Fujitsu Eternus DX500 S3 Manuel technique
FUJITSU Storage
ETERNUS DX500 S3/DX600 S3
Disk storage system
Site Planning Guide
P3AM-7712-05ENZ0
This page is intentionally left blank.
Preface
Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage
system (hereinafter referred to as ETERNUS DX).
The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu M10, PRIMEQUEST, or PRIMERGY) or
non-Fujitsu servers.
This manual describes the environmental requirements that are necessary to install and use the ETERNUS
DX.
This manual is intended for use of the ETERNUS DX in regions other than Japan.
Please carefully review the information outlined in this manual.
Fifth Edition
December 2014
About This Manual
Organization
This manual is composed of the following two chapters:
•"Chapter 1 ETERNUS DX Installation" (page 11)
This chapter provides the installation specification of the ETERNUS DX.
•"Chapter 2 Rack Installation Specifications" (page 37)
This chapter provides the installation specification of racks.
3
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
Registered Trademarks and Trademarks
•All SPARC trademarks are used under license from SPARC International, Inc. and are trademarks or regis-
tered trademarks of that company in the United States and other countries.
•UNIX is a registered trademark of The Open Group in the United States and other countries.
•Microsoft, Windows, Windows Server, and Internet Explorer are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
•Oracle and Java are registered trademarks of Oracle and/or its affiliates.
•HP-UX is a trademark of Hewlett-Packard Company in the U.S. and other countries.
•Mozilla, Firefox, and the Mozilla and Firefox logos are trademarks or registered trademarks of the Mozilla
Foundation in the United States and other countries.
•Red Hat is a registered trademark of Red Hat, Inc. in the U.S. and other countries.
•Linux is a registered trademark of Linus Torvalds.
•SUSE is a registered trademark of Novell, Inc. in the United States and other countries.
•IBM, AIX, and Tivoli are trademarks of International Business Machines Corporation, registered in many ju-
risdictions worldwide.
•VMware, VMware logos, Virtual SMP, and vMotion are either registered trademarks or trademarks of
VMware, Inc. in the U.S. and/or other countries.
•ARCserve® products and logos are registered trademarks of CA Technologies.
•The company names, product names and service names mentioned in this document are registered trade-
marks or trademarks of their respective companies.
•Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Naming Conventions
■Product Names
•The following abbreviations are used for Microsoft® Windows Server®.
Product name Abbreviation
Microsoft® Windows Server® 2003, Datacenter Edition Windows Server 2003
Microsoft® Windows Server® 2003, Enterprise Edition
Microsoft® Windows Server® 2003, Standard Edition
Microsoft® Windows Server® 2008 Datacenter
Microsoft® Windows Server® 2008 R2 Datacenter
Windows Server 2008
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 R2 Enterprise
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 for Itanium-Based Systems
Microsoft® Windows Server® 2008 R2 for Itanium-Based Systems
Microsoft® Windows Server® 2008 HPC Edition
Microsoft® Windows Server® 2008 R2 HPC Edition
Preface
4
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
Product name Abbreviation
Microsoft® Windows Server® 2012 Datacenter
Microsoft® Windows Server® 2012 R2 Datacenter
Windows Server 2012
Microsoft® Windows Server® 2012 Standard
Microsoft® Windows Server® 2012 R2 Standard
Microsoft® Windows Server® 2012 Essentials
Microsoft® Windows Server® 2012 R2 Essentials
•The following abbreviations are used for Red Hat Linux.
Product name Abbreviation
Red Hat Enterprise Linux 5 (for x86)
Red Hat Enterprise Linux 5 (for Intel64)
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6 (for x86)
Red Hat Enterprise Linux 6 (for Intel64)
Red Hat Enterprise Linux 6
Red Hat Enterprise Linux 7 (for Intel 64) Red Hat Enterprise Linux 7
■Symbols Used in This Manual
The following symbol is used throughout this manual:
This indicates information for the user to note when using the ETERNUS DX. Please be
sure to read this information.
This indicates supplementary and reference information.
■Abbreviations Used in This Manual
•"ETERNUS DX500 S3" refers to the FUJITSU Storage ETERNUS DX500 S3 Disk storage system and "ETERNUS
DX600 S3" refers to the FUJITSU Storage ETERNUS DX600 S3 Disk storage system.
•"ETERNUS DX" refers to the ETERNUS DX500 S3 and ETERNUS DX600 S3 Disk storage systems.
•"CA" refers to a host interface module that is used in an ETERNUS DX to connect to a server.
•"Host Bus Adapter (HBA)" refers to the interface module that is normally used by the server to connect to
ETERNUS DX storage systems.
•Trademark symbols such as ™ and ® are omitted in this document.
Preface
5
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
Warning Signs
Warning signs are shown throughout this manual in order to prevent injury to the user and/or material dam-
age. These signs are composed of a symbol and a message describing the recommended level of caution.
The following explains the symbol, its level of caution, and its meaning as used in this manual.
This symbol indicates the possibility of serious or fatal injury if the ETERNUS DX is not
used properly.
This symbol indicates the possibility of minor or moderate personal injury, as well as
damage to the ETERNUS DX and/or to other users and their property, if the ETERNUS DX
is not used properly.
This symbol indicates IMPORTANT information for the user to note when using the ETER-
NUS DX.
The following symbols are used to indicate the type of warnings or cautions being described.
Electric Shock
The triangle emphasizes the urgency of the WARNING and CAUTION contents. Inside
the triangle and above it are details concerning the symbol (e.g. Electrical Shock).
No Disassembly
The barred "Do Not..." circle warns against certain actions. The action which must be
avoided is both illustrated inside the barred circle and written above it (e.g. No Disas-
sembly).
Unplug
The black "Must Do..." circle indicates actions that must be taken. The required ac-
tion is both illustrated inside the black disk and written above it (e.g. Unplug).
Preface
6
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
How Warnings are Presented in This Manual
A message is written beside the symbol indicating the caution level. This message is marked with a vertical
ribbon in the left margin, to distinguish this warning from ordinary descriptions.
A display example is shown here.
Warning level indicator
Warning type indicator
Warning details
•To avoid damaging the ETERNUS DX, pay attention to the following points
when cleaning the ETERNUS DX:
- Make sure to disconnect the power when cleaning.
- Be careful that no liquid seeps into the ETERNUS DX when using
cleaners, etc.
- Do not use alcohol or other solvents to clean the ETERNUS DX.
Warning layout ribbon
Example warning
CAUTION Do
Preface
7
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
Table of Contents
Chapter 1 ETERNUS DX Installation 11
1.1 Installation Specifications ............................................................................................................ 11
1.1.1 ETERNUS DX500 S3 .............................................................................................................................................11
1.1.2 ETERNUS DX600 S3 .............................................................................................................................................13
1.2 Storage System Dimensions ......................................................................................................... 15
1.3 Compliance Standards.................................................................................................................. 20
1.4 Package Size ................................................................................................................................ 21
1.5 Installation Area........................................................................................................................... 22
1.6 Installation Environment.............................................................................................................. 24
1.6.1 Air Conditioning..................................................................................................................................................24
1.6.2 Installation Methods...........................................................................................................................................25
1.6.3 Load Bearing Capacity for Floors.........................................................................................................................25
1.7 Outlet/Socket Specifications ......................................................................................................... 26
1.7.1 Specifications for Optional Power Supply Products..............................................................................................27
1.7.2 Required Number of Outlets/Sockets...................................................................................................................30
1.7.3 Circuit Protectors.................................................................................................................................................31
1.7.4 Input Power Supply Lines....................................................................................................................................35
Chapter 2 Rack Installation Specifications 37
2.1 Rack Installation Requirements.................................................................................................... 37
2.1.1 Placement in the Rack ........................................................................................................................................37
2.1.2 Cable Connection ................................................................................................................................................38
2.2 Installable Racks .......................................................................................................................... 48
2.2.1 Fujitsu Racks.......................................................................................................................................................48
2.2.2 Non-Fujitsu Racks ...............................................................................................................................................48
8
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
List of Figures
Figure 1.1 Controller Enclosure Dimensions..............................................................................................................15
Figure 1.2 2.5" Type Drive Enclosure Dimensions......................................................................................................16
Figure 1.3 3.5" Type Drive Enclosure Dimensions......................................................................................................17
Figure 1.4 High-density Drive Enclosure Dimensions ................................................................................................18
Figure 1.5 19-inch Rack Dimensions .........................................................................................................................19
Figure 1.6 Installation Area and Service Area............................................................................................................22
Figure 1.7 Installation and Service Areas (When a High-density Drive Enclosure is Installed_1)...............................22
Figure 1.8 Installation and Service Areas (When a High-density Drive Enclosure is Installed_2)...............................23
Figure 1.9 Service Area (When a High-density Drive Enclosure is Installed in the Top Part of the Rack) ...................23
Figure 1.10 Dimensions of the Location on a Floor in which a Rack is Secured ...........................................................25
Figure 1.11 Power Distribution Units (1U) ..................................................................................................................28
Figure 1.12 Power Distribution Units (2U) ..................................................................................................................29
Figure 1.13 Breaking Characteristics of Distribution Board Circuit Protectors ..............................................................32
Figure 1.14 Example of a Power Supply Connection When a Power Distribution Unit (1U) is Used .............................33
Figure 1.15 Example of a Power Supply Connection When a Power Distribution Unit (2U) is Used .............................34
Figure 1.16 Example of a Power Supply Connection When a Power Distribution Unit is not Used...............................35
Figure 1.17 Input Power Supply Lines (When Connecting to Power Sockets) ..............................................................35
Figure 1.18 Input Power Supply Lines (When Connecting to UPS)...............................................................................36
Figure 2.1 AC Cable Connection.................................................................................................................................38
Figure 2.2 Connection Example 1 (ETERNUS DX500 S3 Connections in the Same Rack)............................................40
Figure 2.3 Connection Example 2 (ETERNUS DX500 S3 Connections in the Same Rack)............................................41
Figure 2.4 Connection Example 3 (ETERNUS DX500 S3 Connections in the Same Rack)............................................42
Figure 2.5 Connection Example 4 (ETERNUS DX500 S3 Connections in Multiple Racks) ............................................43
Figure 2.6 Connection Example 1 (ETERNUS DX600 S3 Connections in the Same Rack)............................................44
Figure 2.7 Connection Example 2 (ETERNUS DX600 S3 Connections in the Same Rack)............................................45
Figure 2.8 Connection Example 3 (ETERNUS DX600 S3 Connections in the Same Rack)............................................46
Figure 2.9 Connection Example 4 (ETERNUS DX600 S3 Connections in Multiple Racks) ............................................47
Figure 2.10 Unit Installation Area ...............................................................................................................................49
9
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
List of Tables
Table 1.1 ETERNUS DX500 S3 Installation Specifications .........................................................................................11
Table 1.2 ETERNUS DX600 S3 Installation Specifications .........................................................................................13
Table 1.3 Package Size (for Regions other than EMEA&I) ........................................................................................21
Table 1.4 Rating of the Current for Each Power Cord................................................................................................26
Table 1.5 Specifications for AC200V Power Cords (for the EMEA&I Region)..............................................................27
Table 1.6 Specifications for AC200V Power Cords (for Regions Other than EMEA&I).................................................27
Table 1.7 Specifications for AC125V Power Cords (for Regions Other than EMEA&I).................................................28
Table 1.8 Specifications for Power Cords (for Regions Other than EMEA&I) .............................................................28
Table 1.9 Required Number of Outlets and Sockets to Install Power Distribution Units ...........................................28
Table 1.10 Power Distribution Unit (AC200-240V, 1U, 4 Outlets) Specifications ........................................................29
Table 1.11 Power Distribution Unit (AC200-240V, 2U, 12 Outlets) Specifications ......................................................29
Table 1.12 Power Distribution Unit (AC200-240V, 2U, 16 Outlets) Specifications ......................................................30
Table 1.13 Required Conditions for Distribution Board Circuit Protectors...................................................................31
Table 2.1 Enclosure Installation Order .....................................................................................................................37
Table 2.2 Usage of Cables for Connecting Enclosures...............................................................................................39
Table 2.3 Specifications for the Unit Installation Area .............................................................................................49
10
FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Site Planning Guide
Copyright 2014 FUJITSU LIMITED
P3AM-7712-05ENZ0
Autres manuels pour Eternus DX500 S3
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Fujitsu Stockage
Fujitsu
Fujitsu ETERNUS AF S3 Series Instructions de montage
Fujitsu
Fujitsu MPD3XXXAT Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 Manuel utilisateur
Fujitsu
Fujitsu MBA3300 NP SERIES Manuel utilisateur
Fujitsu
Fujitsu ETERNUS Mode d’emploi
Fujitsu
Fujitsu ETERNUS4000' ETERNUS8000 Mode d’emploi
Fujitsu
Fujitsu MPA3017AT Manuel utilisateur
Fujitsu
Fujitsu M2266S Note de version
Fujitsu
Fujitsu Eternus DX80 S2 Manuel utilisateur
Fujitsu
Fujitsu MBA3073NC Manuel utilisateur
Fujitsu
Fujitsu PG-HD9G1C Manuel utilisateur
Fujitsu
Fujitsu Eternus DX80 S2 Manuel utilisateur
Fujitsu
Fujitsu MAP3147NC - Enterprise - Hard Drive Manuel utilisateur
Fujitsu
Fujitsu MHY2200BS Manuel utilisateur
Fujitsu
Fujitsu eternus af Manuel utilisateur
Fujitsu
Fujitsu MAA3182FC Series Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX8100 S4 Manuel technique
Fujitsu
Fujitsu ETERNUS LT40 S2 Comment utiliser
Fujitsu
Fujitsu MAS3367FC Manuel utilisateur
Fujitsu
Fujitsu MAY2036RC Product/ Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur