GCC Technologies Elite Color 16DN Mise à jour du firmware
GCC Elite Color 16 Series Printer
Software Installation Guide
Macintosh - OS 9.x and earlier
2 - Elite Color 16 Software Installation Guide (Macintosh 9.x)
Software Installation
You will need to set up your Macintosh computer to use the Elite Color 16 Series by
installing the Elite Color 16 Series software for Macintosh.This software is on the Elite
Color 16 Series CD-ROM.The CD-ROM includes customized PostScript Printer
Description (PPD) files for the Elite Color 16 Series, ColorSync ICC profile and screen
fonts for each of the resident PostScript printer fonts.
This document details installation instructions for installing drivers for Mac OS versions
9.x and earlier.
Important: Read the release notes contained in the Read Me file before installing the
printer software.This file includes important last-minute feature and compatibility
information about the Elite Color 16 Series.This file is located on the Elite Color 16
Series CD-ROM.
Installing the Elite Color 16 with Mac OS 9.x and Earlier
Elite Color 16 Software Installation Guide (Macintosh 9.x) - 3
1. Insert the Elite Color16 Series CD-ROM
into the computer and double-click the
CD icon to open the disk. Double-click
the “Elite Color 16 Series Installer” icon
within the disk window.
2. An introduction screen marked
“Macintosh Printer Installation” will
appear. Click “Continue.”
3. The software license agreement will
appear. Read the agreement and click
“Accept” to accept its terms.
Part 1- Installing the GCC Printing Software and Fonts
4 - Elite Color 16 Software Installation Guide (Macintosh 9.x)
4. A window will open displaying the
ReadMe file for the software. Read the
information in this file and click
“Continue”to proceed.
5. A window will appear listing the
components that will be installed and
asking for an Install Location. Choose the
disk that you wish to install the software
onto (the startup disk of the Mac in most
cases) and click “Install.”
6. A Custom Install option is also available. If
you only wish to install certain
components of the printing software, click
on the Easy Install popup menu and select
Custom Install. Select the items you wish
to install by clicking on the check boxes
next to them, and click “Install.”
An Uninstall option is also accessible
through this menu and can be used to
remove the software as needed.
Elite Color 16 Software Installation Guide (Macintosh 9.x) - 5
7. Installation of the files will begin. A status
window will appear showing the progress
of the installation.
8. When the installation is complete, a dialog
box will appear asking if you want to
setup a Desktop Printer. Click “Ye s ”to
setup the printer.
9. A dialog box asking how the printer is
connected will appear. Make sure the
printer is turned on and connected
properly. Select the connection method
being used for the printer (AppleTalk, USB
or LPR) and click “Setup Printer.”
6 - Elite Color 16 Software Installation Guide (Macintosh 9.x)
11. When the printer is setup, a Product
Registration screen will appear. You can
choose to register the printer over the
web, which will access a registration form
via your web browser. You can also
choose to register the printer by mail, e-
mail or fax. Select the registration method
you prefer and follow the instructions on-
screen for registering the printer.
12. When the printer is setup, the installation
will finish. Click “Quit”to exit the
installer.
10. Clicking the “Setup Printer”button will open either Apple’s Desktop Printer Utility (USB
or LPR connections) or the Chooser (AppleTalk connections) in order to setup the
printer. Refer to the instructions for Creating a Desktop Printer, covered in Part 2 of the
Macintosh installation instructions in this guide as follows:
Connecting via AppleTalk: Part 2a, Page 7
Connecting via USB: Part 2b, Page 11
Connecting via LPR: Part 2b, Page 14
Elite Color 16 Software Installation Guide (Macintosh 9.x) - 7
Part 2a - Creating a Desktop Printer (via AppleTalk)
1. Confirm that the Macintosh is properly
configured to communicate over
EtherTalk. Go to the Apple menu, then to
Control Panels and to AppleTalk. In the
AppleTalk window, confirm that the
“Connect via:”selection is set to Ethernet.
Close the control panel. Click Save if
prompted to save settings.
2. Make sure that all steps in the Hardware
Setup section of the Elite Color 16 Series
Getting Started Guide have been followed.
Follow the Macintosh installation steps in
Part 1 of this section. In Step 9, select
“AppleTalk”as the connection method and
click “Setup Printer.”
Due to potential incompatibilities between Apple’s Desktop Printer Utility and certain AppleTalk
networks, GCC does not recommend using the Apple Desktop Printer Utility to set up the Elite Color
16 Series printer over AppleTalk. As a result, the Elite Color 16 Series software uses the Chooser to set
up the printer over AppleTalk rather than the Desktop Printer Utility. Follow these steps to setup your
printer over an AppleTalk connection.
8 - Elite Color 16 Software Installation Guide (Macintosh 9.x)
3. This will open up the Chooser window.
Click on the LaserWriter 8 icon in the left-
hand Chooser window. A list of AppleTalk
compatible printers will appear on the
right. Click on the name of your printer
from the list. The default printer name will
be “Elite Color 16 Series”with a six-digit
number appended.. Click “Create.”
4. The Chooser will open a connection to the
printer and attempt to select the proper
PPD file for the printer.
5. A “Select a PostScript Printer Description
File”dialog may appear. Click on “Elite
Color 16 Series”from this list and click
“Select.”
Elite Color 16 Software Installation Guide (Macintosh 9.x) - 9
6. The Setup process will continue. A status
bar will show the progress of the setup.
7. A window will appear asking for any
options on the printer to be configured.
The page of options sets the Memory
Configuration and High Capacity Feeder
status. Set these items using the popup
menus and then click “OK.”
8. The setup will finish. A status window will
indicate that a Desktop Printer is being
built.
10 - Elite Color 16 Software Installation Guide (Macintosh 9.x)
9. When complete, a Desktop Printer icon
for the Elite Color 16 will appear on the
Mac’s desktop. The setup is now complete.
If this is the only printer installed on the
Mac, it will appear with a bold outline
around it, indicating that this is the default
printer for the computer. You can set the
printer as the default by clicking once on
the Desktop Printer icon to highlight it,
then going up to the Printing menu at the
top of the screen and selecting “Set Default
Printer.”
The GCC Product Registration utility will
run after the printer is setup. Please follow
the registration instructions to register
your printer.
Autres manuels pour Elite Color 16DN
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels GCC Technologies Imprimante
GCC Technologies
GCC Technologies Elite 21DN Manuel utilisateur
GCC Technologies
GCC Technologies X500III Manuel utilisateur
GCC Technologies
GCC Technologies Elite 12/1200N Instructions de montage
GCC Technologies
GCC Technologies Elite XL-20/1200 Instructions de montage
GCC Technologies
GCC Technologies Elite 21DN Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL-20/1200 Instructions d'installation et d'entretien
GCC Technologies
GCC Technologies Elite XL Manuel utilisateur
GCC Technologies
GCC Technologies Elite 12ppm Series Manuel utilisateur
GCC Technologies
GCC Technologies Elite 12/1200N Manuel utilisateur
GCC Technologies
GCC Technologies Elite 12N Instructions de montage
GCC Technologies
GCC Technologies puma iii series Manuel utilisateur
GCC Technologies
GCC Technologies JF-240UV Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL-20/600 Manuel utilisateur
GCC Technologies
GCC Technologies Spirit Series Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL-1208S Manuel
GCC Technologies
GCC Technologies Elite Color 16 series Mise à jour du firmware
GCC Technologies
GCC Technologies Elite 21DN+ Manuel utilisateur
GCC Technologies
GCC Technologies Elite XL-1208 Manuel
GCC Technologies
GCC Technologies Elite XL-1208 Instructions d'installation et d'entretien
GCC Technologies
GCC Technologies RX Series Manuel utilisateur
