Fujitsu ETERNUS DX60 Manuel utilisateur

Package Contents

P3AM-3062-03EN

Fujitsu would like to thank you for purchasing the ETERNUS DX60/DX80 Disk storage system (hereinafter referred to as

"ETERNUS DX60/DX80") and related options.

Use this document to check the contents of your ETERNUS DX60/DX80 and options packages shipment. If any items are found to

be missing, please contact your sales representative for help. Third Edition

October 2009

Checking the package contents for missing items

Check the contents of the ETERNUS DX60/DX80 and options packages shipment against the following list to con-

firm that there are no missing items.

•Store the package contents in a safe and secure location, as they may be needed again when making changes to the system

or reinstalling the software.

•Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.

❏ETERNUS DX60 and DX80 Base Unit Fibre Channel dual controller model

(ET06F22AU, ET08E22AU, ET08F22AU)

❏ETERNUS DX60 and DX80 Base Unit Fibre Channel single controller model

(ET06F12AU, ET08E12AU, ET08F12AU)

❏ETERNUS DX60 and DX80 Base Unit iSCSI dual controller model (ET06L22AU, ET08L22AU)

❏ETERNUS DX60 and DX80 Base Unit iSCSI single controller model (ET06L12AU, ET08L12AU)

❑Controller Enclosure (x 1)

❑Front cover (x 1)

❑Rack mount kit (*1) (x 1 set)

❑AC200V cables (x 2)

IEC320-C13 ↔NEMA L6-15P (4m)

❑Wrist strap (x 1)

❑Setup Guide (Fibre Channel model) (x 1)

❑Safety Precautions (x 1)

❑Package Contents (this manual) (x 1)

❑User Guide (Document CD) (x 1)

❑Network Settings sticker (x 1)

❑DE_No.Label (x 1)

❑Pin (x 1)

Used to adjust the Controller Enclosure's AUTO

POWER dip-switch

❑Guide of Initial User Accounts for

Fujitsu Support Engineers (x 1)

❑Controller Enclosure (x 1)

❑Front cover (x 1)

❑Rack mount kit (*1) (x 1 set)

❑AC200V cables (x 2)

IEC320-C13 ↔NEMA L6-15P (4m)

❑Wrist strap (x 1)

❑Setup Guide (iSCSI model) (x 1)

❑Safety Precautions (x 1)

❑Package Contents (this manual) (x 1)

❑User Guide (Document CD) (x 1)

❑Network Settings sticker (x 1)

❑DE_No.Label (x 1)

❑Pin (x 1)

Used to adjust the Controller Enclosure's AUTO

POWER dip-switch

❑Guide of Initial User Accounts for

Fujitsu Support Engineers (x 1)

Disk storage system

❏ETERNUS DX60 and DX80 Base Unit SAS dual controller model (ET06S22AU, ET08S22AU)

❏ETERNUS DX60 and DX80 Base Unit SAS single controller model (ET06S12AU, ET08S12AU)

❏Expansion Controller for ETERNUS DX60 Fibre Channel model (ETLC6F4AU)

❏Expansion Controller for ETERNUS DX80 Fibre Channel model (ETLC8F8AU, ETLC8F4AU)

❏Expansion Controller for ETERNUS DX60 iSCSI model (ETLC6L1AU)

❏Expansion Controller for ETERNUS DX80 iSCSI model (ETLC8L1AU)

❏Expansion Controller for ETERNUS DX60 SAS model (ETLC6S3AU)

❏Expansion Controller for ETERNUS DX80 SAS model (ETLC8S3AU)

❏3.5" Type Drive Enclosure dual expander model (ETLDE2AU)

❏3.5" Type Drive Enclosure single expander model (ETLDE1AU)

❏Expansion Expander (ETLEXAU)

❏3.5" One Disk Drive (ETLSA3HAU, ETLSA4HAU, ETLNS7HAU, ETLNS1HAU)

❏3.5" Two Disk Drives (ETLSA3MAU, ETLSA4MAU, ETLNS7MAU, ETLNS1MAU)

❏3.5" Four Disk Drives (ETLSA3PAU, ETLSA4PAU, ETLNS7PAU, ETLNS1PAU)

❑Controller Enclosure (x 1)

❑Front cover (x 1)

❑Rack mount kit (*1) (x 1 set)

❑AC200V cables (x 2)

IEC320-C13 ↔NEMA L6-15P (4m)

❑Wrist strap (x 1)

❑Setup Guide (SAS model) (x 1)

❑Safety Precautions (x 1)

❑Package Contents (this manual) (x 1)

❑User Guide (Document CD) (x 1)

❑Network Settings sticker (x 1)

❑DE_No.Label (x 1)

❑Pin (x 1)

Used to adjust the Controller Enclosure's AUTO

POWER dip-switch

❑Guide of Initial User Accounts for

Fujitsu Support Engineers (x 1)

❑Controller (x 1)

❑Wrist strap (x 1) ❑Using Optional Products (x 1)

❑Package Contents (this manual) (x 1)

❑Drive Enclosure (x 1)

❑Front cover (x 1)

❑Rack mount kit (*1) (x 1 set)

❑AC200V cables (x 2)

IEC320-C13 ↔NEMA L6-15P (4m)

❑miniSAS cables (x 2)

SFF-8088 ↔SFF-8088 (75cm)

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑Drive Enclosure (x 1)

❑Front cover (x 1)

❑Rack mount kit (*1) (x 1 set)

❑AC200V cables (x 2)

IEC320-C13 ↔NEMA L6-15P (4m)

❑miniSAS cables (x 1)

SFF-8088 ↔SFF-8088 (75cm)

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑Expander (x 1)

❑Wrist strap (x 1) ❑miniSAS cable (x 1)

SFF-8088 ↔SFF-8088 (75cm)

❑Using Optional Products (x 1)

❑Package Contents (this manual) (x 1)

❑Disk drive (x 1)

Installed in the controller enclosure or drive enclosure

when purchased with the base unit.

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑Disk drives (x 2)

Installed in the controller enclosure or drive enclosure

when purchased with the base unit.

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑Disk drives (x 4)

Installed in the controller enclosure or drive enclosure

when purchased with the base unit.

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❏3.5" One SSD (ETLSS1HAU, ETLSS2HAU)

❏3.5" Two SSDs (ETLSS1MAU, ETLSS2MAU)

❏3.5" Four SSDs (ETLSS1PAU, ETLSS2PAU)

❏AC Outlet Box (AC200V, 1U) (ETLAC2U1U)

❏AC Outlet Box (AC200V, 2U) (ETLAC2U2U)

❏Advanced Copy Feature (ETLL6CPU, ETLL8CPU)

❏miniSAS Cable Kit (ETLCAMS1U)

*1: Confirm that there are no parts missing from the rack mount kit (for base units and drive enclosures).

*2: Not supplied when purchased with the base unit.

❑SSD (x 1)

Installed in the controller enclosure or drive enclosure

when purchased with the base unit.

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑SSDs (x 2)

Installed in the controller enclosure or drive enclosure

when purchased with the base unit.

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑SSDs (x 4)

Installed in the controller enclosure or drive enclosure

when purchased with the base unit.

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑AC outlet box (x 1)

❑Rack mount kit (*3) (x 1 set)

❑AC200V input cables (x 2)

IEC320-C13 ↔NEMA L6-15P (4m)

❑AC output cables (x 4)

IEC320-C13 ↔IEC320-C14 (3m)

❑Release ties (x 4)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑AC outlet box (1U) (x 2) with AC200V input

cables (x 2) (→NEMA L6-20P, 4m) attached

❑Rack mount kit (*4) (x 1 set)

❑AC output cables (x 12)

IEC320-C13 ↔IEC320-C14 (3m)

❑Release ties (x 12)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑License label plate (x 1)

❑Release tie (x 1) ❑Feature activation licenses (x 1)

❑Package Contents (this manual) (*2) (x 1)

❑miniSAS cable (x 1)

SFF-8088 ↔SFF-8088 (3m)

❑Wrist strap (*2) (x 1)

❑Using Optional Products (*2) (x 1)

❑Package Contents (this manual) (*2) (x 1)

❏One Bracket L ❏One Bracket R ❏Eight M5 screws

❏Eight screw holders

With four M4 screws

attached.

With four M4 screws

attached. For use with

square rack pillar holes.

This manual uses recycled paper.

*3: Confirm that there are no parts missing from the rack mount kit (for AC outlet box (1U)).

*4: Confirm that there are no parts missing from the rack mount kit (for AC outlet box (2U)).

❏Two brackets

for left and right

❏Two holders (for left and right)

❏Four M6 screws

for attaching the brackets and hold-

ers

❏Four screw holders

for attaching the brackets and

holders

❏Two M3 screws

for attaching the AC outlet box

❏One blank panel (1U)

❏Two black M5 screws

for attaching the blank panel

❏Two rack nuts

for attaching the blank panel

❏Two M5 cage nuts

for attaching the blank panel

❏One blank panel (2U) ❏Twelve M5 screws

for attaching AC outlet box (×8)

and blank panel (×4)

❏Twelve rack nuts

for attaching AC outlet box (×8)

and blank panel (×4)

❏Twelve M5 cage nuts

for attaching AC outlet box (×8)

and blank panel (×4)

Both brackets are

the same shape.

With 8 M3

screws attached.

Both holders are

the same shape.

For use with

square rack pillar holes.

For use with

round rack pillar holes.

For use with

square rack pillar holes.

For use with

round rack pillar holes.

For use with

square rack pillar holes.

ETERNUS DX60/DX80 Disk storage system

Package Contents

P3AM-3062-03EN

Date of issuance: October 2009

Issuance responsibility: FUJITSU LIMITED

Printed in Japan

•The contents of this manual may be updated without notice.

•While the contents of this manual are the product of all due care

and diligence, no responsibility can be accepted for operational

problems arising from any errors or missing information, or other

use of the information contained in this manual.

•Fujitsu assumes no liability for damages to third party copyrights or

other rights arising from the use of any information in this manual.

•Contents of this manual are not to be reproduced without permission

from Fujitsu.

•Manuals with missing or wrongly collated pages will be replaced

free of charge.

Autres manuels pour ETERNUS DX60

Ce manuel convient aux modèles suivants

Autres manuels Fujitsu Stockage

Fujitsu

Fujitsu MAF3364LC - Enterprise 36.4 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF250 Mode d’emploi

Fujitsu

Fujitsu MHV2080AS - Extended Duty Mobile 80 GB Hard... Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S3 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX8100 S4 Manuel technique

Fujitsu

Fujitsu ETERNUS DX60 Manuel utilisateur

Fujitsu

Fujitsu M2488 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT20 S2 Manuel utilisateur

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu MHV2160BT - 160GB SATA/150 4200RPM 8MB Notebook Hard... Manuel utilisateur

Fujitsu

Fujitsu MHC2032AT Manuel utilisateur

Fujitsu

Fujitsu MBA3300NC Manuel utilisateur

Fujitsu

Fujitsu DynaMO 1300U2 Pocket Manuel utilisateur

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu MHT2080BH Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S3 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX Disk Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S4 Manuel technique

Fujitsu

Fujitsu ETERNUS CS800 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF Series Manuel utilisateur

Fujitsu

Fujitsu MHV2120BH Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF250 S2 Manuel technique

Fujitsu

Fujitsu ETERNUS LT140 Manuel utilisateur

Fujitsu

Fujitsu MAW3073 SERIES Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur