FLIR CM42 Manuel utilisateur

USER MANUAL

FLIR True RMS 400A Clamp Meter Series

Models CM42, CM44, and CM46

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

Table of Contents

1. DISCLAIMERS 4

1.1 Copyright 4

1.2 Quality Assurance 4

1.3 Documentation 4

1.4 Disposal of Electronic Waste 4

2. SAFETY 5

3. INTRODUCTION 7

4. DESCRIPTION 8

4.1 Meter Parts 8

4.2 Function Switch Positions 9

4.3 Function Buttons 10

4.4 Display Icons and Indicators 10

5. OPERATION 12

5.1 Powering the Meter 12

5.2 Intelligent Auto Power OFF (APO) feature 12

5.3 Auto Range 12

5.4 Out-of-range Warning 12

5.5 Voltage Measurements 13

5.6 Electric Field (EF) Detection 14

5.7 Standard Current Clamp Measurements 15

5.8 Low Current Accu-TipTM Clamp Measurements 17

5.9 DC A Current Test Lead Measurements (CM44 and CM46) 18

5.10 Resistance Measurements 19

5.11 Continuity Tests 19

5.12 Capacitance Measurements (CM44 and CM46) 20

5.13 Temperature Measurements (CM44 and CM46) 21

5.14 Diode Tests 22

5.15 Relative / DC Zero Modes (CM44 and CM46) 23

5.16 MIN/MAX/AVG Recording 23

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

5.17 VFD Mode (low pass filter) 23

5.18 Display Hold Function 24

5.19 Display Backlighting 24

5.20 PEAK Mode (CM44 and CM46) 24

6. MAINTENANCE 25

6.1 Troubleshooting Tips 25

6.2 Accuracy and Calibration 25

6.3 Cleaning and Storage 25

6.4 Battery Replacement 25

7. SPECIFICATIONS 26

7.1 General specifications 26

7.2 Electrical specifications 28

8. TECHNICAL SUPPORT 31

9. WARRANTY 32

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

1. Disclaimers

1.1 Copyright

including source code may be reproduced, transmitted, transcribed or translated into

any language or computer language in any form or by any means, electronic, magnetic,

optical, manual or otherwise, without the prior written permission of FLIR Systems.

The documentation must not, in whole or part, be copied, photocopied, reproduced,

translated or transmitted to any electronic medium or machine readable form without

prior consent, in writing, from FLIR Systems.

Names and marks appearing on the products herein are either registered trademarks or

trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names or

company names referenced herein are used for identification only and are the property

of their respective owners.

1.2 Quality Assurance

The Quality Management System under which these products are developed and

manufactured has been certified in accordance with the ISO 9001 standard.

FLIR Systems is committed to a policy of continuous development; therefore, we reserve

the right to make changes and improvements on any of the products without prior

notice.

1.3 Documentation

To access the latest manuals and notifications, go to the Download tab at:

http://support.flir.com. It only takes a few minutes to register online. In the download

area you will also find the latest releases of manuals for our other products, as well as

manuals for our historical and obsolete products.

1.4 Disposal of Electronic Waste

As with most electronic products, this equipment must be disposed of in an

environmentally friendly way, and in accordance with existing regulations

for electronic waste.

Please contact your FLIR Systems representative for more details.

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

2. Safety

SAFETY NOTES

This user manual contains information and warnings that must be followed for operating the

instrument safely and maintaining the instrument in a safe operating condition. If the instrument is

used in a manner not specified by the manufacturer, the protection provided by the instrument

may be impaired.

The meter protection rating, against the users, is double insulation per UL/IEC/EN61010-1 Ed. 3.0,

IEC/EN61010-2-033 Ed. 1.0, CAN/CSA C22.2 No. 61010-1 Ed. 3.0, IEC/EN61010-2-032 Ed. 3.0 &

IEC/EN61010-031 Ed. 1.1: Measurement Category III 600V & Category IV 300V AC & DC.

BRIEF INFORMATION ABOUT MEASUREMENT CATEGORIES

Measurement Category IV is applicable to test and measuring circuits connected at the source of the building’s

low-voltage MAINS installation. Examples are measurements on devices installed before the main fuse or

circuit breaker in the building installation.

Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the

building’s low-voltage MAINS installation. Examples are measurements on distribution boards (including

secondary meters), circuit-breakers, wiring, including cables, bus-bars, junction boxes, switches, socket-outlets

in the fixed installation, and equipment for industrial use and some other equipment such as stationary motors

with permanent connection to the fixed installation.

Measurement Category II is applicable to test and measuring circuits connected directly to utilization points

(socket outlets and similar points) of the low-voltage MAINS installation. Examples are measurements on

MAINS CIRCUITS of household appliances, portable tools and similar equipment.

TERMS USED IN THIS MANUAL

WARNING Identifies conditions and actions that could result in serious injury or even death

to the user.

CAUTION Identifies conditions and actions that could cause damage or malfunction in the

instrument.

WARNING STATEMENTS

To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The

meter is intended only for indoor use.

To avoid electrical shock hazard, observe the proper safety precautions when working with

voltages above 60 VDC or 30 VAC rms. These voltage levels pose a potential shock hazard to the

user. Before and after hazardous voltage measurements, test the voltage function on a known

source such as line voltage to determine proper meter functioning.

Keep hands/fingers behind the hand/finger barriers (of the meter and the test leads) during

measurement. Inspect test leads, connectors, and probes for damaged insulation or exposed metal

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

before using the instrument. If any defects are found, replace them immediately. Use only the test

leads provided with the equipment (or UL Listed Probe Assemblies rated CAT III 600V or better).

The accompanied test probe assembly meets UL/IEC/EN61010-031 Ed. 1.1 to the same meter

ratings or better. IEC 61010-031 requires exposed conductive test probe tips to be ≤4mm for CAT

III & CAT IV ratings. Refer to the category markings on your probe assemblies as well as on the add-

on accessories (detachable Caps or Alligator Clips, etc.), if any, for applicable rating changes.

This Clamp meter is designed to be clamped around or removed from un-insulated, hazardous live

conductors. Nonetheless, individual protective equipment must be used when hazardous live parts

in the installation, where the measurement is to be carried out, could be accessible.

Remove test leads from meter before taking clamp measurements.

CAUTION STATEMENTS

Disconnect the test leads from the test points before changing meter functions.

Disconnect the test leads from the meter before taking clamp measurements.

Do not use the device for a procedure that it is not intended for. This can cause damage to the

protection built into the instrument.

UL listing is not an indication or a verification of the accuracy of the meter

INTERNATIONAL ELECTRICAL SYMBOLS

Caution! Refer to the explanation in this Manual

Caution! Risk of electric shock

Earth (Ground)

Double Insulation or Reinforced insulation

Fuse

AC (Alternating Current)

DC (Direct Current)

Application around, and removal from, hazardous live conductors is permitted

CENELEC DIRECTIVES

The instruments conform to CENELEC Low-voltage directive 2014/35/EC, Electromagnetic

compatibility directive 2014/30/EU and RoHS directive 2011/65/EU.

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

3. Introduction

Thank you for selecting the FLIR Auto Range, True RMS 400A Clamp Meter with Low Pass

Filter and Accu-TipTM low current measurement technology.

All meters in this series measure 400A AC, 600V AC/DC, Resistance, Continuity,

Frequency, and Diode. Features include Non-Contact Voltage Detector, Data Hold,

MIN/MAX/AVG, and display backlighting.

The CM44 and CM46 also offer Capacitance, Peak, A DC (test leads), Relative/DC Zero,

and Thermocouple features.

The CM46 also provides DC, DC+ACV, and DC+DCA clamp measurements.

This device is shipped fully tested and calibrated and, with proper use, will provide years

of reliable service.

Key Features:

All Models

6000-count digital backlit display

600V AC/DC test lead measurements

Auto Range True RMS AC 400A AC clamp measurements

Low current Accu-TipTM clamp measurements

AC bandwidth frequency 50~400Hz (50~60Hz for ACV and AC+DCV)

Frequency measurements 50~400Hz for ACA and 50~999.9Hz for ACV

Resistance measurements to 60k ohms

Continuity and Diode measurements

Non-contact (NCV) Voltage Detection (EF)

Display Hold

Minimum/Maximum/Average recording memory

Integrated VFD mode (Low-pass filter) on ACV and Hz measurements

Intelligent Auto power OFF (APO)

Jaw opening: 30mm (1.2”)

Safety Category Rating: CAT III 600V & CAT IV 300V AC & DC

CM44 and CM46 Features

Capacitance measurements

DC A test lead current measurements

Peak-rms inrush current detect to 80ms

Thermocouple temperature measurements

Relative/DC Zero functions

CM46-only Features

AC+DC measurements

40/400A DC Clamp measurements

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

4. Description

4.1 Meter Parts

1. Non-contact voltage detector

2. Function select switch

3. LCD Display

4. Control buttons

5. Positive (+) Probe Input jack

6. COM (negative -) Probe Input jack

7. Clamp jaw trigger

8. Clamp jaws

9. Low current Accu-TipTM clamp area

Figure 4-1 Meter Description

Note: Battery compartment and Warning text label on back of meter.

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

4.2 Function Switch Positions

Switch the meter OFF (full power saving mode)

Measure AC/DC Voltage through the probe inputs

Measure electric field (EF) using the non-contact voltage detector

Measure AC or DC current through the clamp jaws (CM46)

Measure AC current in the large clamp jaw area (CM42 and CM44)

Measure low AC current through the small clamp jaw area (Accu-

TipTM). CM42 and CM44

Measure low AC or DC current through the small clamp jaw area (Accu-

TipTM). CM46

Measure resistance, continuity, and diode through the probe inputs.

The type of measurement is chosen by the mode button.

Measure capacitance and temperature through the probe inputs. The

type of measurement is chosen by the button. CM44 and CM46

Measure DC microamperes (current) through the probe inputs. CM44

and CM46

FLIR CM4x USER MANUAL Document ID: CM4x-en-US_AA

4.3 Function Buttons

Short presses to access and step through MIN-MAX-AVG recorded

readings. Long press to exit the mode.

Long press to access 80ms PEAK RMS mode. CM44 and CM46.

Short presses to step through available modes for selected function

Long press to switch the display backlight ON or OFF. Backlight

switches off automatically after 32 seconds (approx.).

Short presses to access/exit the display hold mode

Relative Zero CM44

Relative & DC Zero CM46

4.4 Display Icons and Indicators

Figure 4-2 Display Icon Descriptions

Refer to Fig. 4-2 above for the display icon descriptions below:

Meter is displaying maximum (up arrow), minimum (down arrow) or

average reading (up and down arrows)

80ms PEAK current/voltage rms mode

Low current Accu-TipTM mode

Auto range mode

Display Hold mode

Autres manuels pour CM42

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels FLIR Instrument de mesure

FLIR

FLIR Si124 Manuel utilisateur

FLIR

FLIR MR59 Manuel utilisateur

FLIR

FLIR CM72 Manuel utilisateur

FLIR

FLIR Extech Instruments HDV-WTX2 Manuel utilisateur

FLIR

FLIR CM275 Manuel utilisateur

FLIR

FLIR Extech Instruments PQ34-2 Manuel utilisateur

FLIR

FLIR EXTECH MA620 Manuel utilisateur

FLIR

FLIR Extech Instruments Oyster-10 Manuel utilisateur

FLIR

FLIR Extech Instruments 380193 Manuel utilisateur

FLIR

FLIR MR55 Manuel utilisateur

FLIR

FLIR Extech Instruments MA150 Manuel utilisateur

FLIR

FLIR IGM CM275 Manuel utilisateur

FLIR

FLIR MR277 Manuel utilisateur

FLIR

FLIR CM55 Manuel utilisateur

FLIR

FLIR Extech 380947 Manuel utilisateur

FLIR

FLIR EXTECH INSTRUMENTS PQ3450 Manuel utilisateur

FLIR

FLIR MR55 Manuel utilisateur

FLIR

FLIR Extech Instruments EX840 Manuel utilisateur

FLIR

FLIR Extech 380941 Manuel utilisateur

FLIR

FLIR MR59 Manuel utilisateur

FLIR

FLIR EXTECH HDV-WTX2 Manuel utilisateur

FLIR

FLIR CM94 Manuel utilisateur

FLIR

FLIR MR7 Manuel utilisateur

FLIR

FLIR EXTECH HDV-WTX2 Dimensions

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur