the origi-

nal or other remote controls.

TV, VCR, DVD, CD, AUX 1, AUX 2, CBL/SAT

These buttons are used to select the device

you want to control.

VOL & CHAN

The VOL (Volume) and CHAN (Channel)

buttons increase or decrease the channel

numbers or volume.The CHANNEL buttons

also control the SKIP functions for DVD and

CD Player.

MUTE

Mutes volume on the TV.

PREV CH

The PREV CH button allows you to go to the

previous channel you selected. Operates the

same as Last Channel, Go Back or Recall on

your original remote.

CODE SEARCH

Used to program the remote or to search

through codes.

GUIDE

Brings up the on-screen TV program guide if

your TV has that feature.

DISP

Display Button shows the date and the time if

your TV or VCR has that feature.

NAVIGATION BUTTONS & SELECT

Used to move through on-screen menuing

and guides. With some DBS models the DISP

button should be used to select the highlight-

ed item. Use the navigation buttons to move

the highlighted choice up, down, left or right.

24940 manual 8/19/03 9:04 AM Page 4

L1, L2, L3

The L1-L3 buttons are used for storing

learned functions from the original or other

remote controls.

Brings up the Main Menu. If you already in

the menu system, press SELECT to select a

highlighted choice. Use the arrows buttons to

move through the Menu Selection.

CLEAR

Removes the on screen display to return to

normal viewing.

0-9

The number buttons operates the same as on

your original remote, and are used for enter-

ing device codes.

ENTER

The ENTER button

is used to complete

channel selection

for some brands of

TV. It is also used to

complete the code

search process.

TV/VCR

The TV/VCR but-

ton operates the

TV/VCR function

of your TV.

REW, PLAY, FF,

REC, STOP, PAUSE

These buttons oper-

ate the same as on

your original VCR

or remote. You must

press the REC but-

ton twice to begin

recording. The REW

and FF buttons also

control the Reverse

and Forward func-

tions for DVD and

CD Player.

SLEEP

The SLEEP button

allows you to set a

time for you to turn

off your TV auto-

matically.

24940 manual 8/19/03 9:04 AM Page 5

CBL

AUDIO•AUX

Learning Function

The learning feature is used as a supplement to the stan-

dard preprogrammed library. the standar code library

provides most of the functions needed,, but you can add

additional functions from your original remote. Note:

No functions may be stored under the LEARN, SLEEP,

CODESEARCH, MENU or any of the device buttons.

1. Place the remote control unit and the Original remote

control unit so that they

face each other. They

should not be any more

than 2 inches apart.

2. Press and hold the

CODE SEARCH button

until the INDICATOR

LIGHT lights, then

release the CODE SEARCH

CODE

button.

2 inches

3. Press and release the desired

Mode button (TV, VCR,

CABLE, SAT, etc. . . .) The

INDICATOR LIGHT will blink

off once button press is accept-

ed.

4. Press and release the LEARN

button.

LIGHT

VCR TV

(BLINK)

INDICATOR

CBL/SAT

SAT DVD

5. Press and release the valid

button to be learned on the

94940 remote in which you will

store a new function. The L1, L2,

LEARN

L3 or any other button (except,

LEARN, CODE SEARCH, MENU,

OR device buttons) can be used to

store learned functions.

L1 L2 L3

6. Press and hold the button on the

or other button

original remote control until INDI-

CATOR LIGHT on the 94940

remote blinks once. Once the

INDICATOR LIGHT blinks you

BLINK

may continue with the next func-

tion.

If there is error in learning the

new function the INDICATOR

LIGHT will flash for 3 seconds but

remain in the learning mode.

CODE

Return to step 5 if the INDICA-

TOR LIGHT flashed.

NOTE: Hold the function key on

your original remote for at least 3

seconds for the command to be successfully learned.

7. Repeat steps 5 and 6 to store more functions.

8. Once the selected functions are stored press the CODE

SEARCH button and the remote will return to original

operation mode.

24940 manual 8/19/03 9:04 AM Page 6

CBL

AUDIO•AUX

(BLINK)

Clearing A Learned Button

To clear a learned button sequence, use the procedure

below. Note: No functions may be stored under the

LEARN, SLEEP, CODE

SEARCH or any of the device

CODE

buttons.

1. Press and hold the CODE

SEARCH button until the

INDICATOR LIGHT lights,

then release the CODE

SEARCH button.

2. Press and release the desired

Mode button (TV, VCR,

CABLE, SAT, etc. . . ). The

SAT DVD

INDICATOR LIGHT will blink

off once the button press is

accepted.

LIGHT

VCR TV

AUX

INDICATOR

CBL/SAT

LEARN

3. Press and release the LEARN

button twice. The INDICATOR

LIGHT will light off once the

button press is accepted.

CODE

4. Press and release the CODE

SEARCH button and the

remote will return to original

operation mode. All learned

command functions under the

device are now cleared.

Clearing All Learned Buttons

This procedure will erase all learned functions in every

device mode. This step is rec-

ommended when attempting

any learning of a new func-

tion from a new remote.

LIGHT

CODE

INDICATOR

1. Press and hold the CODE

SEARCH button until the

INDICATOR LIGHT lights,

LEARN

then release the CODE

SEARCH button.

2. Press and release the

LEARN button twice. The

CODE

INDICATOR LIGHT will

light off once the button press

is accepted.

3. Press and release the CODE SEARCH button and the

remote will return to original operation mode. All

learned command entries are now cleared.

24940 manual 8/19/03 9:04 AM Page 7

SETUP

Programming For TV

Most GE, RCA and ProScan TVs will not

require programming. Check to see if your

TV responds to the remote before you begin

programming.

1. Manually turn on the TV. Find the three

digit code for your TV in the code list at the

back of the instructions.

2. Press and hold the

CODE SEARCH button

CODE

until the INDICATOR

LIGHT lights, then

release the CODE

INDICATOR

LIGHT

SEARCH button.

3. Press and release

the TV button (The

INDICATOR LIGHT

will blink then

remain lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

INDICATOR LIGHT

will turn off. If the code

is not valid, the INDI-

CATOR LIGHT will

blink. Check the code

list and repeat process.

5. Aim the remote at

your TV and press the

ON•OFF button. Your

TV should turn off.

CHAN +

ON•OFF

1 2 3

4 5 6

7 8 9

(OFF)

(BLINK)

NOTE: If your TV does not respond, try all

the codes for your brand. If the codes do not

work, or your brand is not listed, try the

Code Search method on Page 12.

6. With your TV on, press CHAN+

(CHANNEL UP). If the TV responds,

no further programming is required.

7. Enter your code

here for easy

reference.

TV CODE

24940 manual 8/19/03 9:04 AM Page 8

SETUP

Programming For VCR

Most GE, RCA and ProScan VCRs will not

require programming. Check to see if your

VCR responds to the remote before you

begin programming.

1. Manually turn on

the VCR. Find the three

CODE

digit code for your VCR

at the back of the

instructions.

INDICATOR

LIGHT

2. Press and hold the

CODE SEARCH button

until the INDICATOR

LIGHT lights, then

release the CODE

SEARCH button.

3. Press and release the

VCR button (The INDI-

CATOR LIGHT will

blink then remain lit.

4. Enter the code using

the Number Buttons.

After your code is

entered, the INDICA-

TOR LIGHT will turn

off. If the code is not

valid, the INDICATOR

LIGHT will blink. Check

the code list and repeat

process.

CHAN +

ON•OFF

1 2 3

4 5 6

7 8 9

(OFF)

(BLINK)

VCR

5. Aim the remote at your VCR and press

the ON•OFF button. Your VCR should turn

off.

NOTE: If your VCR does not respond, try all

the codes for your brand. If the codes do not

work, or your brand is not listed,

try the Code Search method on Page 12.

6. With your VCR on, press CHAN+

(CHANNEL UP). If the VCR responds, no

further programming is required.

7. Enter your

code here for easy

reference.

VCR CODE

24940 manual 8/19/03 9:04 AM Page 9

CODE LIST

Programming For DVD

Most GE, RCA and ProScan DVD systems

will not require programming. Check to see

if your DVD system responds to the remote

before you begin programming.

1. Manually turn on the DVD system. Find

the three digit code for your DVD system at

the back of the instructions.

2. Press and hold the

CODE SEARCH button

until the INDICATOR

LIGHT lights, then

release the CODE

SEARCH button.

LIGHT

CODE

INDICATOR

3. Press and release

ON•OFF

1 2 3

4 5 6

7 8 9

DVD

the DVD button (The

INDICATOR LIGHT

will blink then remain

(BLINK)

lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

(OFF)

INDICATOR

LIGHT will turn off. If

the code is not valid,

the INDICATOR

LIGHT will blink.

Check the code list and

repeat process.

5. Aim the remote at your DVD system

and press the ON•OFF button. Your DVD

system should turn off.

6. If the DVD System responds, no further

programming is required.

NOTE: If your DVD does not respond, try

all the codes for your brand. If the codes do

not work, or your brand is not listed, try the

Code Search method on Page 12.

7. Enter your code

here for easy

reference.

DVD CODE

24940 manual 8/19/03 9:04 AM Page 10

SAT

Programming For DBS Satellite Sys.

Most GE, RCA and ProScan Satellite systems

will not require programming. Check to see

if your DBS Satellite system responds to the

remote before you begin programming.

1. Manually turn on the DBS system. Find

the three digit code for your DBS

system at the back of the instructions.

2. Press and hold the

CODE SEARCH button

until the INDICATOR

LIGHT lights, then

release the CODE

SEARCH button.

LIGHT

CODE

INDICATOR

3. Press and release

the CBL/SAT button

(The INDICATOR

LIGHT will blink then

remain lit.

4. Enter the code

using the Number

Buttons. After your

code is entered, the

INDICATOR LIGHT

will turn off. If the code

is not valid, the INDI-

CATOR LIGHT will

blink. Check the code

list and repeat process.

5. Aim the remote at

your DBS system and

press the ON•OFF but-

ton. Your DBS system

should turn off.

CHAN +

ON•OFF

1 2 3

4 5 6

7 8 9

(OFF)

(BLINK)

CBL/SAT

6. With your DBS System on, press

CHAN+ (CHANNEL UP). If the satellite

system responds, no further programming is

required.

NOTE: If your DBS system does not

respond, try all the codes for your brand. If

the codes do not work, or your brand is not

listed, try the Code Search method on Page

12.

7. Enter your code

here for easy

reference.

SATELLITE CODE

CBL/SAT CODE

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Manuels Télécommande universelle populaires d'autres marques

Pronto

Pronto Peel Manuel utilisateur

Radio Shack

Radio Shack Wireless Remote Control System Manuel utilisateur

AUVIO

AUVIO Universal Home Theater Remote Manuel utilisateur

Philips

Philips Icon SRU4106 Manuel utilisateur

THOMSON

THOMSON ROC4309 Manuel utilisateur

Philips

Philips pm625S Manuel utilisateur

RCA

RCA RCU600WMS - Universal Remote Control Manuel utilisateur

Blackweb

Blackweb BWB17AV002 Manuel utilisateur

Marmitek

Marmitek DoorGuard 300 Manuel utilisateur

Chunghop

Chunghop RM-L618 Manuel utilisateur

Anderic

Anderic KTN828 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. Touch Screen Remote Control Manuel utilisateur

Medion

Medion E74023 Manuel utilisateur

intensity

intensity RM02A Manuel utilisateur

Sky

Sky MY Manuel utilisateur

RCA

RCA RCU600M - Universal Remote Control Manuel utilisateur

Savant

Savant SUR-0500 Guide de référence rapide

GDI

GDI GDI-WT2K Manuel utilisateur