FLIR MR60 Manuel utilisateur

USER MANUAL

FLIR MODEL MR60

MOISTURE METER PRO

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

Table of Contents

1. DISCLAIMERS 4

1.1 Copyright 4

1.2 Quality Assurance 4

1.3 Documentation 4

1.4 Disposal of Electronic Waste 4

2. SAFETY 5

2.1 Safety Notes 5

2.2 Safety Symbols 5

3. INTRODUCTION 6

3.1 Key Features 6

4. METER DESCRIPTIONS 7

4.1 Meter Description 7

4.2 Control Button Descriptions 8

4.3 Main Menu Overview 8

5. OPERATION 9

5.1 Powering the Meter 9

5.1.1 Auto Power OFF (APO) 9

5.2 Moisture Measurements 9

5.2.1 Moisture Measurement Overview 9

5.2.2 Moisture Display Overview 10

5.2.3 Moisture Menu 10

5.2.4 External Pin Probe Moisture Measurements 11

5.2.5 Internal Moisture Sensor Measurements (Pinless) 11

5.2.6 Reference Mode Moisture Measurements 12

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

5.3 Screen Capture and Data Acquisition 12

5.3.1 Screen Capture and Review 12

5.3.2 Data Acquisition 12

5.4 High Moisture Alarm 13

5.5 SETTINGS Menu 14

6. MAINTENANCE 15

6.1 Cleaning 15

6.2 Battery Charging 15

6.2.1 Disposal of Electronic Waste 15

6.3 Updating the MR60 firmware 16

7. SPECIFICATIONS 17

7.1 General Specifications 17

7.2 Moisture Meter Specifications 18

8. TECHNICAL SUPPORT 18

9. MATERIAL GROUPS 19

9.1 Common Names of Timbers (BS888/589:1973) with MR60 Group Nos. 19

9.2 Botanical names of timbers with MR60 program group numbers 21

9.3 %WME Table (% Wood Moisture Equivalent) 23

10. WARRANTY 24

10.1 FLIR Test & Measurement 2-Year Limited Warranty 24

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

1. Disclaimers

1.1 Copyright

code may be reproduced, transmitted, transcribed or translated into any language or computer

language in any form or by any means, electronic, magnetic, optical, manual or otherwise, without

the prior written permission of FLIR Systems.

The documentation must not, in whole or part, be copied, photocopied, reproduced, translated or

transmitted to any electronic medium or machine readable form without prior consent, in writing,

from FLIR Systems.

Names and marks appearing on the products herein are either registered trademarks or

trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or company

names referenced herein are used for identification only and are the property of their respective

owners.

1.2 Quality Assurance

The Quality Management System under which these products are developed and manufactured

has been certified in accordance with the ISO 9001 standard.

FLIR Systems is committed to a policy of continuous development; therefore we reserve the right

to make changes and improvements on any of the products without prior notice.

1.3 Documentation

To access the user manuals, extended warranty registration, firmware updates, and notifications

go to the Download tab at: http://support.flir.com. In the download area you will also find the

latest releases of manuals for our other products, as well as manuals for our historical and

obsolete products.

1.4 Disposal of Electronic Waste

As with most electronic products, this equipment must be disposed of in an

environmentally friendly way, and in accordance with existing regulations for

electronic waste.

Please contact your FLIR Systems representative for more details.

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

2. Safety

2.1 Safety Notes

Before operating the device, you must read, understand, and follow all instructions, dangers,

warnings, cautions, and notes.

FLIR Systems reserves the right to discontinue models, parts or accessories, and other items,

or to change specifications at any time without prior notice.

2.2 Safety Symbols

UL listed

Double insulation protection

European Community compliance

Electronic Waste disposal restrictions

This symbol, adjacent to another symbol, indicates the user must refer to the

user manual for further information.

Agency Approvals:

FCC CLASS B

UL listing is not an indication or a verification of the accuracy of the meter

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

3. Introduction

Thank you for selecting the FLIR MR60 Moisture Meter Pro. The FLIR MR60 Moisture Meter Pro is

an easy-to-use pin and pinless moisture meter with advanced functionality to meet all your

professional measurement needs. An integrated pinless sensor and an external pin probe (MR02)

provide the flexibility to take either destructive or non-destructive measurements. You can select

one of the eleven material groups for pin moisture, or set a reference point for fast pinless

moisture scanning. The MR60 is also compatible with FLIR’s full line of external moisture probes,

so you have the flexibility to expand your meter as needed . Conveniently save screenshots of

your measurements and as a CSV file with the date, time, and settings. The bright, color screen

and bargraph makes readings clear and easy to see. Built portable and durable enough to

withstand a 3-meter drop, you can take MR60 with you anywhere –even to your toughest jobs.

This device is shipped fully tested and calibrated and, with proper use, will provide years of reliable

service.

3.1 Key Features

Quickly scan for moisture using the integrated non-invasive pinless moisture sensor

External pin probe (included) for resistive moisture content measurements

Pin or Pinless moisture readings are displayed with large digits and color bargraph

Save up to 10,000 screens shots and readings that you can transfer, view, & via PC / USB

Eleven (11) material group selections for pin‐based readings

Programmable high moisture alarm with audible and color visual alerts

Easy to read color display and intuitive interface with helpful function labels in local languages

File management & report generation with free FLIR Tools PC software

Internal rechargeable battery with USB based international charger

Durable, 3m drop tested and Portable for everyday use on the go

Optional probe accessories for application specific needs

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

4. Meter Descriptions

4.1 Meter Description

1. Color Graphical Display

2. Capture button stores reading and screen shot

3. Four (4) Navigation buttons (ring)

4. Select button (center)

5. Back button

6. Hold button

7. Power button

8. USB, external probe jack, and charge LED

9. Internal Pinless Moisture sensor (back)

10. Micro USB cable jack

11. External probe jack (RJ45)

12. Charging LED

Fig. 4-1 Meter Description

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

4.2 Control Button Descriptions

Capture button. Save a reading to internal CSV file and store a

screen shot.

Back button. Back up or return from a menu screen.

Hold Button (freezes reading on the display)

Press to power ON. Press and hold to power the meter OFF.

Press the Select button (center) to access the Main Menu. Use this

button to select items from within the menu structure.

Use the four outer (ring) buttons to navigate.

4.3 Main Menu Overview

The menu items are described briefly in this section. Detailed explanations for each item are

provided in subsequent sections of this User Manual.

The Main Menu is shown in Fig. 4-2. Press the Select button to open the Main Menu and use

the navigation buttons to move to the desired mode (Screen-shot review mode, Moisture

mode, and Settings mode, left to right). Use the Back button to return from a sub-menu:

1. Screen-shot review mode (press Select to enter the mode

and then use left/right navigation buttons to scroll

through stored screen shots)

2. Moisture mode icon. Press Select to view the four

Moisture menu items (Material group, Pin mode, Pinless

mode, and Set Reference mode). Note that the Material

group mode is only accessible when Pin mode is selected

and the Set Reference function is only available when Pinless mode is selected.

3. Settings mode items: Language, High Alarm, Auto Power OFF, Date & Time, Meter

Information, and Help contact screen.

Fig. 4-2 Main Menu

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

5. Operation

Important Note: Please charge the meter battery before first use. Instructions for battery charging

are provided in Section 6.2.

5.1 Powering the Meter

1. Press the Power button momentarily to switch the meter ON.

2. Press and hold the Power button for > 1 second to switch the meter OFF.

3. If the battery status indicator (upper left) shows that the battery voltage is low, or if the

meter does not power on, charge the battery. See section 6.2 Battery Charging.

4. Please fully charge the battery before use.

5.1.1 Auto Power OFF (APO)

The meter switches OFF automatically after a programmed period of inactivity (1, 5, or 20

minutes). Press any button to reset the APO timer. To disable APO, or to change the APO time-

out value, use the Settings mode, accessible from the Main Menu. The default time-out is

20 minutes.

5.2 Moisture Measurements

5.2.1 Moisture Measurement Overview

Moisture measurements can be performed using either the internal pinless moisture sensor

(rear) or by connecting an external probe. A standard external pin probe is included which

connects to the MR60 via the jack at the bottom of the meter.

NOTE: Objects in close proximity to the internal pinless moisture sensor (located on the rear of

the unit) will affect the reading on the display; Keep hands and fingers clear of the sensor when

taking measurements.

The internal moisture sensor detects moisture to a depth of approximately 19mm (0.75”). The

actual depth will vary depending upon the amount of moisture, the material under test, surface

roughness, and other factors.

Moisture readings are shown on the display (digitally and with bar graph). See Fig. 5-1. Pinless

measurement readings are ‘relative’scaled (0~100). Pin-based readings are represented in

terms of %MC (moisture content); additional information is provided in Section 5.2.5 External

Pin Probe Moisture Measurements and in the specifications.

Moisture measurements are covered in detail in the following sections. Be sure to select Pin

Mode or Pinless Mode in the Moisture Menu to match the measurement type.

FLIR MR60 USER MANUAL Document Identifier: MR60-en-US_AB

5.2.2 Moisture Display Overview

Moisture readings are displayed as shown in the example for Fig. 5-1.

1. Battery status icon

2. Moisture reading (digital)

3. Moisture reading in bargraph format; Bars

are blue when in non-alarm state and red

when in alarm state.

4. Set Reference value (see Set Reference

mode in Sections 5.2.3 and 5.2.6); pinless

mode only. Note that in Pin mode this

display area will show the selected

Material Group.

5. High Moisture Alarm threshold (see

Section 5.4)

6. Selected Mode

7. DATA HOLD icon

5.2.3 Moisture Menu

Icons 1, 2, 3, and 4 in Fig. 5-2 are shown in the Moisture Mode. Press Select to open the main

menu and then choose the moisture icon to view the Moisture modes. A blue dot is

shown to the left of the pin icon (2) or the pinless icon (3), depending on which is selected.

Use the Navigation buttons to highlight an icon and use the Select button to choose one.

Material Groups

Select the material under test (Groups 1~11); For

Pin Mode only. Select a Material group that best

matches the material under test. This applies only

for external pin-based probe use; Use the

navigation buttons to scroll through the group list

and use the Select button to choose the group.

The selected group will show a blue dot. See the

Material Group List Appendix in Section 9.

Pin mode

The Pin mode must be selected when the external pin-based probe is used. Note the Pin icon

on the main display when Pin mode is selected.

Pinless mode

Pinless mode must be selected when using the internal (rear) sensor. Note the pinless icon on

the main display when this mode is selected.

Set Reference

Select this mode to store the current reading as a reference/comparator value (Pinless mode

only).

Fig. 5-2 Moisture mode icons

Fig. 5-1 Moisture Mode Display

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels FLIR Instrument de mesure

FLIR

FLIR TA60 Manuel utilisateur

FLIR

FLIR TA72 Manuel utilisateur

FLIR

FLIR Extech Instruments EN300 Manuel utilisateur

FLIR

FLIR VS80 KIT Manuel utilisateur

FLIR

FLIR MR7 Manuel utilisateur

FLIR

FLIR Extech EX612 Manuel utilisateur

FLIR

FLIR VS80C10-25RM Manuel utilisateur

FLIR

FLIR CM94 Manuel utilisateur

FLIR

FLIR Extech HDV-TX2 Manuel utilisateur

FLIR

FLIR CM85 Manuel utilisateur

FLIR

FLIR Extech Instruments Oyster-10 Manuel utilisateur

FLIR

FLIR CM55 Manuel utilisateur

FLIR

FLIR Extech Instruments MA410 Manuel utilisateur

FLIR

FLIR Extech Instruments MA150 Manuel utilisateur

FLIR

FLIR MR59 Manuel utilisateur

FLIR

FLIR MSX MR277 Manuel utilisateur

FLIR

FLIR EXTECH INSTRUMENTS PQ3450 Manuel utilisateur

FLIR

FLIR CM174 Manuel utilisateur

FLIR

FLIR Extech 380926 Manuel utilisateur

FLIR

FLIR CM55 Manuel utilisateur

FLIR

FLIR CM65 Manuel utilisateur

FLIR

FLIR Extech 407760 Manuel utilisateur

FLIR

FLIR CM42 Manuel utilisateur

FLIR

FLIR MR55 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur