GCC Technologies Elite Color 16DN Manuel utilisateur

GETTING STARTED

GUIDE

Elite Color 16 Series

Getting Started Guide

What is this Guide?

This guide provides easy-to-follow instructions for unpacking, setting up and installing your

new GCC printer.

Where is the User’s Guide?

The comprehensive Elite Color 16 Series User’s Guide is located in Adobe Acrobat .pdf

format on your Elite Color 16 Series CD.

Can I access information from the GCC web site?

GCC product manuals, software installation instructions, the most current printer drivers,

FAQs, technology updates and a searchable database for technical questions are all located

in the Support Central section of GCC’s web site. Support Central can be accessed

directly at:

http://www.gccprinters.com/support

Installation Checklist

For proper installation, please complete each section in order:

Step 1 Check Package Contents

Step 2 Prepare Printer Location

Step 3 Remove Tape

Step 4 Install Drum Cartridge

Step 5 Install Toner Cartridges

Step 6 Load Paper Tray

Step 7 Connect Printer Cables

Step 8 Attach Power Cord

Step 9 Install Printing Software

Step 10 Verify Printer Setup

Note: No printer cables are included with the printer. For information on ordering cables, contact GCC

Direct Sales at 800 422-7777 (North America only; elsewhere consult the User’s Guide) or visit our web site

at: http://www.gccprinters.com

Step 1. Check Package Contents

Elite Color 16 Laser Printer Drum Cartridge

Power Cord

Customer Kit:

Elite Color 16 Series CD-ROM

Elite Color 16 Series Getting Started Guide

Elite Color 16 Series User’s Guide (On CD-ROM)

GCC Warranty Registration Card

Toner Cartridges

Note: Hold drum cartridge only by its sides when unpacking and handling. Use caution not to touch the

image roller within the cartridge, and avoid making contact with the protective sheet that covers the roller.

Doing so could cause scratches on the image roller and affect print quality.

Step 2. Prepare Printer Location

Select a location for the printer on a flat, level surface in a well-ventilated area away

from direct sunlight or areas where the air temperature and humidity can vary widely.

Do not obstruct the fan vent on the right side of the printer.

4”(100mm) 8”(200mm)

Minimum Recommended Clearances:

24”(600mm)

6”(150mm)

Top View

Side View

8”

(200mm)

24”(600mm)

Moving the printer

To lift the printer, face the front and back

of the printer and grip the recessed areas

at the bottom left and right with both

hands, as shown.

Do not try to lift the printer by gripping

any other areas. Doing so can cause the

printer to fall and could result in injury.

The printer weighs 76 lb (34.5 kg) with the tray and consumables installed, therefore

at least two people should carry it. Lift the printer as shown in the figure below.

Bend knees when lifting to avoid back injury. Keep the printer level when moving to

prevent trays and consumables from falling out.

Note: When unpacking the printer, retain the box and all packing materials, including the

wooden pallet that the printer ships with. You will require these materials if transporting

or shipping the printer in the future.

Step 3. Remove Tape

1. Remove the four pieces of tape on the

right side of the printer, as shown.

2. Remove the four pieces of tape on the

left side of the printer, as shown.

Step 4. Install Drum Cartridge

1. Press down on release button A to open

the front cover.

2. Open the Paper Outlet Cover inside the

printer, as shown.

3. Take the Drum Cartridge out of its

protective foil package and pull hard on

each of the four seals to remove them.

Pull the seals completely out.

Hold drum cartridge only by its sides

when unpacking and handling. Use caution

not to touch the image roller within the

cartridge, and avoid making contact with

the protective sheet that covers the roller.

Doing so could cause scratches on the

image roller and affect print quality.

4. Hold the left and right sides of the drum

cartridge and remove the protective cover

from it, as shown.

5. Remove the protective sheet from the

drum cartridge as shown. Do not touch

the image drum surface, as this can

damage the drum and deteriorate print

quality.

6. Hold the drum cartridge by its handle,

align its four shafts with the slots

indicated by arrows in the printer, and

gently lower it into the printer.

DO NOT TOUCH

ROLL SURFACE

7. Close the Paper Outlet Cover inside the

printer.

8. Close the front cover. Press on the

center part of the front cover until the

cover locks securely.

Autres manuels pour Elite Color 16DN

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels GCC Technologies Imprimante

GCC Technologies

GCC Technologies RX Series Manuel utilisateur

GCC Technologies

GCC Technologies LaserPro X500 III-80Y Manuel utilisateur

GCC Technologies

GCC Technologies 16 Manuel utilisateur

GCC Technologies

GCC Technologies Expert Pro Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite 12/1200N Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL 40 Manuel d'installation et d'exploitation

GCC Technologies

GCC Technologies Elite 12N Instructions de montage

GCC Technologies

GCC Technologies LaserPro C180II Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL-1208 Instructions d'installation et d'entretien

GCC Technologies

GCC Technologies Jaguar IV Series Manuel utilisateur

GCC Technologies

GCC Technologies puma iii series Manuel utilisateur

GCC Technologies

GCC Technologies 21 Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL 20ppm Manuel utilisateur

GCC Technologies

GCC Technologies Elite 21DN+ Manuel utilisateur

GCC Technologies

GCC Technologies Elite Color 16 series Mise à jour du firmware

GCC Technologies

GCC Technologies Elite 12N Instructions d'installation et d'entretien

GCC Technologies

GCC Technologies LaserPro StellarMark IFII Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite 12ppm Series Manuel utilisateur

GCC Technologies

GCC Technologies LaserPro Spirit Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL-1208 Manuel

GCC Technologies

GCC Technologies Spirit Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite 12/1200N Instructions de montage

GCC Technologies

GCC Technologies X500III Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL-20/600 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur