GCC Technologies Elite Color 16 series Mise à jour du firmware
GCC Elite Color 16 Series Printer
Software Installation Guide
Windows NT 4.0
Elite Color 16 Software Installation Guide (Windows NT 4.0) - 1
Software Installation
You will need to set up your Windows computer to use the Elite Color 16 Series by
installing the Elite Color 16 Series software for Windows. This software is on the Elite
Color 16 Series CD-ROM. The CD-ROM includes customized Adobe PostScript and
PCL Printer Driver files for the Elite Color 16 Series and screen fonts for each of the
resident PostScript printer fonts.
This document details installation instructions for installing software for Windows NT
4.0.
Note: We recommend that users install Windows NT 4.0 Service Pack 6 or later in
order to use this software. Earlier Service Pack revisions may not be compatible with
all software components.
Important: Read the release notes contained in the Read Me file before installing the
printer software. This file includes important last-minute feature and compatibility
information about the Elite Color 16 Series. This file is located on the Elite Color 16
Series CD-ROM.
Installing the Elite Color 16 Series with Windows NT 4.0
2 - Elite Color 16 Software Installation Guide (Windows NT 4.0)
1. Go to the Start menu, then up to Settings
and select Control Panels. Open the
Nework control panel, and click on the
“Services” tab.
Under the list of Network Services, check
for “Microsoft TCP/IP Printing.” If it is
already present, click “Cancel” and
proceed with the GCC software
installation steps starting on Page 4.
If “Microsoft TCP/IP Printing” is not
already on the list, click “Add.”
2. The Select Network Services window
opens. Scroll down the list of services
and highlight “Microsoft TCP/IP Printing.”
Click OK.
TCP/IP Users - Pre-Installation Note
In order to access your printer over TCP/IP from a Windows NT 4.0 system, the Windows system must
first have Microsoft’s TCP/IP Printing Service installed. Before running the GCC software installation,
follow these steps to make sure this Network Service is installed on your system.
Elite Color 16 Software Installation Guide (Windows NT 4.0) - 3
3. A dialog will open telling you that some
Windows NT files are needed. These files
are located in the “i386”folder on your
Windows NT CD.
Insert your Windows NT CD, check that
the directory path at the bottom of the
window is correct for your CD drive, and
click “Continue.”
4. The necessary files will copy from your
Windows NT CD and you will be
returned to the Network control panel.
“Microsoft TCP/IP Printing”should now
appear as an option on the list of
Network Services.
Click “Close.”
You can now insert the Elite Color 16
Series CD into the PC and proceed with
the GCC software installatons, as outlined
starting on the next page.
4 - Elite Color 16 Software Installation Guide (Windows NT 4.0)
The GCC Menus Application
1. Insert the Elite Color 16 Series CD-ROM
into the computer. The “GCC Menus”
application should automatically start up.
Read the information on the Introduction
screen, then click the “Enter”button to
proceed.
2. A window will open displaying the
Software License Agreement for the
software you are about to install. Read
the agreement, then click “Agree”to agree
to its terms and continue.
3. The next window asks you to register
your printer online. Click “Register”to
open a browser window and access
GCC’s online registration page.
Please complete the registration
information on the page, then close the
browser window to proceed.
Elite Color 16 Software Installation Guide (Windows NT 4.0) - 5
1. The GCC Menus window should proceed
to the main menu window. This window
contains options for viewing release notes
and manuals, browsing the CD, accessing
GCC’s web site and installing software.
Click the “Printer Software”button to
proceed with the software installation.
2. The Software window will appear. This
window contains options to install TCP/IP
Printer Port software, PostScript drivers,
Adobe Type Manager, and Fonts.
Each software category’s button has a
check box on it. Check the boxes for
each of the software components that you
wish to install.
Click the “Next”button to proceed to the
first installation.
Installing the GCC Printing Software Components
Instructions for the individual installations are found within this guide as follows:
Installation #1 (TCP/IP Printer Port) . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6
Installation #2 (PostScript Driver) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8
Installation #3 (Adobe Type Manager) . . . . . . . . . . . . . . . . . . . . . . . . . .Page 13
Installation #4 (Fonts) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 18
6 - Elite Color 16 Software Installation Guide (Windows NT 4.0)
1. The first installation window to appear is
for the TCP/IP Port software.
Note: If you did not select the TCP/IP
Printer Port software check box from the
main Software menu, this window will not
appear. Skip to Installation #2 - PS Driver.
Read the information in the left-hand
window, then click the “Next”button to
begin the installation.
2. The next window will ask you to enter
the printer’s IP address. Type in the
address, then click “Next”to continue.
Consult the “Interface Menu”section on
Page 7-11 of the Elite Color 16 Series
User’s Guide for information on setting
the printer’s IP address and other network
settings.
3. The next window asks for a port name.
This will determine how the port appears
on the list of available ports on the PC.
You can leave the default name, or type in
a more distinctive name.
Installation #1 - TCP/IP Printer Port
Elite Color 16 Software Installation Guide (Windows NT 4.0) - 7
4. A window will appear, informing you that
a TCP/IP port has been added to the
system. Click “OK.”
You will be returned to the GCC Menus
application, ready for the next installation.
8 - Elite Color 16 Software Installation Guide (Windows NT 4.0)
1. The next installation window to appear is
for the PostScript (PS) Driver software.
Note: If you did not select the PostScript
Driver software check box from the main
Software menu, this window will not
appear. Skip to Installation #3 - Adobe
Type Manager.
Click the top button to review the
ReadMe file for this software, then click
the “Next”button to begin the
installation.
2. This printer uses the Adobe PostScript
Driver software. A splash screen for
Adobe’s driver installation will appear.
3. The Welcome window will appear. Quit
all applications (except for the GCC
Menus application) if you have not already
done so, then click “Next”to proceed.
Installation #2 -PostScript (PS) Driver Software
Elite Color 16 Software Installation Guide (Windows NT 4.0) - 9
4. The End User License Agreement for the
Adobe software will appear. Read the
agreement and click “Accept”to continue.
5. The next window will ask if the printer is
directly connected to your computer, or is
on the network Click “Local Printer”
at this point, even if connecting to
the printer via TCP/IP Printer Port.
The TCP/IP port you added earlier will
appear as a local printer port.
“Network Printer”should only be
selected at this point if the printer is
directly attached to another PC or
accessed via an NT or Win2000 server.
Click “Next.”
6. Select the port that the computer is to be
attached to. The list of available ports will
vary depending on your PC’s configuration
and the version of Windows in use. If you
installed a TCP/IP Printer Port in
Installation #1, this port should appear as
an option on this list. Click “Next.”
Autres manuels pour Elite Color 16 series
3
Table des matières
Autres manuels GCC Technologies Imprimante
GCC Technologies
GCC Technologies Elite Color 16 series Mise à jour du firmware
GCC Technologies
GCC Technologies LaserPro C180II Manuel utilisateur
GCC Technologies
GCC Technologies puma iii series Manuel utilisateur
GCC Technologies
GCC Technologies 21 Series Manuel utilisateur
GCC Technologies
GCC Technologies Elite 1212 Mode d’emploi
GCC Technologies
GCC Technologies Elite XL-20/1200 Instructions d'installation et d'entretien
GCC Technologies
GCC Technologies JF-2418UV Manuel utilisateur
GCC Technologies
GCC Technologies JF-240UV Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL Manuel utilisateur
GCC Technologies
GCC Technologies Elite 12ppm Series Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL-1208S Manuel
GCC Technologies
GCC Technologies Elite 21DN+ Manuel utilisateur
GCC Technologies
GCC Technologies Elite 12N Instructions de montage
GCC Technologies
GCC Technologies LaserPro X500 III-80Y Manuel utilisateur
GCC Technologies
GCC Technologies Expert Pro Series Manuel utilisateur
GCC Technologies
GCC Technologies Elite Color 16 series Mise à jour du firmware
GCC Technologies
GCC Technologies T500 Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL 20ppm Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL-20/1200 Instructions de montage
GCC Technologies
GCC Technologies Elite Color 16DN Mise à jour du firmware
