Digital Equipment PrintServer 32 Manuel utilisateur

turboPrintServer20and

PrintServer32Printer

ControllerFirmware

Version3.6Upgrade

Order Number: EK–LPS2X–IN. A01

Digital Equipment Corporation

Maynard, Massachusetts

First Printing, June 1994

Digital Equipment Corporation makes no representations that the use of its products

in the manner described in this publication will not infringe on existing or future

patent rights, nor do the descriptions contained in this publication imply the granting

of licenses to make, use, or sell equipment or software in accordance with the

description.

Printed in U.S.A.

PrintServer and the DIGITAL logo are trademarks of Digital Equipment Corporation.

NetWare is a registered trademark of Novell, Inc.

All other trademarks and registered trademarks are the property of their respective

holders.

S2645

This document was prepared using VAX DOCUMENT Version 2.1.

Installing the Firmware

Software

Requirements Version 3.6 of the controller ﬁrmware ROM chips can be installed

in a turbo PrintServer 20 printer or a PrintServer 32 printer.

This version is required when:

• Booting from NetWare

• If the current ﬁrmware version is older than Version 3.1 and

booting is from one of the following:

– SCO – SGI

– AIX – Sequent

– HP-UX – Pyramid

– Solaris – UNISYS

Kit Contents The upgrade kit (order number 4A–LPS2X–FW) contains:

• ROM chips (2)

• Antistatic wrist strap

• This document

Tool

Requirements The procedure for installing the Version 3.6 controller ﬁrmware

requires the following tools:

• Flat surface — for working on the controller board

• Phillips head screwdriver — for loosening and tightening

captive screws

• Flat blade screwdriver — for extracting ROM chips

• Antistatic wrist strap — for preventing damage to electronic

components

Your upgrade kit includes an antistatic wrist strap.

Caution Take these precautions while performing the installation

procedure:

•Static electricity can damage electronic components on

the controller board. Use an antistatic wrist strap to

ground yourself to a metal object.

•Work on a ﬂat surface to keep from bending the

controller board.

•Be careful not to gouge any components on the

controller board with the screwdriver.

•Be careful when handling the ROM chips. The pins

bend easily and damage is not covered by warranty.

Installing the Firmware

Installation

Procedure To install the ROM chips:

1. Disconnect the power cord from the wall outlet and then from

the rear panel.

2. Open the operator panel cover (



3. Loosen the two captive screws from the card cage cover and

remove the cover (



4. Loosen the two captive screws securing the grounding bracket

and remove the bracket (



5. Pull open the release handles on each side of the controller

board (



) and remove the board (



Installing the Firmware

6. Extract the existing ROM chips (



) by sliding the ﬂat blade

screwdriver underneath each chip and gently loosening the

pins from their sockets.

7. Carefully align the pins on each new chip with the sockets on

the board, noting the orientation of the notch (



Note: You may ﬁnd it easier to align the pins with the sockets

if you bend in the pins slightly. The pins bend easily, so gently

rock each chip on its side, on your ﬂat work surface, to adjust

the pins for alignment.

Press the chips ﬁrmly and evenly to seat them in their sockets.

277E8

276E8

8. Slide the controller board back into the unit.

9. Replace the grounding bracket and tighten the captive screws.

10. Replace the card cage cover and tighten the captive screws.

11. Reconnect the power cord and the Ethernet cable.

Veriﬁcation

Procedure To verify correct installation of the chips, power on the printer.

The power-up diagnostics run and the following display appears

on the operator panel:

XX-XX-XX-XX-XX-XX

2.1 XX XX

If the operator panel is blank, either the board is not fully seated

or the chips are not installed correctly.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Digital Equipment Imprimante

Digital Equipment

Digital Equipment Colorwriter LSR 2000+ Manuel utilisateur

Digital Equipment

Digital Equipment DECwriter 500i Manuel utilisateur

Digital Equipment

Digital Equipment LA310 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel utilisateur

Digital Equipment

Digital Equipment LA75 plus companion Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel utilisateur

Digital Equipment

Digital Equipment LG06 Manuel

Digital Equipment

Digital Equipment LG31 Guide de l'administrateur

Digital Equipment

Digital Equipment LGplus Series Manuel utilisateur

Digital Equipment

Digital Equipment LA50 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3500 Manuel utilisateur

Digital Equipment

Digital Equipment DECprinter I Manuel utilisateur

Digital Equipment

Digital Equipment LA310 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 2200 Manuel

Digital Equipment

Digital Equipment LA600 MultiPrinter Guide de démarrage rapide

Digital Equipment

Digital Equipment LSR 2000 Manuel utilisateur

Digital Equipment

Digital Equipment LJ250 Manuel utilisateur

Digital Equipment

Digital Equipment DEClaser 3200 Manuel

Digital Equipment

Digital Equipment DEClaser 2200 Manuel utilisateur

Digital Equipment

Digital Equipment LA50 Mode d’emploi

Digital Equipment

Digital Equipment DEClaser 2100 plus Manuel utilisateur

Digital Equipment

Digital Equipment LN17 Manuel utilisateur

Digital Equipment

Digital Equipment LG plus Series Manuel utilisateur

Digital Equipment

Digital Equipment LA30 N Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur