Fujitsu M3091DC Manuel utilisateur

M3091DC

Image Scanner User' Guide



Notice to American

Users Federal Communications Commission

Radio Frequency Interference Statement

Notice: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC warning: Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

Notes

•The use of a non-shielded interface cable with the referenced device is

prohibited. The length of the parallel interface cable must be 3 meters (10 feet)

or less. The length of the serial interface cable must be 15 meters (50 feet) or

less.

•The length of the power cord must be 3 meters (10 feet) or less.

Notice to Canadian

Users This digital apparatus does not exceed the class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

Le présent appareil numériqué n'émet pas de bruits radioélectnques dépassant les

limites applicables aux appareils numériques de la classe B prescrites dans le

Règlement sur le brouillage radioélectrique édicté par le ministère des

Comunications du Canada.

Notice to German

Users

Bescheinigung des Herstellers/Importeurs

Hiermit wird bescheinigt, daß der/dieldas

•M3091DC in Übereinsstimmung mit den Bestimmungen der

•AmtsblVfg 243/1991 funk-entstört ist. Der Deutschen Bundesport wurde das

inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur

Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt.

•Maschinenlärminformationsverordnung 3. GS GV, 18.01.1991:



Der höchste Schalldruckpegel beträgt 70 dB (A) order weniger gemäß ISO

/7779.

The contents of this manual may be revised without prior notice and without

obligation to incorporate changes and improvements into units already shipped.

Every effort has been made to ensure that the information included here is

complete and accurate at the time of publication, but Fujitsu cannot be held

responsible for errors and omissions.

translated, stored in a database or retrieval system, or transmitted, in any form or

by any means, electronic, mechanical, photocopying, recording, or otherwise,

without the prior written permission of the Fujitsu Limited.

C150-E???-??EN, ??? 1998

Trademark Acknowledgment

Fujitsu are registered trademarks of Fujitsu Limited.



Safe Operation

About this user's guide

This user's guide contains important information about using the M3091DC safely. Read this guide

thoroughly before using the M3091DC. Do not use the M3091DC until you have read and thoroughly

understood the section "Precautions for Safety." Keep this manual in a safe place as long as you use the

M3091DC.



Preface

Thank you for purchasing the M3091DC image scanner. The M3091DC image scanner reads high-color

images. This user's guide explains the basic methods for using the scanner. Read the guide carefully so

that you will use the scanner correctly.

In this manual, we abbreviate "Microsoft® Windows NT® operating system" to "Windows NT®" and

"Microsoft ® Windows ® 95 operating system" to "Windows ® 95."

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United

States and other countries.

Other company names and product names are trademarks or registered trademarks of their respective

owners.



FUJITSU's Liability and Other Important

Information

The user assumes all responsibility for the use of the scanner unit, software used by the scanner, and this

manual, all of which are provided as the M3091DC product.

FUJITSU takes no responsibility for any damage or data loss caused by the use of the M3091DC.

Any compensation for damage caused by the M3091DC will in no event exceed the price paid by the

user for the M3091DC.

Software contained in the M3091DC and update software provided by FUJITSU for the M3091DC must

only be used in the M3091DC. Modification or disassembly of the software is not allowed.



Message Conventions

Alert Messages Conventions

This manual uses alert messages to protect users and other persons in the vicinity of the scanner from

personal injury and property damage. An alert message consists of an alert signal and alert text. The

alert signal consists either of an alert symbol and a signal word or of simply a signal word.

Indicates a hazardous situation that could result in personal injury if the user

does not perform the procedure correctly.

Indicates a hazardous situation could result in minor or moderate personal injury

if the user does not perform the procedure correctly. This alert signal also

indicates potential damage to the product or other property if the user does not

perform the procedure correctly.

The following alert indications are used in this manual together with those

above to indicate a specific hazard.

indicates a warning or an action requiring caution. The symbol in the

triangle indicates the type of hazard (in the example, electric shock).

indicates actions that are prohibited. An image inside the symbol or text

above it provides more concrete information in the example, disassembly is

prohibited).



indicates an action that must be complied with. An image inside the circle or

text above it provides more concrete information (in the example, the

information is to always remove the power plug from the outlet).



Safety Precautions

The following provides important information about the M3091DC. Be sure to comply with this

information to ensure that you use the M3091DC in a safe manner.

Precautions regarding power

- Insert the AC adapter only in a 110 VAC outlet rated at 15 A. Do not use a

multiple receptacle plug. Disregarding these precautions may cause a fire or

electric shock.

- Do not scratch, damage, or otherwise alter the power cord. Do not put

heavy objects on the power cord, and do not pull or bend it. Disregarding

these precautions may damage the power cord, causing fire or electric

shock.

- Be sure to use the power cord (AC adapter) attached to the scanner. Do not

use an extension cord. Disregarding this precaution may result in abnormal

heat or a fire.

- Do not use a power cord or AC adapter that is damaged, or an outlet with a

loose socket. Disregarding this precaution may result in a fire or electric

shock. Return the damaged item to the store where you purchased it, or

contact FUJITSU.

- Disconnect the AC adapter before connecting an interface cable or optional

product. Disregarding this precaution may result in electric shock.

- Do not insert or remove the AC adapter with wet hands. Disregarding this

precaution may result in electric shock.

ÿ

- Clean a dusty AC adapter or outlet with a dry cloth. Using a dusty adapter

or outlet can cause a fire.

- In the following cases, stop using the scanner, remove the AC adapter from

the outlet, and contact the store where you purchased the scanner or contact

FUJITSU.

You see smoke coming from the scanner, or the outside of the scanner is hot

to the touch.

You hear any unusual sounds.

Water gets into the scanner

Continuing to use the scanner in any of these conditions may cause a fire.

- If you hear thunder nearby, remove the AC adapter from the outlet. Failure

to do so may result in damage to the scanner and any connected devices.

- Insert the AC adapter fully and securely into the outlet. Failure to do so

may cause a fire or a failure.

- Be sure to disconnect the AC adapter from the outlet before cleaning,

maintaining, or repairing the scanner.

If you clean or maintain the scanner without disconnecting the AC adapter

from the outlet, you may receive an electric shock.

- If you will not be using the scanner for a long time, be sure to disconnect the

AC adapter from the outlet for safety reasons. Failure to do so may cause a

fire or a failure.

Autres manuels pour M3091DC

Table des matières

Autres manuels Fujitsu Scanner

Fujitsu

Fujitsu FI-5530C2 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Fujitsu

Fujitsu fi-8190 Manuel

Fujitsu

Fujitsu M4099D Manuel utilisateur

Fujitsu

Fujitsu fi 5750C - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu PA03768-B005 Manuel

Fujitsu

Fujitsu ScanSnap iX1500 Guide de configuration

Fujitsu

Fujitsu SP-1130Ne Manuel utilisateur

Fujitsu

Fujitsu PA03360-B525 Manuel

Fujitsu

Fujitsu S510M - ScanSnap - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu Fi-4750c - Color Duplex Document Scanner 50ppm 90ipm... Manuel

Fujitsu

Fujitsu M3096EX/GX Manuel

Fujitsu

Fujitsu M3092DC Manuel utilisateur

Fujitsu

Fujitsu M3099A Manuel

Fujitsu

Fujitsu fi-8190 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap fi-5110EOX Manuel

Fujitsu

Fujitsu ScanSnap fi-5110EOX Manuel

Fujitsu

Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Manuel utilisateur

Fujitsu

Fujitsu fi-6800 Manuel utilisateur

Fujitsu

Fujitsu ScanSnap Organizer Manuel utilisateur

Fujitsu

Fujitsu Scan Partner 300C Manuel utilisateur

Fujitsu

Fujitsu Mobile Color Scanner Manuel utilisateur

Fujitsu

Fujitsu fi-6000N Guide de configuration

Fujitsu

Fujitsu fi 5750C - Document Scanner Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur

Innova

Innova 5210 Manuel utilisateur

Visioneer

Visioneer CardReader 100 Guide de démarrage rapide

Rohde & Schwarz

Rohde & Schwarz TSME6 Manuel utilisateur