Ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Manuel utilisateur

USER GUIDE

DISTRIBUTION PLATE

EKQuantum

Reﬂection2Torrent DDC 4.2 PWM D-RGB – Plexi

The installation of the product is intended to be undertaken by

an adequately trained and experienced person. You are installing

the product at your own risk. If you are not sufficiently trained

or experienced or feel unsure about the installation procedure,

please refrain from installing the product yourself and contact

our tech support for assistance. We disclaim our liability for any

damages to the product and incidental, consequential, or indirect

damages incurred due to improper or inappropriate installation.

Before you start using this product, please follow these basic guidelines:

Read this manual carefully before beginning the installation

process.

The EK-Quantum Torque ﬁttings require only a tiny amount

of force to screw them ﬁrmly in place since the rubber O-ring

gaskets ensure the liquid seal.

Corrosion-inhibiting purpose-made coolants are always

recommended for any liquid cooling system. EK recommends

EK-CryoFuel coolants for worry-free usage.

- 3 -

TABLE OF CONTENT

BOX CONTENT 4

DISTRIBUTION PLATE DIMENSIONS 5

TECHNICAL SPECIFICATIONS AND PRODUCT PARTS 6

PREPARING THE FRACTAL TORRENT CHASSIS 7

OPTIONAL: INSTALLING THE BOTTOM RADIATOR IN THE FRACTAL TORRENT CHASSIS 8

PREPARING THE EK-Quantum Reﬂection2Torrent DDC 4.2 PWM D-RGB DISTRIBUTION PLATE 9

INSTALLING THE EK-Quantum Reﬂection2Torrent DDC 4.2 PWM D-RGB DISTRIBUTION PLATE INTO CHASSIS 11

RECOMMENDED DISTRIBUTION PLATE CONFIGURATIONS 13

FLOW DIAGRAM 14

CONNECTING THE D-RGB LED STRIP 15

CONNECTING THE PUMP 15

TESTING THE LOOP 16

SUPPORT AND SERVICE 17

SOCIAL MEDIA 17

- 4 -

BOX CONTENT

8 mm

6 mm

4 mm

EK-Quantum Reﬂection2Torrent

DDC 4.2 PWM D-RGB – Plexi

Metal Radiator Bracket IDENT: 106328

M4 x 8 DIN7991 Screw (2 pcs

M4 x 6 DIN7984 Screw (2 pcs)

M4 x 4 DIN7984 Screw (6 pcs)

M4 x 0.8 Metal Washer (2 pcs)

2.5 mm Allen Key (1 pc)

EK-Loop Multi Allen Key (1 pc)

Mounting Mechanism: Reﬂection2Torrent DDC 4.2 PWM – IDENT: 105703

- 5 -

DISTRIBUTION PLATE DIMENSIONS

14 mm

56.8 mm

91.6 mm

111.9 mm

132.2 mm

161.6 mm

181.9 mm

202.2 mm

230.2 mm

258.2 mm

312 mm

333 mm

62 mm

72 mm

80.4 mm

90.3 mm

118.3 mm

145.6 mm 40.4 mm

31.4 mm

27.4 mm27.4 mm

40.4 mm

31.4 mm

- 6 -

TECHNICAL SPECIFICATIONS AND PRODUCT PARTS

Technical Speciﬁcation:

Dimensions with the attached pump (W x D x H): 145.6 x 40.4 x 333 mm

– D-RGB LED count: 18

– D-RGB cable length: 500 mm

– D-RGB connector: standard 3-pin (+5V, Data, Blocked, Ground)

Position EAN Description Quantity

1105689 TOP Plexi (Block part) 1

2105694 Inox Backplate 1

3105690 TOP Plexi (Lid part) 1

43831109837580 EK-DDC 4.2 PWM (12V SATA) 1

55154 OR 52 x 3 NBR50 1

69018 Screw M4 x 25 DIN7984 4

78207 Screw M4 x 14 DIN7991 33

8101556 LED D-RGB strip 500/300 mm 1

9102639 EK - Plug G1/4 9

10 105693 LED Cover (Black) 1

11 104599 Mylar sticker 1

12 8472 Screw M3 x 6 DIN7991 12

13 105697 OR - 216 x 2 1

14 105698 OR - 75 x 2 1

15 105699 OR - 151 x 2 1

16 105700 OR - 19 x 2 2

17 105701 OR - 85 x 2 1

18 105702 OR - 55 x 2 1

19 3831109834282 Plug cover (Acetal) 9

- 7 -

PREPARING THE FRACTAL TORRENT CHASSIS

STEP 1

Remove the front and side panels of your Fractal Torrent case.

STEP 2

Remove the front fans with upper and lower front bracket covers.

Then unscrew the bottom bracket thumb screws and carefully

pull them outside the case. If you are installing a bottom radiator,

remove all fans from the bottom of the case. Otherwise, you just

need to remove the one closest to the front panel.

Before inserting the EK-Quantum Reﬂection2 Torrent DDC 4.2

PWM D-RGB – Plexi distribution plate, you must remove all the

abovementioned elements.

STEP 1

STEP 2

Remove just

this fan if you

aren’t using

a bottom

radiator.

LOWER FRONT

BRACKET COVER

UPPER FRONT

BRACKET COVER

- 8 -

STEP 2

Once you have successfully pulled the bottom bracket outside the

chassis, mount the radiator and carefully tighten the screws without

completely ﬁxing it in place. This step is crucial if you want to install

hard tubing without difﬁculties.

STEP 2

OPTIONAL: INSTALLING THE BOTTOM RADIATOR IN THE FRACTAL TORRENT CHASSIS

STEP 1 For this step, you need:

Important: These steps are to be followed if you are

using the EK-Quantum Surface P240 radiator and hard

tubing. 360mm or longer radiators cannot be used in the

bottom of the chassis when EK-Quantum Reﬂection2

Torrent DDC 4.2 PWM D-RGB distribution plate is

installed. Also note that EK-Loop Vertical GPU holder is

NOT compatible with the bottom radiator in this case.

STEP 1

Position the Quantum Surface ﬁttings and end tank plugs as seen

in the image so that you can use tubing parallel to the longest side

of the radiator.

EK-Loop Multi Allen Key

- 9 -

STEP 3

Place the bottom bracket with the installed radiator inside the

chassis and tighten the thumb screws. After that, move the radiator

as far back as possible against the PCI slot brackets.

STEP 3

PREPARING THE EK-Quantum Reﬂection

Torrent DDC 4.2 PWM D-RGB DISTRIBUTION PLATE

STEP 1

Take the metal radiator bracket and tighten it on the EK-Quantum

Reﬂection2 Torrent DDC 4.2 PWM D-RGB distribution plate with two

(2) M4x8 DID7991 screws from the mounting mechanism packaging.

For this step, you need:

2.5 mm Allen Key

M4 x 8 DIN7991 SCREW

METAL R ADIATOR

BRACKET

- 10 -

STEP 2

Optional Step 2.1 (Using the Front and Bottom Radiator – GREEN)

Install the following in this sequence: EK-Quantum Torque Extender

Rotary MF 14mm, EK-Quantum Torque Angled – 90°, and EK-

Quantum Torque HTC ﬁtting on the radiator port closer to the

distribution plate. EK-Torque HTC ﬁttings should be installed on the

other radiator port and the bottom two distribution plate holes.

Optional Step 2.2 (Using the Front Radiator Only – RED):

Execute the previous “GREEN” steps with an additional EK-Quantum

Torque Extender Static MF 28mm for the radiator port further from

the distribution plate.

After either of these steps, push the radiator on the bracket with

ports on the bottom, as seen in the image. Make sure you cut the

tubes just right, with the position of the radiator matching the

screw holes on the metal bracket. We suggest the shorter tube be

51 mm and the longer one 107 mm. Once you’re ﬁnished with the

placement, tighten the radiator screws.

Important: Optional steps apply when using EK-

Quantum Surface P360 or P240 radiators, or in case of

S360 and S240 radiators when extra 14 mm extenders on

both radiator ports are needed.

STEP 2

TORQUE ROTARY

90° FITTING

14mm EXTENDER

28mm + 14mm

EXTENDER

FITTING

Autres manuels pour EK-Quantum Reflection2 PC-O11D EVO D5 PWM...

Table des matières

Autres manuels ekwb Matériel informatique

ekwb

ekwb EK-FB ASRock X399 RGB Monoblock Manuel utilisateur

ekwb

ekwb EK-XTOP Revo Dual D5 Serial Manuel

ekwb

ekwb EK-FC980 GTX Ti Classy KPE Series Manuel

ekwb

ekwb EK-PRO GPU WB RTX A100 80GB Manuel utilisateur

ekwb

ekwb EK-FC1080 GTX G1 Manuel utilisateur

ekwb

ekwb EK-FB ASUS PRIME X299 Monoblock Manuel utilisateur

ekwb

ekwb EK-Classic 115x/20xx D-RGB Manuel utilisateur

ekwb

ekwb EK-FC285 GTX Classified Manuel

ekwb

ekwb EK-MOSFET ASUS M6G Mode d’emploi

ekwb

ekwb EK-FC780 Mode d’emploi

ekwb

ekwb EK-FC7970 Manuel

ekwb

ekwb EK-Loop Manuel utilisateur

ekwb

ekwb EK-FC6990 Manuel

ekwb

ekwb EK-FB ASUS X58 Mode d’emploi

ekwb

ekwb EK-Pro CPU Water Block SP5 Manuel utilisateur

ekwb

ekwb EK-FC4890CF Mode d’emploi

ekwb

ekwb EK-FC970 GTX TF5 Manuel

ekwb

ekwb EK-FC1080 GTX JetStream Backplate Mode d’emploi

ekwb

ekwb EK-FC1080 GTX TF6 Backplate Manuel

ekwb

ekwb EK-FC1080 GTX Backplate Mode d’emploi

ekwb

ekwb EK-FB MSI X299 GAMING PRO CARBON Monoblock Manuel utilisateur

ekwb

ekwb EK-FC750 GTX Series Manuel utilisateur

ekwb

ekwb EK-Quantum Volume FLT Series Manuel utilisateur

ekwb

ekwb EK-Quantum Reflection2 PC-O11D EVO D5 PWM... Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur