Digital Equipment DECLASER 1152 Manuel utilisateur

DEClaser1152Printer

User’sGuide

Order Number: EK–DECLP–UG. A01

Digital Equipment Corporation

Maynard, Massachusetts

First Printing, September 1992

The information in this document is subject to change without notice and should not be

construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation

assumes no responsibility for any errors that may appear in this document.

The software described in this document is furnished under a license and may be used or copied

only in accordance with the terms of such license.

No responsibility is assumed for the use or reliability of software on equipment that is not

supplied by Digital Equipment Corporation or its afﬁliated companies.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to

restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer

Software clause at DFARS 252.227-7013.

Printed in U.S.A.

The following are trademarks of Digital Equipment Corporation: A–to–Z, DECnet, DECprint,

DECwindows, DECwrite, MicroVAX, MicroVMS, OpenVMS, PrintServer, Scholar, TK, ULTRIX,

VAX, VAXcluster, VAX DOCUMENT, VAXstation, VMS, VT, and the DIGITAL logo.

PostScript is a registered trademark of Adobe Systems, Incorporated, which may be registered

in certain jurisdictions. AppleTalk, Localtalk, LaserWriter, and Macintosh are registered

trademarks of Apple Computer, Inc. Microsoft, MS, and MS–DOS, are registered trademarks

of Microsoft Corporation. Windows is a trademark of Microsoft Corporation. Centronics is a

trademark of Centronics Data Computer Corporation. IBM is a registered trademark and IBM

PC/AT is a trademark of International Business Machines Corporation. LaserJet and PCL are

registered trademarks of Hewlett-Packard Company. Palatino is a trademark of Linotype-Hell

AG. Times and Helvetica are registered trademarks of Allied Corporation. The following are

registered trademarks of International Typeface Corporation: ITC Avant Garde Gothic Book, ITC

Avant Garde Gothic Demi, ITC Bookman Demi, ITC Bookman Light, ITC Lubalin Graph Book,

ITC Lubalin Graph Demi, ITC Souvenir Demi, ITC Souvenir Light, ITC Zapf Chancery, ITC

Zapf Dingbats.

S1866

This document was prepared using VAX DOCUMENT, Version 2.1.

FCC NOTICE:

115 Volt model only

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. Any changes or modiﬁcations made

to this equipment may void the user’s authority to operate this equipment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

• Consult the dealer or an experienced radio/TV technician for help.

To meet FCC requirements a properly shielded parallel cable is required to connect the device to

a personal computer or other Class B device.

This document was prepared using VAX DOCUMENT, Version 2.1.

Contents

Preface ..................................................... vii

Part 1: Basic Operations

1 Installing and Using the DEClaser 1152 Printer with a PC

1.1 Connecting the DEClaser 1152 Printer to the PC . . .......... 1–1

1.2 Adding the DEClaser 1152 Printer to the MS-Windows Printers

Menu . . . ........................................... 1–3

1.3 Printing a File from MS-Windows ........................ 1–5

1.4 Printing a File from the MS–DOS Command Line. . .......... 1–5

1.5 If Your File Does Not Print . . ........................... 1–6

1.6 Finding Help ........................................ 1–7

2 Installing and Using the DEClaser 1152 Printer with a

Macintosh Computer

2.1 Connecting the DEClaser 1152 Printer to the Macintosh ....... 2–1

2.2 Adding the DEClaser 1152 Printer to the Chooser Menu ....... 2–2

2.3 Printing a File ....................................... 2–3

2.4 Finding Help ........................................ 2–4

3 Installing and Using the DEClaser 1152 Printer in VMS and

ULTRIX Environments

3.1 Printing Files in VMS ................................. 3–1

3.2 Printing PostScript Files in ULTRIX . . ................... 3–1

3.3 Finding Help ........................................ 3–1

Part 2: Advanced Operations

4 Setting Up Multiple Communications Channels

5 Fonts

6 Enhancing Picture Quality

6.1 Beneﬁts of DECimage ................................. 6–1

6.2 When to Use DECimage................................ 6–3

6.3 Setting Up DECimage on VMS Platforms .................. 6–3

6.4 Invoking DECimage on VMS Platforms . ................... 6–5

6.5 Using DECimage on Non-VMS Platforms .................. 6–5

6.5.1 Invoking DECimage for the Current Print Job . .......... 6–6

6.5.2 Invoking DECimage Persistently . . . ................... 6–6

6.6 Setting Parameters ................................... 6–7

6.6.1 Setting the Punch Parameters ........................ 6–7

6.6.2 Setting the Sharpness . . . ........................... 6–8

6.6.3 Setting the Dotsize................................. 6–9

6.7 Setting Up DECimage for Special Effects .................. 6–9

6.7.1 DECimage for VMS Setup Modules . ................... 6–10

6.7.2 DECimage for Non-VMS Systems . . ................... 6–10

A Adobe PCL4 Emulation

Figures

4–1 Communication Channels on the DEClaser 1152 Printer. . . . 4–1

6–1 Pictures With and Without DECimage .................. 6–2

Tables

6–1 Setting Values to Change Picture Characteristics ......... 6–9

Preface

Who Should Read This Guide

This guide is helpful to every user, from the novice to the system manager.

How to Read This Guide

This guide is divided into two sections:

•Part 1 — Basic Operations

This section helps you set up your DEClaser 1152 on your PC, Apple

Macintosh, ULTRIX, or VMS system, and start printing right away. This

section assumes that the printer is set to the factory default settings. The

best way to use this section is to read the chapters that apply to your

operating system. It is not necessary to read the entire book sequentially.

•Part 2 — Advanced Operations

This section explains how to take advantage of the features of the

PostScript Level 2 DEClaser 1152 printer. This section covers these

topics:

• Using multiple communications channels

• Accessing and using fonts

• Using DECimage for picture enhancement

This guide does not cover all the features of the DEClaser 1152 printer

or your operating system. For more information about your printer,

see the DEClaser 1152 Printer Installation/Operator’s Guide. For more

information about your operating system commands and features, refer to

your host documentation.

vii

PostScript Level 2 Features

The DEClaser 1152 is an Adobe PostScript Level 2 printer. A Level 2

PostScript printer includes all of the Level 1 operators with the additional

Level 2 operators. Although most Level 1 drivers will properly control the

DEClaser 1152, you will require a Level 2 driver to take advantage of the

beneﬁts of PostScript Level 2. PostScript Level 2 drivers are available from

your vendors.

Some of the beneﬁts of PostScript Level 2 are:

• Better performance for some compute-intensive jobs

• Better memory management for processing complex jobs

• Multiple-host capabilities

• Better control of some graphics capabilities

• Built-in ﬁle compression/decompression utilities

• Backward compatibility with Level 1 applications

This guide does not attempt to describe the language in detail, but will show

you how to set-up and use some of your DEClaser 1152’s Level 2 features.

For a complete description of the PostScript Level 2 language, refer to the

PostScript Language Reference Manual, Second Edition.

Software Requirements

When you print to the DEClaser 1152 printer, you may use any commands

your operating system supports. To use the commands listed in the following

chapters, this guide assumes that your operating system has the following

software installed:

Operating System Required Software

MS–DOS MS–DOS, Version 4.01 or higher

Microsoft Windows Microsoft Windows, Version 3.0 or higher

Apple Macintosh Apple Macintosh, System 6, System 7

ULTRIX ULTRIX, Version 4.0

VMS DECprint Supervisor for OpenVMS, Version 1.0

viii

PostScript and PCL4 Files

The DEClaser 1152 printer primarily a PostScript printer. For applications

that do not have a PostScript printer driver, the DEClaser 1152 printer

provides Hewlett-Packard PCL4 emulation as an alternate language interface.

These two language interfaces are quite different in nature. This section

describes the differences between the two languages.

PostScript is a programming language designed to efﬁciently create what is

known as a ‘‘Page Description.’’ PostScript is a Page Description Language

(PDL). While PostScript is composed of only the printable ASCII characters,

it is not necessarily these characters that get printed on your printer. When

the DEClaser 1152 printer receives a PostScript ﬁle, the built-in PostScript

interpreter parses the ﬁle for instructions on how to create and lay out the

images and text to be placed on the paper.

The emulation of Hewlett_Packard’s PCL4 language is created from within

the PostScript interpreter. PCL4 is a Printer Control Language composed of

ASCII text embedded with special sequences of printer control instructions

that are preceded with the ASCII decimal 27 character, more commonly known

as the Escape character. The collection of printer control instructions is known

as escape sequences. With very few exceptions, the PCL4 emulator produces

output equivalent to the Hewlett-Packard LaserJet IIP printer.

When conﬁguring the printer drivers in the following sections, keep in mind

that the DEClaser 1152’s communication channels are ready to interpret the

incoming data as a PostScript Language program.

Conventions

The following terms and conventions are used in this guide.

Term/Convention Meaning

Note Provides additional information.

Caution Provides information for preventing equipment or

software damage.

Warning Provides information for preventing personal injury.

Bullet (



) A bulleted statement in a procedure describes a result

after performing a step.

Bold type Text in boldface designates messages that appear on the

control panel and menu options in DECwindows.

Term/Convention Meaning

filename

Represents a generic ﬁle name. Replace it with the name

and extension of your ﬁle, using your operating system’s

syntax.

queuename

Represents a generic queue name. In commands, replace

it with the name of a real queue.

ENTER Represents the key to press on the control panel.

Part1:

Basic Operations

The following chapters describe how to send a print job to the DEClaser

1152 printer from different platforms using the factory default settings of

the printer. The following DEClaser 1152 factory default settings satisfy the

requirements for most single-host conﬁgurations:

• Three enabled communications channels:

1. Parallel (Centronics)

2. Serial (Either EIA-232 or DEC423, not both)

3. LocalTalk

• All communications channels interpret the incoming data as PostScript.

• The serial communications settings are:

9600 Baud

8 Data Bits

1 Stop Bit

No Parity

XON/XOFF ﬂow control

To change the default settings of the printer, see the DEClaser 1152 Printer

Installation/Operator’s Guide, which lists other settings that may also be

selected. See Chapter 4 to use this printer in a multihost conﬁguration.

Table des matières

Autres manuels Digital Equipment Imprimante

Digital Equipment

Digital Equipment LGplus Series Manuel utilisateur

Digital Equipment

Digital Equipment LA30 N Manuel utilisateur

Digital Equipment

Digital Equipment LN17ps Manuel utilisateur

Digital Equipment

Digital Equipment LA600 MultiPrinter Manuel utilisateur

Digital Equipment

Digital Equipment DECwriter 500i Manuel utilisateur

Digital Equipment

Digital Equipment PrintServer 32 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 2200 Manuel utilisateur

Digital Equipment

Digital Equipment LA310 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel

Digital Equipment

Digital Equipment DEClaser 2100 plus Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 1100 Series Manuel utilisateur

Digital Equipment

Digital Equipment LA310 Manuel utilisateur

Digital Equipment

Digital Equipment LA50 Manuel utilisateur

Digital Equipment

Digital Equipment LA400plus Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel utilisateur

Digital Equipment

Digital Equipment Colorwriter LSR 2000+ Manuel utilisateur

Digital Equipment

Digital Equipment Letterprinter 100 Manuel

Digital Equipment

Digital Equipment LA600 MultiPrinter Guide de démarrage rapide

Digital Equipment

Digital Equipment LSR 2000 Manuel utilisateur

Digital Equipment

Digital Equipment LG06 Manuel utilisateur

Digital Equipment

Digital Equipment LB12 Instructions d'installation

Digital Equipment

Digital Equipment LV8 Manuel utilisateur

Digital Equipment

Digital Equipment LG plus Series Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur