Fujitsu FibreCAT TXF Manuel utilisateur
FibreCAT®TXF
Backup Subsystem
Operating Manual
Edition November
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
Certified documentation
according to DIN EN ISO 9001:2000
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2000.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright and Trademarks
Copyright © 2008 Fujitsu Siemens Computers GmbH.
All rights reserved.
Delivery subject to availability. The right to technical modification is reserved.
All hardware and software names used are trade names and/or trademarks of their respective
manufacturers.
FibreCAT TXF Operating Manual
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Concept and target groups for this manual . . . . . . . . . . 6
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 6
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . . 7
1.4 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Important information . . . . . . . . . . . . . . . . . . . . . 11
2.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 Electrostatic sensitive device label . . . . . . . . . . . . . . 13
2.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.4 RFI suppression . . . . . . . . . . . . . . . . . . . . . . . . 14
2.5 Rack installation instructions . . . . . . . . . . . . . . . . . 15
2.6 Notes on transportation . . . . . . . . . . . . . . . . . . . . 15
2.7 Environmental protection . . . . . . . . . . . . . . . . . . . 16
3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1 Installation steps . . . . . . . . . . . . . . . . . . . . . . . . 20
3.2 Unpacking the backup subsystem . . . . . . . . . . . . . . 20
3.3 Installing/removing the backup subsystem
in the rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3.4 Rack requirements . . . . . . . . . . . . . . . . . . . . . . . 21
3.5 Installation in the PRIMECENTER Rack or DataCenter Rack 25
3.5.1 Bearing rail variant . . . . . . . . . . . . . . . . . . . . . . . . 25
3.5.2 Telescopic rail variant . . . . . . . . . . . . . . . . . . . . . . 29
3.6 Installation in 3rd party racks . . . . . . . . . . . . . . . . . 32
3.7 Connecting the backup subsystem . . . . . . . . . . . . . . 33
3.7.1 Connecting the power cord . . . . . . . . . . . . . . . . . . . 35
Operating Manual FibreCAT TXF
Contents
3.7.2 Connecting the server . . . . . . . . . . . . . . . . . . . . . . 36
3.7.2.1 Connecting SCSI cables . . . . . . . . . . . . . . . . . . . 36
3.7.2.2 Connecting SAS cables . . . . . . . . . . . . . . . . . . . . 37
3.7.2.3 Connecting USB cables . . . . . . . . . . . . . . . . . . . . 37
3.8 Instructions on connecting and disconnecting cables . . . . 38
4 Starting up and operation . . . . . . . . . . . . . . . . . . . . 39
4.1 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 41
5.1 Backup subsystem cannot be switched on . . . . . . . . . . 41
5.2 SCSI devices are not detected . . . . . . . . . . . . . . . . . 41
5.3 Incorrect SCSI ID . . . . . . . . . . . . . . . . . . . . . . . . 41
5.4 Fan failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.5 Replacing the backup device . . . . . . . . . . . . . . . . . . 42
6 Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.1 Adding a backup device . . . . . . . . . . . . . . . . . . . . . 49
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
FibreCAT TXF Operating Manual 5
1 Preface
The demand for scalable storage capacity and the increasing trend towards
rack-based servers call for correspondingly compact and powerful backup
systems that can ensure the necessary data security.
Figure 1: FibreCAT TXF backup subsystem
The FibreCAT TXF backup subsystem provides a flexible means of consoli-
dating rack-based data security. The FibreCAT TXF backup subsystem makes
it possible to install today's backup devices (such as LTO3 Ultrium, DDS Gen5,
VXA-320, etc.) in a separate 19" housing. The FibreCAT TXF backup
subsystem is available in different models for SCSI-, SAS-, or USB technology.
Each I/O module has 4 ports for the connection of up to 4 servers and it has a
power management for the remote on/off of a single drives or the complete
system. The backup subsystem provides four 1.6"-high bays for this purpose.
The backup subsystem is also ready to accommodate future backup devices.
The backup subsystem offers a simple, flexible and reasonably priced solution
for avoiding backup constraints and enabling expansion.
The models are equipped with different input modules and cable chain variants.
The FibreCAT TXF backup subsystem has an integrated power supply unit. The
FibreCAT TXF backup subsystem is cooled by a fan. The fan is monitored to
ensure that it does not fall below the nominal speed.
In the 19" rack, the FibreCAT TXF backup subsystem occupies three height
units (3 HU).
6 Operating Manual FibreCAT TXF
Concept and target groups for this manual Preface
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your backup
subsystem.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the infor-
mation you need to put your FibreCAT TXF backup subsystem into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
1.2 Documentation overview
More information on your FibreCAT TXF backup subsystem can be found in the
following documents:
– “Quick Start Hardware - FibreCAT TXF backup subsystem- First Steps
Hardware Setup” leaflet (only included as a printed copy)
– “Safety notes and other important information” manual
– “Warranty” manual
– “Returning used devices” manual
IFibreCAT TXF manuals are available in PDF format on the ServerBooks
DVD.
The PDF files of the manuals can also be downloaded free of charge
from the Internet. The overview page showing the online documentation
available on the Internet can be found using the URL:
http://manuals.fujitsu-siemens.com. The Fibre-CAT documentation can be
accessed using the Industry standard servers navigation option.
If you need a replacement copy of the ServerBooks DVD, send the
details of your server to the following e-mail address: Reklamat-PC-
FibreCAT TXF Operating Manual 7
Preface Notational conventions
1.3 Notational conventions
The following notational conventions are used in this manual:
Text in italics indicates commands or menu items.
“Quotation marks” indicate names of chapters and terms that are being
emphasized.
Êdescribes activities that must be performed in the order
shown.
VCAUTION! pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
Iindicates additional information, notes and tips.
8 Operating Manual FibreCAT TXF
Technical data Preface
1.4 Technical data
Electrical characteristics of the power supply unit
Rated voltage 100 V-127 V / 200 V-240 V
max./min input current 90 V-137 V / 180 V-264 V
max. continous power 230 W
max surget power 260 W
Rated frequency 50 Hz / 60 Hz
Dimensions and weight
Height (mm) 131.4
Width (mm) 482.6
Depth (mm) 704
Rack installation depth (mm) 700
Rack height units 3 height units (HU)
Rack cable area depth (mm) 100
Weight (kg) 15.5 kg (without drives)
Environmental conditions (according to DIN EN 60721-3-x)
Climate/operation (class 3K3):
Temperature (°C) 15 to 35
Relative humidity (%) 5 to 85
Climate/transport (class 2K2):
Temperature (°C) 25 to 60
Relative humidity (%) 15 to 98
Mechanical environmental conditions
Operating Class 3M2
Transport Class 2M1
FibreCAT TXF Operating Manual 9
Preface Technical data
Standards complied with
Product safety and ergonomics IEC 60950 / EN 60950 / UL 1950,
CSA 22.2 No. 950 950
Electromagnetic compatibility
Interference emissions EN 55022, class B; FCC part 15, classB
Interference immunity EN 50024
FCC verification Class A
VCCI verification Class A
CE marking EMC directive 89/339/EEC;
EN 61000-3-2; EN 61000-3-3
product safety 73/23/EEC
Approval certification GS, CSA US/C, CB certificate
Noise development (ISO 9296) Operating
Workstation-related
sound pressure level (LpAm)
max. 40 dB(A)
Maintenance areas and ventilation distances
are specified by the rack
Table des matières
Autres manuels Fujitsu Matériel informatique
Fujitsu
Fujitsu PRIMERGY TX150 S2 Manuel utilisateur
Fujitsu
Fujitsu ESPRIMO P7XX Manuel utilisateur
Fujitsu
Fujitsu CELSIUS W410 Manuel utilisateur
Fujitsu
Fujitsu SK-86R12-CPU01 Manuel utilisateur
Fujitsu
Fujitsu MPA3022AT Manuel utilisateur
Fujitsu
Fujitsu F2 MC-8FX Family Manuel utilisateur
Fujitsu
Fujitsu F2 MC-8FX Family Manuel utilisateur
Fujitsu
Fujitsu MB9B100A Series Manuel utilisateur
Fujitsu
Fujitsu F2MC-16L Series Manuel utilisateur
Fujitsu
Fujitsu MB2198-16FX-120P-M21 Manuel utilisateur
Fujitsu
Fujitsu FUTRO S550-2 Manuel utilisateur
Fujitsu
Fujitsu F2 MC-8FX Family Manuel utilisateur
Fujitsu
Fujitsu PG-1863 Manuel utilisateur
Fujitsu
Fujitsu PRIMERGY Tape Drv DAT72 Manuel utilisateur
Fujitsu
Fujitsu MB91460 SERIES FR60 Manuel utilisateur
Fujitsu
Fujitsu MB2198-790-01-E Manuel utilisateur
Fujitsu
Fujitsu MB86R12 Mode d’emploi
Fujitsu
Fujitsu 8FX Manuel utilisateur
Fujitsu
Fujitsu FMW42CR1 Manuel utilisateur
Fujitsu
Fujitsu MB90890 Series Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
