Fujitsu MB2198-701-E Manuel utilisateur

Corporate names revised in the documents

The Fujitsu Limited reorganized its LSI business into a wholly owned subsidiary, the Fujitsu

Microelectronics Limited on March 21, 2008.

The corporate names “Fujitsu” and “Fujitsu Limited” described all in this document have been

revised to the “Fujitsu Microelectronics Limited”. Thank you for your cooperation and

understanding this notice.

Moreover, there are no changes in the related documents other than corporate names revised.

Customers are advised to consult with sales representatives before ordering.

March 21, 2008

Fujitsu Microelectronics Limited

FUJITSU SEMICONDUCTOR

SUPPORT SYSTEM SS01-71078-1E

DSU-FR EMULATOR

LQFP-120P HEADER TYPE6

MB2198-701-E

OPERATION MANUAL

PREFACE

Thank you for purchasing the LQFP-120P*1header type6 for the DSU-FR*2emulator (model num-

ber: MB2198-701-E).

This product is a header used in the adapter unit for connecting a DSU-FR emulator (model number:

MB2198-01)*3to a user system that uses a Fujitsu FR family microcontroller MB91F662 (LQFP-

120P).

This manual describes how to use the LQFP-120P header type6 for the DSU-FR emulator. Please

read the manual carefully before using this product.

Please contact sales or support representative for details on the production and evaluation MCU

models that can be used with this product.

*1 : The package is the FPT-120P-M21 (lead pitch: 0.5mm, body size: 16.0mm ×16.0mm).

*2 : FR, the abbreviation of FUJITSU RISC controller, is a line of products of FUJITSU Limited.

*3 : Referred to below as the “emulator”

■Handling and Usage Procedures

Refer the to following manuals for details on handling procedures, usage procedures, and warnings

for using the product safely.

•DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL

•DSU-FR EMULATOR MB2198-700-E BGA-480P ADAPTER OPERATION MANUAL

■European RoHS support

Products with a -E suffix on the part number are European RoHS compliant products.

■Notice on this document

All information included in this document is current as of the date it is issued. Such information is

subject to change without any prior notice.

Please confirm the latest relevant information with the sales representatives.

■Cautions of the Products Described in this Document

The following precautions apply to the product described in this manual.

CAUTION Indicates a feature that, if not used correctly, may result in minor or moderate inju-

ries, and which may cause the customer system to malfunction.

Cuts The product contains sharp edges that are left unavoidably exposed, such as jump-

er plugs. Handle the product with due care not to get injured with such pointed parts.

Damage When connecting the header board to the user system, correctly position the index

mark (▲) on the NQPACK mounted on the user system with the index mark (▲) on

the header board, otherwise the emulator and user system might be damaged.

Damage When mounting a mass production MCU, correctly position pin 1, otherwise the

mass production MCU and user system might be damaged.

•The contents of this document are subject to change without notice.

Customers are advised to consult with sales representatives before ordering.

•The information, such as descriptions of function and application circuit examples, in this document are presented sole-

ly for the purpose of reference to show examples of operations and uses of FUJITSU semiconductor device; FUJITSU

does not warrant proper operation of the device with respect to use based on such information. When you develop

equipment incorporating the device based on such information, you must assume any responsibility arising out of such

use of the information. FUJITSU assumes no liability for any damages whatsoever arising out of the use of the infor-

mation.

•Any information in this document, including descriptions of function and schematic diagrams, shall not be construed

as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right

of FUJITSU or any third party or does FUJITSU warrant non-infringement of any third-party's intellectual property

right or other right by using such information. FUJITSU assumes no liability for any infringement of the intellectual

property rights or other rights of third parties which would result from the use of information contained herein.

•The products described in this document are designed, developed and manufactured as contemplated for general use,

including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not

designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless

extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal

injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air

traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2)

for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite).

Please note that FUJITSU will not be liable against you and/or any third party for any claims or damages arising in

connection with above-mentioned uses of the products.

•Any semiconductor devices have an inherent chance of failure. You must protect against injury, damage or loss from

such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire pro-

tection, and prevention of over-current levels and other abnormal operating conditions.

•Exportation/release of any products described in this document may require necessary procedures in accordance with

the regulations of the Foreign Exchange and Foreign Trade Control Law of Japan and/or US export control laws.

•The company names and brand names herein are the trademarks or registered trademarks of their respective owners.

1. Check Package Contents

Before starting to use the header board, check that all of the following items are present.

•LQFP-120P header type6*1: 1

•Header board attachment screws (M2 ×10mm, 0.4mm pitch) : 4

•Washers : 4

•NQPACK120SD*2: 1

•HQPACK120SD*3: 1

•Operation manual (English, this document) : 1

•Operation manual (Japanese) : 1

*1 : Referred to below as the “header board”.

The header board is equipped with a YQPACK120SD-4W (Tokyo Eletech Corporation, re-

ferred to below as the “YQPACK”).

*2 : IC socket (Tokyo Eletech Corporation, referred to below as the "NQPACK"). Includes a dedi-

cated screwdriver and three guide pins. You are able to use the highly reliable

NQPACK120SD-SL adapter socket (Tokyo Eletech Corporation, sold separately) by providing

screw holes for mounting the IC socket on the printed circuit board of the user system. Contact

Tokyo Eletech for details.

*3 : IC socket cover (Tokyo Eletech Corporation, referred to below as the “HQPACK”). Includes

four screws (M2 ×6mm, 0.4mm pitch) for attaching the HQPACK.

This product functions as an adapter unit when combined with an adapter board (available separate-

ly). Furthermore, the product functions as part of an emulator system when used with an emulator.

Contact a sales or support representative for details on the emulators and adapter boards that are com-

patible with this product.

2. Handling Precautions

The adapter unit is precision-manufactured to improve dimensional accuracy and to ensure reliable

contact. The adapter unit is therefore sensitive to mechanical shock.

To ensure correct use of the adapter unit in the proper environment, observe the following points re-

garding its insertion and removal:

•Avoid placing stress on the NQPACK mounted on the user system while the adapter unit is

connected.

3. Notes on Designing

■Notes on Designing the Printed Circuit Board for the User System

If the header board is connected to a user system, the heights of parts mounted around the

header board are restricted.

When designing the printed circuit board of the user system, consider the heights of components

within the range of the header board, as shown in Figure 1, so that the components mounted on the

user system do not interfere with the header board.

Figure 1 Header board dimensions

CN1

B60 A60

CN2

B1 A1

B60 A60

B1 A1

CN3

approx.

13.2mm*

approx. 31.5mm*

43.0mm

38.5mm

55.0mm

66.5mm

* : The height differs slightly depending on how the sockets are engaged.

■Notes for Designing the MCU Foot Pattern

Figure 2 shows the recommended dimensions of the NQPACK footprint mounted on the printed cir-

cuit board of the user system.

The printed circuit board of the user system must be designed with due consideration given to this

footprint as well as to the mass production MCU.

For more information, contact the Tokyo Eletech Corporation.

Figure 2 Foot pattern dimensions for mounting the NQPACK

*1 : Positions of the guide pin holes (φ1.0mm) when mounting the NQPACK. These holes do not need to be

fabricated if the guide pins are not used.

*2 : Position of the hole (φ3.2mm) for the screw for affixing the IC socket when the NQPACK120SD-SL (Tokyo

Eletech Corporation, sold separately) is mounted instead of the NQPACK120SD. This hole does not

need to be fabricated if the NQPACK120SD-SL is not used.

0.5mm ×29 = 14.5mm

0.5mm 8.0mm 0.25mm

8.0mm

φ3.2mm SL-type*2

3- φ1.0mm *1

15.6mm

Pin 1

19.0mm

1.7mm

4. Procedure for Connecting to the User System

Mount the supplied NQPACK on the user system before using the header board.

■Connection Procedure

1. To connect the header board to the user system, align the index mark (▲) on the header board

with pin 1 on the NQPACK mounted on the user system, which is also indicated by an index

mark (▲), and insert the header into the NQPACK (See Figure 3).

As the YQPACK pins are thin and easily bent, check that the YQPACK pins are kept straight

when inserting into the NQPACK.

2. Insert the header board attachment screws, together with washers, into the four screw holes in the

top of the header board and tighten the diagonally opposite screws in turn (See Figure 4).

Use the dedicated screwdriver supplied with the NQPACK to tighten the screws equally.

Take care not to over-tighten as this may cause a bad connection.

Figure 3Index positions

NQPACK

index (▲)

Header board

index (▲)

YQPACK

(Mounted on the rear surface)

Flat cable connector A

Flat cable connector B

Figure 4 Header board connection procedure

■Disassembly Procedure

To remove the header board, first remove the four screws and then lift the header board vertically up

and off of the NQPACK.

Header board

attachment screws

Washers

Header board

User system

YQPACK

NQPACK

5. Connecting to the Adapter Board

The adapter board and header board are connected by flat cables that are supplied with the adapter

board. The flat cable connector C on the adapter board is not needed in this product.

■Connecting

Insert the eject lock units into the flat cable connectors on each of the boards until locked.

Figure 5 Connection to the adapter board

■Disconnecting

Disconnect the flat cables pulling out the eject locks and by releasing the locks of the flat cables.

ABC

Flat cable connector

Adapter board

Eject lock

Flat cable

Flat cable connector

Header board

Table des matières

Autres manuels Fujitsu Matériel informatique

Fujitsu

Fujitsu IdeaBoxx Jade Manuel utilisateur

Fujitsu

Fujitsu MB2198-16FX-120P-M21 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY PG-RSB104 Manuel utilisateur

Fujitsu

Fujitsu MB9B100A Series Manuel utilisateur

Fujitsu

Fujitsu FUTRO S550-2 Manuel utilisateur

Fujitsu

Fujitsu F2MCTM-16LX Manuel utilisateur

Fujitsu

Fujitsu F2MC-16FX MB2198 Manuel utilisateur

Fujitsu

Fujitsu MB91460 SERIES FR60 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY Tape Drv DAT72 Manuel utilisateur

Fujitsu

Fujitsu 560H SERIES Manuel utilisateur

Fujitsu

Fujitsu FMC-16LX/FR Manuel utilisateur

Fujitsu

Fujitsu MB2146-270 Manuel utilisateur

Fujitsu

Fujitsu PRIMEPOWER B23Q8YA-G-02-E Instructions de montage

Fujitsu

Fujitsu F2MC-8FX MB2146-213 Manuel utilisateur

Fujitsu

Fujitsu MB2031-20 Manuel utilisateur

Fujitsu

Fujitsu SOFTUNE F2 MC-16 Manuel utilisateur

Fujitsu

Fujitsu Supplement for Embedded MegaRAID SATA Manuel utilisateur

Fujitsu

Fujitsu DESKPOWER C600 Series Manuel utilisateur

Fujitsu

Fujitsu PG-126 Manuel utilisateur

Fujitsu

Fujitsu Oracle M10-1 Manuel utilisateur

Fujitsu

Fujitsu CELSIUS W410 Manuel utilisateur

Fujitsu

Fujitsu PG-1863 Manuel utilisateur

Fujitsu

Fujitsu MB91F109 FR30 Manuel utilisateur

Fujitsu

Fujitsu MB2198-503-E Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur