Digital Equipment LG31 Guide de l'administrateur

LG31 Printer

Installation/Operator’s Manual

Order Number EK-LG31E-IN-002

Digital Equipment Corporation

1st Edition, November 1987

2nd Edition, June 1989

The information in this document is subject to change without notice and should

not be construed as a commitment by Digital Equipment Corporation. Digital

Equipment Corporation assumes no responsibility for any errors that may appear

in this document.

The software described in this document is furnished under a license and may

be used or copied only in accordance with the terms of such license.

No responsibility is assumed for the use or reliability of software on equipment

that is not supplied by Digital Equipment Corporation or its afﬁliated companies.

Printed in U.S.A.

The READER’S COMMENTS form on the last page of this document requests

the user’s critical evaluation to assist in preparing future documentation.

The following are trademarks of Digital Equipment Corporation:

DEC DIBOL UNIBUS

DEC/CMS EduSystem VAX

DEC/MMS IAS VAXcluster

DECnet MASSBUS VMS

DECsystem–10 PDP VT

DECSYSTEM–20 PDT

DECUS RSTS

DECwriter RSX

This document was prepared using VAX DOCUMENT, Version 1.1

Contents

Preface xi

Chapter 1 GENERAL INFORMATION

1.1 Overview ............................................1–1

1.2 General Description ....................................1–1

1.3 Major Components .....................................1–2

1.3.1 Control Panels . . . ..............................1–2

1.3.2 Printer Mechanism .............................1–4

1.3.3 Control Electronics..............................1–4

1.3.4 Serial Interface . . ..............................1–4

1.3.5 Power Supply ..................................1–4

1.4 Printed Circuit Boards ..................................1–4

1.5 Printer Feature Summary . ..............................1–5

1.6 Speciﬁcations . . . ......................................1–6

1.6.1 LG31 Printer Speciﬁcations . ......................1–6

1.6.2 Resident Fonts . . . ..............................1–8

1.6.3 Recommended Paper Weights .....................1–8

1.6.4 Print Speeds ..................................1–9

1.6.5 Resident Character Sets.........................1–10

iii

Chapter 2 INSTALLATION AND CHECKOUT

2.1 Overview ............................................2–1

2.2 Unpacking ...........................................2–2

2.2.1 Inspection ....................................2–2

2.2.2 Unpacking Procedure ............................2–3

2.3 Installation .........................................2–11

2.3.1 Print Ribbon Cartridge .........................2–11

2.4 Apply Power to the LG31 . . .............................2–12

2.5 Powering and Testing the LG31 Printer....................2–14

2.6 Host To LG31 Printer Set-up Procedure....................2–16

2.6.1 Interface Control Strap Settings ..................2–16

2.6.2 Serial Interface Settings for VAX/VMS. . ............2–16

2.6.3 RSX Settings .................................2–17

2.6.4 RT-11 Settings . . . .............................2–17

2.6.5 RSTS/E Settings . .............................2–18

2.7 Connecting the Host to the LG31 Printer ..................2–19

Chapter 3 CONTROLS AND INDICATORS

3.1 Introduction ..........................................3–1

3.2 Power Switch ON/OFF ..................................3–1

3.3 Outer Control Panel ....................................3–3

3.3.1 Outer Control Panel Components ..................3–4

3.3.2 Outer Control Panel Keys . . ......................3–5

3.4 Top Cover Interlock Switch ..............................3–5

3.5 Inner Control Panel ....................................3–7

3.5.1 Three-Character LED Display ....................3–10

3.5.2 Audio Alarm..................................3–10

3.5.3 Initialization Switch............................3–11

3.5.4 Key Functions . . . .............................3–12

3.6 Paper Tension Lever ..................................3–16

3.7 Print Gap Control ....................................3–17

3.8 Margin Adjust Knob...................................3–17

Chapter 4 SETTING COMMUNICATIONS AND PRINT

PARAMETERS

4.1 Introduction ..........................................4–1

4.2 Interface Control—Host to Printer Interface .................4–2

4.3 Conﬁguration Menu ....................................4–5

4.3.1 Listing the Parameters ..........................4–5

4.3.2 Communications Parameters ......................4–8

4.4 Print Characteristics ..................................4–14

4.4.1 Font . . . .....................................4–14

4.4.1.1 Style..................................4–16

4.4.1.2 CPI...................................4–17

4.4.1.3 Country (Character Sets) ..................4–18

4.4.1.4 Mode .................................4–19

4.4.1.5 Horizontal Expansion.....................4–20

4.4.1.6 Vertical Expansion . . .....................4–21

4.4.2 LPI .........................................4–22

4.4.3 Forms Control . . . .............................4–22

4.4.4 Margin Settings . . .............................4–24

4.4.5 Horizontal Tab Stops ...........................4–25

4.4.6 Vertical Tab Stops .............................4–26

4.4.7 Printer Control Straps ..........................4–26

4.5 Function Mode . . .....................................4–28

4.5.1 Printer Initialization ...........................4–28

4.5.2 Forms Setup .................................4–31

4.5.2.1 Top Of Form (TOF) . .....................4–33

4.5.3 Print Adjustment . .............................4–35

4.5.4 Forms Adjustment .............................4–36

4.5.5 Margin Setup .................................4–38

4.5.6 Reverse Form Feed ............................4–40

4.5.7 Buffer Clear ..................................4–41

Chapter 5 PRINTER DIAGNOSTICS

5.1 Introduction ..........................................5–1

5.2 Self-Tests ............................................5–1

5.2.1 Power-Up Self-Tests .............................5–1

5.2.2 Printing Self-Test . ..............................5–2

5.2.3 Operational Self-Test ............................5–2

5.2.3.1 Print Test Pattern . . ......................5–3

5.3 Alignment Tests . ......................................5–6

Chapter 6 PRINTER OPERATION

6.1 Introduction ..........................................6–1

6.2 Loading Paper . . ......................................6–1

6.3 Installing/Replacing Ribbon Cartridge ......................6–5

6.4 Re-Inking Ribbon ......................................6–7

6.5 Paper Motion . . . ......................................6–8

6.5.1 Form Feed ....................................6–8

6.5.2 Line Feed .....................................6–9

6.5.3 Forward Microstepping ..........................6–9

6.5.4 Reverse Microstepping ...........................6–9

6.5.5 Reverse Form Feeds .............................6–9

6.6 Aligning Paper . . ......................................6–9

6.7 Buffer Clear .........................................6–10

6.8 Low Paper Printing ...................................6–10

6.9 Hex Dump ..........................................6–13

Chapter 7 OPERATOR MAINTENANCE

7.1 Introduction ..........................................7–1

7.2 Operator Troubleshooting. . ..............................7–2

7.3 Printer Parameters ....................................7–5

7.3.1 Power-Up Parameters Set . . ......................7–6

7.3.2 Power-Up Parameters Retained ....................7–7

7.3.3 Reset State....................................7–8

Appendix A LED DISPLAY LIST

A.1 List of All Control Panel Readouts . . . ..................... A–1

Appendix B PARAMETER SELECTION

Appendix C LG31 COUNTRY KITS

Index

Figures

1–1 LG31 Printer ...................................1–3

2–1 Cut Straps and Remove ...........................2–3

2–2 Opening Carton . . . ..............................2–4

2–3 Removing Metal Brackets . . . ......................2–5

2–4 Positioning Ramps . ..............................2–6

2–5 Removing Printer from Pallet ......................2–7

2–6 Top of Lower Front Interior . . ......................2–8

2–7 Top View - Shuttle Area ...........................2–9

2–8 Paper Handling Hardware . . . .....................2–10

2–9 Power Connection . .............................2–13

2–10 Cover Interlock Switch ...........................2–15

3–1 Power Switch ...................................3–2

3–2 Location of the Outer Control Panel .................3–3

3–3 Outer Control Panel ..............................3–4

3–4 Cover Interlock Switch ............................3–6

3–5 Location of the Inner Control Panel ..................3–7

3–6 The Inner Control Panel ..........................3–8

3–7 Conﬁguration Menu ..............................3–9

3–8 The Inner Control Panel Showing Display, Audio Alarm,

Initialization Switch.............................3–11

3–9 Function Mode Key Operations ....................3–13

3–10 Paper Tension Lever, Print Gap Control, Margin Adjust . 3–17

vii

4–1 Serial Interface Connector . . . ......................4–2

4–2 Location of the Serial Interface Connector .............4–3

4–3 Conﬁguration Menu ..............................4–7

4–4 Interface Control Straps..........................4–10

4–5 Interface Control Speed ..........................4–11

4–6 Interface Control Parity..........................4–12

4–7 Interface Control Type ...........................4–12

4–8 Font Menu ....................................4–15

4–9 Font Style ....................................4–16

4–10 Font CPI .....................................4–17

4–11 Font Country ..................................4–18

4–12 Font Mode ....................................4–19

4–13 Font Horizontal Expansion . . .....................4–20

4–14 Font Vertical Expansion ..........................4–21

4–15 Lines Per Inch .................................4–22

4–16 Forms Control .................................4–23

4–17 Margin Settings . . . .............................4–24

4–18 Horizontal Tab Stops ............................4–25

4–19 Vertical Tab Stops . .............................4–26

4–20 Printer Control Straps — Factory Setting ............4–27

4–21 Function Mode .................................4–29

4–22 Key (4) Form Size Setup Example ..................4–33

5–1 ASCII Print Test Pattern - Sample Printout ...........5–2

6–1 Sprocket Hole Dimensioning Diagram . . . .............6–2

6–2 Paper Loading Diagram ...........................6–3

6–3 Paper Loading, Lower Tractor ......................6–4

6–4 Ribbon Cartridge Installation, Paper Gap Adjuster Setting 6–5

6–5 Ribbon Cartridge Installation, Holddown and Re-Inker . . . 6–6

6–6 Ribbon Cartridge Installation, Ribbon Guide and Striker

Bar...........................................6–8

6–7 Margin Adjust Knob.............................6–10

B–1 Conﬁguration Menu with Program Mode Parameters . . . B–2

B–2 Function Mode Options .......................... B–3

viii

Tables

1–1 LG31 Printed Circuit Boards . ......................1–5

1–2 LG31 Printer Speciﬁcations . . ......................1–6

1–3 Resident Fonts..................................1–8

1–4 Recommended Paper Weights ......................1–8

1–5 Print Speeds ...................................1–9

2–1 Default Characteristics ..........................2–18

3–1 Initial Key Functions ............................3–14

4–1 Pin Assignments . . ..............................4–4

4–2 Serial Interface Strapping Options .................4–13

4–3 Initialization Procedure ..........................4–30

4–4 Lock-Up Printer Initialization Procedure . ............4–31

4–5 Forms Setup Procedure ..........................4–32

4–6 Print Review Procedure ..........................4–35

4–7 Forms Adjustment Procedure. .....................4–37

4–8 Margin Setup Procedure .........................4–38

4–9 Reverse Form Feed Procedure .....................4–40

4–10 Buffer Clear Procedure ..........................4–41

5–1 Print Test and Diagnostic Self-Test Procedure ..........5–3

5–2 Diagnostic Fault Codes ...........................5–4

6–1 Low Paper Printing Procedure .....................6–11

7–1 Possible Mechanical Problems and Remedies ...........7–2

7–2 Possible Electrical Problems and Remedies ............7–4

7–3 Factory Settings . . . ..............................7–6

7–4 Printer Parameters Power-Up Set ...................7–7

7–5 Printer Parameters Retained on Power-Up ............7–7

7–6 Reset State Default Parameters .....................7–9

Preface

Purpose

This manual provides information on the installation and operation

of the LG31 300 LPM Line Matrix Printer. It contains instructions

and procedures to help a user install, power-up, set/load, operate, and

maintain the LG31 printer.

NOTE

The LG31 printer is installed, maintained, and supported by

Digital Equipment Corporation.

Manual Organization

This manual is organized as follows:

•Chapter 1 General Information—Contains a product overview,

operational/programming features, options, and printer speciﬁca-

tions.

•Chapter 2 Installation and Checkout – Provides step-by-step

instructions for proper unpacking/installation of the LG31 printer

and ac power cord connection.

•Chapter 3 Controls and Indicators – Describes the LG31 printer

controls and indicators.

Table des matières

Autres manuels Digital Equipment Imprimante

Digital Equipment

Digital Equipment DECprinter I Manuel utilisateur

Digital Equipment

Digital Equipment LGplus Series Manuel utilisateur

Digital Equipment

Digital Equipment LA400plus Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 1100 Series Manuel

Digital Equipment

Digital Equipment LN15 Manuel utilisateur

Digital Equipment

Digital Equipment DECwriter 110i Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel utilisateur

Digital Equipment

Digital Equipment LG06 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 2100 plus Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3500 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel

Digital Equipment

Digital Equipment LA50 Mode d’emploi

Digital Equipment

Digital Equipment LA600 MultiPrinter Manuel utilisateur

Digital Equipment

Digital Equipment LJ250 Manuel utilisateur

Digital Equipment

Digital Equipment Colorwriter LSR 2000+ Manuel utilisateur

Digital Equipment

Digital Equipment LSR 2000 Manuel utilisateur

Digital Equipment

Digital Equipment PrintServer 32 Manuel utilisateur

Digital Equipment

Digital Equipment DECwriter 500i Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 2100 Manuel utilisateur

Digital Equipment

Digital Equipment PrintServer 17/300 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 1100 Series Manuel utilisateur

Digital Equipment

Digital Equipment LG06 Manuel utilisateur

Digital Equipment

Digital Equipment LA310 Manuel utilisateur

Digital Equipment

Digital Equipment LA310 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur