FLIR MR59 Manuel utilisateur
Quick Start
Ball Probe Moisture Meter
with Bluetooth®
Model MR59
Quick Start
INTRODUCTION
To obtain the detailed User Manual please visit http://support.flir.
com (download tab). Please read the user manual carefully before
use. The MR59 includes a 3-year limited warranty, visit www.flir.
com/testwarranty to read the warranty document and to register
your product.
QUICK STEPS
1. Ensure that a 9V battery is installed in the meter’s rear
compartment.
2. Long press the power button to switch the meter ON. The
meter will display ‘CAL’ while it performs a ZERO calibration
(keep hands and objects away from sensor during this
calibration).
3. The meter automatically switches OFF after 30 minutes (APO).
4. Place the ball sensor on the surface of the material under test.
The sensitivity of the sensor is uniform across its entire surface.
The sensor can detect moisture to a depth of 4 in (100 mm)
maximum.
5. Read the moisture level in %on the meter display. Take read-
ings in several locations for the best representation of the mois-
ture present.
6. Note the MAX and MIN moisture readings on the display. Long
press the CLEAR button to reset the MAX/MIN readings.
7. Long press the button to switch the meter’s backlight ON/
OFF.
8. Long press the button to switch the meter’s Work Light ON/
OFF.
9. To freeze/unfreeze a displayed reading, short press the HOLD
button.
10. The MR59 beeps when the moisture reading exceeds the high
alarm limit. To set the alarm limit, short press the SET button,
and then use the up /down arrows to set the value (press SET
again to exit). To enable/disable the alarm, long press the SET
button. When the alarm is enabled (default), the alarm bell icon
appears.
11. Refer to the Bluetooth section below, and the separate user
manual, for information on transmitting readings to a remote
device.
#NAS100096; r. AB/80574/80853; en-US 1
METER DESCRIPTION
1. Moisture sensor
2. Backlit LCD
3. Data Hold/MIN-MAX clear
4. Worklight ON/OFF and up arrow button
5. Backlight ON/OFF and down arrow button
6. Power button
7. Alarm SET/Alarm limit button
8. Work light
9. Tripod mount
10. Battery compartment
#NAS100096; r. AB/80574/80853; en-US 2
FUNCTION BUTTONS
Long press to power the meter ON/OFF
CLEAR
HOLD
Long press to clear MIN/MAX memories
Short press to access/exit Data Hold mode
SET
Long press to enable/disable the audible Alarm
Short press SET to access/exit the alarm threshold screen (use
the arrow buttons to change the threshold value)
In Alarm limit mode, increase the moisture alarm threshold
In Alarm limit mode, decrease the moisture alarm threshold
Long press to switch work light ON/OFF
Long press to the switch display backlight ON/OFF
DISPLAY DESCRIPTION
1. Bluetooth (BLE) icon (when connected)
2. Transmit icon (when connected)
3. Data Hold icon
4. Alarm enabled icon
5. Battery status icon
6. Maximum reading
7. Minimum reading
8. Moisture reading
#NAS100096; r. AB/80574/80853; en-US 3
BLUETOOTH COMMUNICATION
To connect to a remote device running FLIR Tools™, turn on the re-
mote device and start the FLIR Tools application. Open Instruments,
and search for the MR59 (the MR59 must be ON). Tap to connect
to the MR59. When connected to a device running the FLIR Tools
mobile app, the MR59 (using the METERLiNK®protocol) continu-
ally sends readings for live display on the remote device.
When connected to a compatible FLIR camera that supports BLE
(Bluetooth Low Energy), the MR59 continually sends meter read-
ings for live display on the camera screen. Download the FLIR Tools
mobile app from the Google Play™ store, the Apple App store, or
here:
https://www.flir.com/products/flir-tools-app/
1. When successful communication between the meter and a re-
mote device or FLIR camera is established, the Bluetooth icon
and the transmission icon appear on the meter display.
2. Refer to the FLIR Tools help utility in the mobile app for detailed
information regarding FLIR Tools.
Customer Support
Customer Support Telephone List: https://support.flir.com/contact
Repair, Calibration, and Technical Support https://support.flir.com
Three-Year Limited Warranty
This product is protected by FLIR’s 3-Year Limited Warranty. Visit
www.flir.com/testwarranty to read the 3-Year Limited Warranty
document.
#NAS100096; r. AB/80574/80853; en-US 4
#NAS100096; r. AB/80574/80853; en-US 5
last page
Publ. No.: NAS100096
Release: AB
Commit: 80574
Head: 80853
Language: en-US
Modified: 2021-10-31
Formatted: 2021-11-11
Website
http://www.flir.com
Customer support
http://support.flir.com
Copyright
© 2021, FLIR Systems, Inc. All rights reserved worldwide.
Disclaimer
Specifications subject to change without further notice. Models and accessories
subject to regional market considerations. License procedures may apply.
Products described herein may be subject to US Export Regulations. Please
Quick Start
Autres manuels pour MR59
2
Table des matières
Autres manuels FLIR Instrument de mesure
FLIR
FLIR Extech Instruments Oyster-10 Manuel utilisateur
FLIR
FLIR MR160 Manuel utilisateur
FLIR
FLIR CM85 Manuel utilisateur
FLIR
FLIR Si124 Manuel utilisateur
FLIR
FLIR CM78 Manuel utilisateur
FLIR
FLIR VS80C10-25RM Manuel utilisateur
FLIR
FLIR CM275 Manuel utilisateur
FLIR
FLIR Extech Instruments EX840 Manuel utilisateur
FLIR
FLIR EXTECH HDV-TX1 Dimensions
FLIR
FLIR EXTECH SDL310 Manuel utilisateur
FLIR
FLIR CM174 C Manuel utilisateur
FLIR
FLIR CM55 Manuel utilisateur
FLIR
FLIR identiFINDER R200 Manuel utilisateur
FLIR
FLIR Extech Instruments 380193 Manuel utilisateur
FLIR
FLIR Extech Instruments 480823 Manuel utilisateur
FLIR
FLIR MR277 Manuel utilisateur
FLIR
FLIR Extech EX612 Manuel utilisateur
FLIR
FLIR MR55 Manuel utilisateur
FLIR
FLIR EXTECH HDV-WTX2 Manuel utilisateur
FLIR
FLIR identiFINDER R200 Manuel utilisateur
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur