FeiYu Tech G6 Manuel utilisateur
3-Axis Stabilized Handheld Gimbal
Guilin Feiyu Technology Incorporated Company
User Manual EN V1.0
1
1. Product Overview
The showing sports camera is only for reference
*
1/4-20 Thread mount
Pan axis
Positioning pin
Trigger button
Vertical arm
Tilt axis
Roll axis
Single hand grip
Retaining ring
Cross arm
Retainer plate
Thumb screw
Micro USB port
Function button
Screen capture
button
Display
Joystick
1/4-20 Thread mount
Retainer bar
Shoot button
Micro USB cable X1
26650 Li-ion
battery X1
Type C camera
charging cable
Included items
2
2. Quick Start Guide
1Insert Battery
2Insert Camera
Please fully charge the battery before powering on the gimbal for
the first time.
Please install the camera before powering on the gimbal.
When not in use, turn off the gimbal and then remove the camera.
Remove the bottom cap, insert a 26650 battery and
then replace the cap.
1-Normal Position1-Normal Position
Option 1
2-Reverse Position2-Reverse Position
Option 2
To install RX0 camera, please change RX0 camera connection kit.
RX0 Adapter
Plate
1
2
3
Insert RX0 Camera
*RX0 camera connection kit is optional.
* It is suggested to turn on the camera before installation for normal position.
（1）Loose and take down the original fixed plate of the gimbal
（2）Install RX0 adapter plate and tighten the screw
（3）Insert the set screw of the camera from the bottom of RX0 adapter plate
（4）Place the camera and tighten the set screw
Replacement steps
1 2
3
Install the camera on retainer plate,then fix the camera with
retainer bar and screw.
Take the Gopro HERO 5 camera for example.
3
3Balance the Gimbal
Best balance
Right-tilting
Left-tilting
If camera tilts to the left, loosen the retaining ring ,pull cross arm out to the right until camera is horizontal.
If camera tilts to the right, loosen the retaining ring ,push cross arm in to the left until camera is horizontal.
4Power on / off
Best balance
Power on / off: Long press the function button, the display will show and release it when you hear the beep tone.
Cross arm
Retaining
ring
Cross arm
Retaining
ring
4
Connect the camera with the gimbal via
Tpye C camera charging cable, the camera
can be charged when gimbal is power on.
1Gimbal Charging
2Charging for Camera
3. Charging
Type C
Portr
Type C
Port
USB Port
Camera G6
Type C Port Micro Port
Type C
camera
charging cable
Micro port USB port
Micro USB
cable
Option 1: Charging with micro USB cable.
(Equipped by user)
Input： 5V/2A
Option 2: Remove the battery and charge the battery with charger(equipped by user).
Camera power-
supply port
Camera power-
supply port
Charging
Charging icons on display screen
Charging
completes
connect the camera with the gimbal via type c
camera charging cable, the camera can be
charged when the gimbal is powered on.
5
4. Functions
Instructions of Button
Note: the firmware upgrade may occur manual operation function and the actual product features do not match. Please get the latest version manual on the official website.
Under follow mode, control the rolling axis by moving the joystick
to the left or right, and the control angle is -30 °~ +30°
Interface for
camera parameters
Swith shooting modes /
main interface
Explanation configuration
Long press in the main interface can switch to the congiguration interface
for camera parameters
In the panning mode or follow mode, press and hold the button to enter
the lock mode, release it to return previous mode
Single tap in the main interface can switch to the shoot modes (camera needs to be
connected)
Single tap in the interface for camera parameters can switch to the main interface
Double tap
Long press
Single tap
Press and hold Lock
Five tap
Quadruple tap
Triple tap
Double tap
Single tap Panning Mode / Lock Mode
Single tap to switch between panning mode and lock mode
Follow mode
Rotate 180° in horizontal Make the camera lens rotate 180 °
Auto-rotation Mode Enter auto-rotation mode
Initialization Enter initialization
Reset
Return to panning mode, tilting ,rolling and panning to return to initial level
Please refer to the Chapter "Auto-rotation Mode" in
page 7~8
Please refer to the Chapter "Gimbal Initialization" in page 11
Function button Function Explanation
Trigger button Function Explanation
Screen capture button Function
make the gimbal rotate 180
please find the latest manual on the official website
6
Single tap on the screen capture button can switch
the shooting modes
After connecting the gimbal to camera via Feiyu On App,
single tap the button can control the camera for shooting
Screen capture button operation
Shoot button operation
Modes
Panning Mode (Default mode )
The rolling and tilting direction are fixed, and the camera
moves according to the hand movement direction of the
user.
Follow Mode
The rolling direction is fixed, and the camera moves
according to the hand movement direction of the user.
Lock Mode
The orientation of the camera is fixed.
Reset
Display status Mode / Status
HF
AF
Panning mode
Follow mode
Lock mode
LK
SET WIFI FOR APP Prompt for users to open the App
settings in order to connect via WiFi
Display Description
The current mode of the gimbal can be identified by the
display status
Bluetooth is connected
Bluetooth is not connected
Camera photo shooting
Camera video shooting
Camera time-lapse video shooting
WiFi is connected
WiFi is not connected
Battery level
Camera is not connected
Function Button
Shoot Button
Move to left / right Switch content
Joystick
Screen capture
button
Display
Left Right
Using the joystick
setting parameters
Up
Down
W4K
OK
W12MP
OK
W4K
OK30
Screen
capture
button
Long press
Screen
capture
button
Long press
Screen
capture
button
Long press
Field of View
Confirm Button
Resolution
Frame Rate
Mega Pixel
HF
HF
HF
Setting Parameters
Note: The parameters interface shall be different when connecting to RXO camera
Move to right again
for confirmation
Move to right until
“OK” displays
Move to up / down Setting parameters
Time-lapse
video shooting
Photo shooting
Video shooting
Shooting mode
HF
Main interface of
the display screen
① Please refer to the chapter "Connecting to camera" in page 10
①
①
Return to panning mode, all to return
to default.
Main interface of
the display screen Interface for camera
parameters
return to panning mode to return
to default
7
Manual Lock
Manually move camera to desired position,and hold for half a
second.New tilt and/or pan positions are automatically saved.
Camera can be manually positioned while in lock mode ,follow
mode or panning mode. Both the pan and tilt can be manually
set.
Auto-rotation Mode
The G6 gimbal can easily create constant speed moves by using the autorotation mode. This mode can be used for
recording both regular video and timelapse photography. For better results, attach gimbal to the FeiyuTech tripod,
or other tripod, to keep it completely still.
( 1 ) Set rotation speed in Feiyu ON App
Note: both the panning and tilting directions can be rotated.
G6
Rotation speed
18s/
turn
12s/
turn
24s/
turn
30s/
turn
1min/
turn
2min/
turn
15min/
turn
8min/
turn
4min/
turn
4h/
turn
1h/
turn
(default)
8h/
turn
30min/
turn
Connect to the Feiyu ON App and select desired speed from the auto-rotation mode rate option in the settings menu.
8
Record the first position (rotation start position) by manually
moving camera to desired position. Hold in position for half a
second. Click the function button to record rotation start position.
( 3 ) Set rotation start position
Record the second position (rotation end position) by manually
moving camera to desired position. Hold in position for half a
second. Click the function button to record rotation end position.
( 4 ) Set rotation end position
The gimbal automatically restores to the start position,
while the tilt axis and pan axis start rotating at a constant speed
according to the set rotation speed to the rotation end position
and enter the panning mode at the end position.
( 5 ) Start auto rotating
( 2 ) Enter auto-rotation mode by clicking the
function button 4 times
Function
button
(1)
After finishing the auto rotation, the gimbal shall automatically exit the auto-rotation mode and enter panning mode.
(2) In the process of entering auto-rotation mode or auto-rotation setting, double click the trigger button to exit the auto-rotation mode
and reset.
Function
button
Tilting
Panning
Exit:
Tilting
Panning
Function
button
Pan axis
Tilt axis
Autres manuels pour G6
2
Table des matières
Autres manuels FeiYu Tech Accessoires pour appareils photo
FeiYu Tech
FeiYu Tech SCORP Pro F4 Manuel utilisateur
FeiYu Tech
FeiYu Tech SCORT-C F2C Manuel utilisateur
FeiYu Tech
FeiYu Tech AK2000 Manuel utilisateur
FeiYu Tech
FeiYu Tech G3Ultra Manuel
FeiYu Tech
FeiYu Tech A2000 Manuel utilisateur
FeiYu Tech
FeiYu Tech G4S Manuel utilisateur
FeiYu Tech
FeiYu Tech AK2000 Manuel utilisateur
FeiYu Tech
FeiYu Tech AKFI Manuel utilisateur
FeiYu Tech
FeiYu Tech AK4500 Guide d'installation
FeiYu Tech
FeiYu Tech FY G4 Manuel utilisateur
FeiYu Tech
FeiYu Tech SPG Manuel utilisateur
FeiYu Tech
FeiYu Tech G5 Manuel utilisateur
FeiYu Tech
FeiYu Tech FY-G4 GS Manuel utilisateur
FeiYu Tech
FeiYu Tech a1000 Manuel utilisateur
FeiYu Tech
FeiYu Tech SCORP F2 Manuel utilisateur
FeiYu Tech
FeiYu Tech WG2 Manuel utilisateur
FeiYu Tech
FeiYu Tech VIMBLE 3 Manuel utilisateur
FeiYu Tech
FeiYu Tech G6 Guide d'installation
FeiYu Tech
FeiYu Tech VB4 Manuel utilisateur
FeiYu Tech
FeiYu Tech G5 Manuel utilisateur
