GCC Technologies Puma iii series Manuel utilisateur

V.11 2013 Jul.

Puma III Series

User Manual

http://www.GCCworld.com

V.11 2013 Jul.

NOTICE

GCC reserves the right to modify the information contained in this user

manual at any time without prior notice; un-authorized modification, copying

distribution or display is prohibited. All comments, queries or

suggestions concerning this manual please consult with your local dealer.

Puma III User Manual

Important Information

PRECAUTIONS IN USE

For safety concern, please always hold the cutter firmly from the bottom

when moving it. Do not move the cutter by clasping the depression area on

both sides.

Do not shake or drop the blade holder, a blade tip maybe fly out.

During operation, keep away from any moving parts of the cutter (such as

the carriage, drums). Also be careful that your clothing and hairs do not be

caught.

Always connect the power cable to a grounded outlet.

Always use the accessory power cable that is provided. Do not wire the

power cable so that it becomes bent or caught between objects.

Do not connect the power cable to branching outlet to which other

machines are also connected, or use an extension cable. There is danger

of overheating and of misoperation of the machine.

Keep the tools away from children where they can reach.

Always put the pinch rollers within position of the white marks.

Thanks for your purchase of GCC Puma III Cutting Plotter. For your

safety and to optimize the performance of the Puma III, please read

the user manual completely and keep it in a correct location.

Puma III User Manual

Contents

Important Information

1. General Information

1.1 Introduction 1-1

1.2 Package Items 1-1

1.3 Product Features 1-2

1.4 Front View of Puma III 1-3

1.5 Back View of Puma III 1-4

1.6 The Whole View of Puma III 1-4

1.7 The Left-hand Side of Puma III 1-5

1.8 The Right-hand Side of Puma III 1-5

2. Installation

2.1 Precaution 2-1

2.2 Stand & Flexible Media Support System 2-2

2.2.1 Stand Installation (for P3-60) 2-2

2.2.2 Stand & Flexible Media Support System (for P3-132S) 2-3

2.3 Blade Installation 2-6

2.4 Cable Connections 2-9

2.4.1 USB Interface 2-9

2.4.2 Driver Un-installation 2-12

2.4.3 RS-232 Interface 2-15

2.4.4 Data Transmitting 2-16

2.4.5 Printer Server Shared Setting 2-16

3. The Control Panel

3.1 The LCD Panel 3-1

3.2 Menu in On-line Mode 3-2

3.3 Menu in Off-line Mode 3-3

3.4 Menu Items 3-4

4. Operation

4.1 Media Loading 4-1

4.1.1 Loading the Sheet Media 4-1

4.1.2 Loading the Roll Media 4-3

4.2 Tracking Performance 4-6

4.3 Cutting Force and Offset Adjustment 4-6

4.4 When Completing the Cutting Job 4-8

4.5 Puma III Print Driver setting 4-9

4.5.1 Puma III Print Driver setting>Option Page 4-9

4.6 Reference Parameter setting for different materials 4-11

5. Automatic-Aligning System

5.1 Introduction 5-1

5.2 Calibrating the System 5-1

5.2.1 Media Calibration 5-1

5.2.2 AAS Calibration 5-2

5.2.3 AAS II on Puma III 5-3

Puma III User Manual

Contents

5.3 Printer Test 5-4

5-6

5.4 Registration Mark Offset Range

5.5 Contour Cutting

5-6

5.6 Tips for AAS 5-8

6. Maintenance

6.1 Cleaning the cutting Plotter 6-1

6.2 Cleaning the Grid Drum 6-2

6.3 Cleaning the Pinch Rollers 6-2

7. Trouble Shooting

7.1 Non-Operational Problems 7-1

7.2 Operational Problems 7-2

7.3 Communication Problems 7-3

7.4 Software Problems 7-4

7.5 Cutting Quality Problems 7-5

Appendix

A-1

Specifications of Puma III A-1

A-2

Blade Specification A-2

A-3 CorelDRAW Plug-In Instruction A-3

A-4 SignPal 10.5 Instruction A-4

A-5 EasySIGN Instruction A-5

A-6 GreatCut Instruction A-6

A-7 Illustrator Plug-In Instruction A-7

A-8 DirectCut A-8

Puma III User Manual

General Information 1-1

Chapter 1 General Information

1.1 Introduction

Puma III series cutting plotters have been designed to produce computer-generated images

or perform contour cutting on sheets or rolls of vinyl media.

This manual covers the following models of Puma III series cutting plotters:

‧P3-60 for media width: 70mm(2.76”) ~ 719mm(28.3”)

‧P3-132S for media width: 70mm(2.76”) ~ 1470mm(57.87”)

1.2 Package Items

The package of the Puma III model contents the items listed below, please check carefully.

If you find any item missing, please consult your local dealer for further assistance.

1. Cutting Plotter 1

2. Stand Set ( for P3-132S only, optional for P3-60)

2 piece of T-shape stand

1 piece of stand beam

20 pieces of M6 screws

1 piece of M5 L-shape hexagon screw driver

1 piece of Installation Guide for Stand Set

3. Flexible Media Support System Package

Items P3-60 P3-132S

1 set of Roll Media Flange (2 pieces) V

1 set of Roll Holder (2 pieces) V

1 set of Roll Holder Guide Bushes (4 pieces) V

1 set of Roll Holder Support (2 pieces) V

32 pieces of M6 screws V

1 piece of M6 L-shape hexagon screw driver V

1 piece of Roll Base V

Puma III User Manual

General Information 1-2

4. Accessories

1 piece of User’s Compact Disk

1 piece of AC power Cord

1 pieces of data cable (RS-232C)

1 pieces of data cable (USB cable: 3m)

1 set of Blade Holder Assembly (Installed in tool carriage of the cutting

plotter )

1 piece of Blade (Installed in Blade Holder)

1 piece of Safe Blade

1 piece of Cutting Pad

1 piece of Tweezers

1 piece of Promise Card

1.3 Product Features

The following are the main features of the Puma III series cutting plotters:

‧Dual-port connectivity provides you with greater flexibility

‧Up to 400-gram cutting force

‧Up to 600mm/per second cutting speed

‧Guaranty 3-meter tracking

‧User-friendly, multi-language control panel

‧Enhanced Automatic-Aligning System for automatic contour cutting

Puma III User Manual

General Information 1-3

1.4 Appearance of Puma III

1.4.1 The Front View (Figure 1-1)

Control Panel

14 buttons and 1

LED and 1 LCM

showing messages

and menus.

Cutting Pad

provides the protection of

blade when the blade is

cutting.

Tool Carriage

performs the

cutting with the

installed blade or

pen with AAS

module.

Alignment Rulers

media can be aligned

with the clear guide line

marks

Grid Drums

move the media back and

forth during operation.

Slicer Groove

cuts

off the extra

media easily along

this groove.

Platen

provides the surface for

supporting media while

cutting

Figure 1-1

Puma III User Manual

General Information 1-4

1.4.2 The Back View (Figure 1-2)

Pinch Rollers

hold the media during cutting.

Lever

raises or lowers

the pinch rollers.

Figure 1-2

Puma III User Manual

General Information 1-5

1.4.3 The Whole View (Figure 1-3)

**Stand for Puma III 60 is an optional item.

**Stand for Puma III 132S is a standard item.

Figure 1-3

Roll Holder

– holds

and supplies the roll

media for cutting.

Roll Holder Guide

Bushes

–

serve to

keep the roll media in

place when media is

pulled from the roll.

T-Stand

–

supports

the cutting plotter

Stand Beam

–

stabilizes the body.

Roll Holder

Support

–

supports

roll holders.

T-Stand

–

supports

the cutting plotter

Autres manuels pour puma iii series

Table des matières

Autres manuels GCC Technologies Imprimante

GCC Technologies

GCC Technologies Elite 12/1200N Manuel utilisateur

GCC Technologies

GCC Technologies Elite 12/1200N Instructions de montage

GCC Technologies

GCC Technologies LaserPro X500 III-80Y Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL-20/600 Manuel utilisateur

GCC Technologies

GCC Technologies Elite 12N Instructions de montage

GCC Technologies

GCC Technologies Elite Color 16 series Mise à jour du firmware

GCC Technologies

GCC Technologies Elite Color 16DN Manuel utilisateur

GCC Technologies

GCC Technologies 16 Manuel utilisateur

GCC Technologies

GCC Technologies LaserPro C180II Manuel utilisateur

GCC Technologies

GCC Technologies Elite 21DN+ Manuel utilisateur

GCC Technologies

GCC Technologies Elite Color 16 series Mise à jour du firmware

GCC Technologies

GCC Technologies Elite XL-20/1200 Instructions d'installation et d'entretien

GCC Technologies

GCC Technologies Elite 12ppm Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL 40 Manuel d'installation et d'exploitation

GCC Technologies

GCC Technologies RX Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL 20ppm Manuel utilisateur

GCC Technologies

GCC Technologies Expert Pro Series Manuel utilisateur

GCC Technologies

GCC Technologies X500III Manuel utilisateur

GCC Technologies

GCC Technologies Elite XL Manuel utilisateur

GCC Technologies

GCC Technologies Elite 12 Series Guide de démarrage rapide

GCC Technologies

GCC Technologies Jaguar IV Series Manuel utilisateur

GCC Technologies

GCC Technologies Elite 21DN Manuel utilisateur

GCC Technologies

GCC Technologies Elite Color 16 series Mise à jour du firmware

GCC Technologies

GCC Technologies Elite XL-1208 Instructions d'installation et d'entretien

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

GCC Technologies puma iii series Manuel utilisateur

Manuels Imprimante populaires d'autres marques